NETGEAR WAX202 Wi-Fi 6 AX1800 Dual Band Access Point Installation Guide

NETGEAR WAX202 Wi-Fi 6 AX1800 Dual Band Access Point

Installation

Note: The DC power adapter varies by region.

Connect and power up the WAX202

Step 1

Join the default WiFi Network

Step 2

 Log in via your web browser

Step 3

Note: This example uses the Google Chrome browser. Your browser might be different.

1. Type https://www.routerlogin.net in the address field of your browser. Your browser might display a security message.
2. Click the Advanced button.
3. Click the Continue to routerlogin.net link.
4. Follow the onscreen Setup Wizard prompts:
   • Set a new admin password for local login.
   • You can set a new WiFi network name (SSID) and WiFi password. If you do, reconnect with your new SSID and WiFi password to complete the setup.

Change the operation mode

Optional Step 4

If a device in your network already provides router functions, change to access point mode.

1.  When logged in to the WAX202, select ADVANCED > Advanced Setup > Router / AP / Bridge Mode.
2. Select the AP Mode radio button and click the Apply button.

References

• English - NETGEAR Communities
• NETGEAR Support | NETGEAR
• Router Login & Setup | NETGEAR
• NETGEAR Terms and Conditions | NETGEAR
• Download Center | Downloads and Documentation | NETGEAR
• Download Center | Downloads and Documentation | NETGEAR

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>