AJAX Button Wireless Panic Button with Protection User Manual

: June 6, 2024
: ajax

Table of Contents

Functional elements
Operating principle
Connecting the button to the Ajax security system
States
Operating indication
Use cases
Control Mode
Mute Fire Alarm
**Placement
Technical Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Button User Manual
Updated March 26, 2021

The button is a wireless panic button with protection against the accidental press and an additional mode to control automation devices.

The button is compatible with Ajax hubs only. No support for Oxbridge Plus and cartridge integration modules!

The button is connected to the security system and con guard via Ajax apps on iOS, Android, macOS, and Windows. The users are alerted of all alarms and events via push notifications, SMS, and phone calls (if enabled).

Buy panic button Button

Functional elements

Alarm button
Indicator lights
Button mounting hole

Operating principle

The button is a wireless panic button that, when pressed, transmits an alarm to users, as well as to the security company’s CMS. In Control mode, Button allows you to control Ajax automation devices with a short or long press of a button.
In panic mode, the Button can act as a panic button and signal about a threat, or inform about an intrusion, as well as are, gas or medical alarm. You can choose the type of alarm in the button settings. The text of alarm not cations depends on the selected type, as well as the event codes transmitted to the central monitoring station of the security company (CMS).

You can bind the action of an automation device (Relay, WallSwitch or Socket) to a button press in the Button settings — Scenarios menu.

The Button is equipped with protection against the accidental press and transmits alarms at a distance of up to 1,300 m from the hub. Please be aware that the presence of any obstructions that impede the signal (for example, walls or doors) will reduce this distance.

The button is easy to carry around. You can always keep it on a wrist or a necklace. The device is resistant to dust and splashes.

When connecting Button via ReX, note that Button does not automatically switch between the radio networks of the radio signal extender and the hub. You can assign Button to another hub or ReX manually in the app.

Connecting the button to the Ajax security system

Prior to initiating the connection

Follow the hub instructions to install the Ajax application. Create an account, add a hub to the app, and create at least one room.
Enter the Ajax app.
Activate the hub and check your internet connection.
Ensure that the hub is not in armed mode and is not being updated by checking its status in the app.

Only users with administrative rights can add a device to the hub

In order to connect a Button

Click on Add Device in the Ajax app.
Name the device, scan its QR code (located on the package) or enter it manually, select a room and a group (if group mode is enabled).
Click Add and the countdown will begin.
Hold the button for 7 seconds. When the Button is added, the LEDs will ash green once.

For detection and pairing, the Button must be located within the hub radio communication zone (on the single protected object).

The connected button will appear in the list of hub devices in the application. Updating the statuses of the device in the list does not depend on the polling time value in the hub settings. Data is updated only by pressing the Button.

The Button only works with one hub. When connected to a new hub, the button Button stops transmitting commands to the old hub. Note that after being added to the new hub, the Button is not automatically removed from the device list of the old hub. This must be done manually through the Ajax application.

States

Button statuses can be viewed in the device menu:

Parameter	Value
First	The name of the device can be changed
Room	The choice of the virtual room that the device is assigned to
Operating mode	Displays the operating mode of the button.

Three modes are available:

Panic — sends an alarm when pressed
Control — controls automation devices by short or long (2 sec) pressing
Mute Interconnected Fire Alarm — when pressed, mutes the alarm of FireProtect/FireProtect Plus detectors. The option is available if the Interconnected FireProtect Alarms feature is enabled

Alarm type

(available only in panic mode)

| Selection of the Button alarm type:

Intrusion
Fire
Medical
Panic button
Gas

The text of SMS and noti application depends on the selected type of alarm

LED Brightness| This displays the current brightness of the indicator lights:

Disabled (no display)
Low
Max

Accidental press protection (available only in panic mode)| Displays the selected type of protection against
accidental activation:

Off — protection disabled.
Long press — in order to send an alarm you should hold the button down for more than 1.5 seconds.
Double press — in order to send an alarm you should double-press on the button with a pause of no more than 0.5 seconds.

Alert with a siren if the panic button is pressed| If active, sirens added to the system are activated after panic button pressing
Scenarios| Opens the menu for creating and con scenarios
User Guide| Opens the Button user guide
Temporary Deactivation| Allows a user to deactivate the device without deleting it from the system.

The device will not execute system commands and participate in automation scenarios. The panic button of a deactivated device is disabled

Learn more about device temporary deactivation

Unpair Device| Disconnects Button from the hub and deletes its settings

Operating indication

Button status is indicated with red or green LED indicators.

Category	Indication	Event
Linking to security system	Green LEDs	The button is not registered in any

security system
Lights up green for a few seconds| Adding a button to the security system
Linking to security system| Lights up green brie| The command is delivered to the security system
Lights up red brie| The command is not delivered to the security system
Long press indication in Control mode| Blinks green brie| Button recognized the pressing as a long press and sent the corresponding command to the hub
Feedback Indication (follows the Command Delivery Indication)| Lights up green for about half a second after the command delivery indication| The security system has received and performed the command
Breed after the command delivery indication| The security system did not perform the command
Battery status (follows Feedback Indication)| After the main indication, it lights up red and goes out smoothly| The button battery needs to be replaced. At the same time, button commands are delivered to the security system Battery Replacement

Use cases

Panic Mode

As a panic button, the Button is used to call for a security company or help, as well as for emergency notiough the app or sirens. Button support 5 types of alarms: intrusion, e, medical, gas leak, and panic button. You can choose the type of alarm in the device settings. The text of alarm noti on the selected type, as well as the event codes transmitted to the central monitoring station of the security company (CMS).

