HAPPYAUDiO S1 True wireless Bluetooth Earbuds User Manual

User Manual

Package Content

Product Specifications

Control

| Power on| Automatic: Open the charging case. the earbuds will automatically poker on. Manual: Long press the MFB for 2s in shutdown status.
---|---|---
| Power of| Automatic: Place the earbuds back into the roe charging case and close the lid.Manual: Long press the MFB fag 55 in, working status.
| Play/Pause| Double Tap MFB(L/R)
| Play previous| Tap and hold the MFB for 1.5 s (L)
| Play Next| Tap and hold the MFB for 1.5 s (R)
| Answer /Hang-up Phone Cal| Double Tap MFB(L/R)
| Reject Rhone Call|
| Volume +| Tap MFB(R) Once
| Volume –| Tap MFB(L) Once
| Switch between two calls| Long press MFB(L/R) for 1.5s
| Activate Voice Assistant| Triple Tap MFB(L/R)

Wearing

1. Choose the ear tips that fit your ears the best
2. Insert the earbuds into the inner canal of your ears
3. Turn and find the most comfortable position.

Pairing&Reconnecting

1. Open the charging case, the earbuds will automatically power on and enter the TWS matching state. After successfully connected, one side of the left and right earbuds will alternately flash white and red, which indicates that the earphone has entered pairing mode.
2. Please find the Bluetooth name ‘MAPPVAUDIO St’ in the Bluetooth list of devices, click to connect, and the ‘Connected’ prompt will be announced after a successful connection.
3. HAPPY AUDIO Si can memorize previously connected devices. When you set it up a connection a second time, all you have to do is to activate the Bluetooth in the device and remove the left and right earphones at the same time. They will automatically connect and reconnect to the device. Otherwise, please choose the name of the headset from your BlueTooth list to connect.
4. Mono mode: After finishing the pairing process of HAPPY AUDIO Si, the left and right earphones can be used separately.

LED behavior (Earbuds)

| Alternately Rapid flashing White and red|  TWS connecting
---|---|---
| Alternately slow flashing White and red| Bluetooth connection with the device
| Lights off| Bluetooth connection with the device

Reset
Please follow the following steps to reset the earphone if you fail to pair between two earbuds, or between earphones and device

1. Delete the pairing information of the earphone from the device;
2. When earbuds are in off status,long-press the MFB of R Earbuds and the L earbuds at the same time for us until the indicator flashes red and white, then the process of resetting is completed.

Charging
HAPPY AUDIO Si is equipped with a charging box, which can not only charge the earphones, but also a convenient box for carrying and storing earphones. The built-in rechargeable battery can charge L and R earphones 6 times.

Charging the earphones
The earbuds have been partially charged at the factory

1. Please make sure they are fully charged before the first time used.
2. Please place back the earbuds in the case and close the lid to charge the earbuds when you don’t use them.

Charging the Charging box

1.  The USB charging port is behind the charging case, the LED indicator is on the front of the charging case;
2. During the charging, the indicator light flashes to show the remaining power of the charging case is as follows:

Note:

1.  Connect to a USB charging adapter to charge it (charging current does not exceed 1A);
2. When not used for a long time, please charge it once every three months at least.

Warranty Regulations
For the proxy purchased from we original buyer, we began to guarantee the eavtones for a period of 12 months The warranty is United to manufacturing defects.
www.happyaudio.cn  
service@l63.com

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

MANUFACTURER
DONGGUAN BINSHI ELECTRONIC TECHNOLOGY CO., LTD.
QiLangWei Industrial Area , Tangjiao Village, Chashan Town, Dongguan City, Guangdong Province, China
www.happyaudio.cn
happyaudio_service@l63.com 

FCC ID: 2ATJ2-822105
MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>