STREAMING STUDIO 373380 LED Ring Light and Phone Holder Instructions

STREAMING STUDIO 373380 LED Ring Light and Phone Holder

Instructions for use
Please read these instructions thoroughly before use and retain for future reference.

Getting started

• Remove the LED ring light and phone holder from the box.
• Remove any packaging from the product.
• Place the packaging inside the box and store for safekeeping.

In the box
LED ring light and Phone Holder

Safety Instructions

Please read all instructions carefully before using the LED ring light and phone holder and retain them for future reference. If you pass this product onto another person ensure that you also pass these instructions too.
When using this unit, basic safety precautions should always be followed:

• Ensure all parts are correctly assembled and the product is placed on a level surface.
• This unit is not a toy.
• This unit contains no user serviceable parts. If the unit and any of its accessories are malfunctioning or it has been dropped or damaged, only a qualified person should carry out repairs. Improper repairs may place the user at risk of harm.
• Keep the unit out of reach of children.
• Keep the unit away from heat or sharp edges that could cause damage.
• Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquid.
• Keep the unit free from dust, lint etc.
• Do not operate the unit in water or any other liquid.
• Do not operate the unit with wet hands.
• Do not operate the unit if it has been exposed to water, moisture or any other liquid, to prevent against injury to yourself and damage to the unit.
• Do not use the unit for anything than its intended use.
• Do not store the unit in direct sunlight or in high humidity conditions.
• Do not put objects into any of the openings.
• Always ensure your device is firmly fitted into the phone holder.
• This unit is intended for domestic use only. It should not be used for commercial purposes.

Warning: Keep the unit away from flammable materials.

warm yellow light.
9| + button| Press the button to increase the brightness of the LED lamps.
10| USB power cable| Connect USB power cable to a USB wall charger (not included).

Assembly Instructions

Assemble as shown above

Power On

1. Connect USB power cable to a USB port or a USB wall charger (not included).
2. Press the On/Off button to turn on the LED ring light and phone holder

Cleaning and Maintenance

If necessary, please use a soft cloth to clean the item

• Do not expose the item to liquid, moisture or humidity.
• Do not use any abrasive cleaning solvents to clean the item as this can cause damage.
• Do not expose the item to sharp objects, which may cause damage.
• Do not expose the item to extremely high or low temperatures.
• Do not drop the item.
• Do not attempt to dissemble the item, as this may cause damage to the unit.
• Do not dispose of the item in a fire.

Storage

Before storing the item, ensure that it is clean and dry. Store in a cool and dry place.

Do’s and Don’ts

Read the following recommendations before using the LED ring light and phone holder. Following these you will be able to enjoy the product for many years.

• Avoid direct spray of liquids. Do not immerse in any liquid.
• Don’t use abrasive cleaning solvents to clean the product.
• Do not expose the product to extremely high or low temperature as this will shorten the life of electronic devices, distort certain plastic parts.
• Don’t expose the product to contact with sharp objects as this will cause scratches and damage.
• Don’t let the product drop on to the floor. The internal circuitry might get damaged.
• Do not attempt to disassemble the product.
• Do not expose the product to heat or fire. Avoid storage in direct sunlight.
• Do not subject the product to mechanical shock.
• Do not use the product if it has been damaged in any way.

Specifications

EC Declaration
This product complies with the below listed EU Directives

• 2014/30/EU Electromagnetic Compatibility Directive
• 2011/65/EU Restriction of Hazardous Substances

The complete declaration of conformity is available upon request for relevant enquiries.

Information on Waste Disposal for Consumers of Electrical & Electronic Equiment
This mark on a product and/or accompanying documents indicates that when it is to be disposed of, it must be treated as Waste Electrical & Electronic Equipment (WEEE). Any WEEE marked waste products must not be mixed with general household waste, but kept separate for the treatment, recovery and recycling of the materials used.
For proper treatment, recovery and recycling; please take all WEEE marked waste to your Local Authority Civic waste site, where it will be accepted free of charge. If all consumers dispose of Waste Electrical & Electronic Equipment correctly, they will be helping to save valuable resources and preventing any potential negative effects upon human health and the environment, of any hazardous materials that the waste may contain.

Made in China
B&M Retail Limited, Dakota Drive, Speke, Liverpool, L24 8RJ, UK Centz Stores 7 Limited, 5 Old Dublin Road, Dublin, A94 K1H5, Ireland

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>