Consider, that in this mode, pressing the Button will raise an alarm regardless of the security model of the system.

An alarm if Button is pressed can also run a scenario in the Ajax security system.

The button can be installed on a face or carried around. To install on a surface (for example, under the table), secure the Button with double-sided adhesive tape. To carry the Button on the strap: attach the strap to the Button using the mounting hole in the main body of the Button.

Control Mode

In the Control mode, the Button has two pressing options: short and long (the button is pressed for more than 3 seconds). These pressings can trigger the execution of an action by one or more automation devices: Relay, wall switch, or Socket.

To bind an automation device action to a long or short press of a Button:

Open the Ajax app and go to the Devices tab.
Select the Button in the list of devices and go to settings by clicking the gear icon .
Select the Control mode in the Button mode section.
Click the button to save the changes.
Go to the Scenarios menu and click Create scenario if you are creating a scenario for the Add scenario if scenarios have already been created in the security system.
Select a pressing option to run the scenario: Short press or Long press.
Select the automation device to execute the action.
Enter the Scenario Name and specify the Device Action to be executed by pressing the Button.
• Switch on
• Switch off
• Switch the state
When cony, which is in pulse mode, the Device Action setting is not available. During the scenario execution, this relay will close/open the contacts for a set time. The operating mode and pulse duration are set in the. Relay settings
Click Save. The scenario will appear in the list of device scenarios.

Mute Fire Alarm

By pressing the Button, the interconnected e detectors alarm can be muted (if
the corresponding operating mode of the button is selected). The reaction of the
system to pressing a button depends on the state of the system:

The Interconnected FireProtect Alarms have already propagated — by the ess of the Button, all e detectors sirens are muted, except for those that registered the alarm. Pressing the button again mutes the remaining detectors.
The interconnected alarms delay time lasts — the siren of the triggered FireProtect/FireProtect Plus detector is muted by pressing.

Learn more about interconnected alarms of e detectors

**Placement

**

The button can be ed on a surface or carried around.

How to fix button
To on a surface (e. g. under a table), use Holder.

To install the button in the holder:

Choose a location to install the holder.
Press the button to test whether the commands can reach the hub. If not, choose another location or use a ReX radio signal range extender.
When connecting Button via ReX, keep in mind that the button does not automatically switch between range extender and hub. You can assign a Button to a hub or another ReX in the Ajax app.
Fix Holder on the surface using the bundled screws or double-sided
adhesive tape.
Put Button into the holder.

Please note that Holder is sold separately.

Buy Holder

How to carry around Button
The button is convenient to carry with you thanks to a special hole on its body. It can be worn on the wrist or around the neck, or hung on a key ring. Button has an IP55 protection rating. This means that the device’s body is protected from dust and splashes. Tight buttons are recessed into the body and software protection helps to avoid accidental pressing.

Maintenance

When cleaning the key fob body, use cleaners that are suitable for technical maintenance.
Never use substances containing alcohol, acetone, gasoline, and other active solvents to clean the Button.
The pre-installed battery provides up to 5 years of key fob operation in normal use (one press per day). More frequent use may reduce battery life. You can check the battery levels at any time in the Ajax app.
Keep new and used batteries away from children. Do not ingest battery, Chemical Burn Hazard.
The pre-installed battery is sensitive to low temperatures and if the key fob is a cooled sign, the battery level indicator in the app may show incorrect values until the key fob becomes warmer.
The battery level value is not updated on a regular basis, but only updates after pressing the button.
When the battery has run down, the user will receive a notice app, and the LED will steadily light up red and go out each time the button is pressed.

How long Ajax devices operate on batteries, and what affects this Battery Replacement

Technical Specifications

Number of buttons	1
LED backlight indicating command delivery	Available
Protection against accidental activation	Available, in panic mode
Frequency band	868.0 – 868.6 MHz or 868.7 – 869.2 MHz, depending on the sales

region
Compatibility| Operates with all Ajax, and hubs range featuring OS Malevich 2.7.102 and extenders later
---|---
Maximum radio signal power| Up to 20 mW
Radio signal modulation| GFSK
Radio signal range| Up to 1,300 m (without obstacles)
Power supply| 1 CR2032 battery, 3 V
Battery life| Up to 5 years (depending on the frequency of use)
Protection class| IP55
Operating temperature range| From -10°С to +40°С
Operating humidity| Up to 75%
Dimensions| 47 × 35 × 13 mm
Weight| 16 g

Complete Set

Button
Pre-installed CR2032 battery
Double-sided tape
Quick Start Guide

Warranty
The warranty for the products manufactured by the AJAX SYSTEMS
MANUFACTURING limited liability company is valid for 2 years after purchase and does not extend to the bundled battery.
If the device does not function properly, we recommend that you the support service as technical issues can be resolved remotely in half of the cases!
Warranty obligations

User agreement
Technical support: [email protected]