STREAMING STUDIO 372506 Tripod Led Ring Light Instructions

STREAMING STUDIO 372506 Tripod Led Ring Light

Instructions for use

Please read these instructions thoroughly before use and retain for future reference.
Getting started
Remove the Streaming studio Tripod LED Ring Light from the box.
Remove any packaging from the product.
Place the packaging inside the box and store for safekeeping.
In the box
Tripod LED Ring Light
Tripod
Instruction Manual

Safety Instructions

Please read all instructions carefully before using the
item and retain them for future reference. If you pass this product onto another person ensure that you also pass these instructions too.
When using this unit, basic safety precautions should always be followed:

• Ensure all parts are correctly assembled and the product is placed on a level surface.

• This unit is not a toy.
  This unit contains no user serviceable parts. If the unit and any of its accessories are malfunctioning or it has been dropped or damaged, only a qualified person should carry out repairs. Improper repairs may place the user at risk of harm.

• Keep the unit out of reach of children.

• Keep the unit away from heat or sharp edges that could cause damage.

• Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquid.

•  Keep the unit free from dust, lint etc.

•  Do not operate the unit in water or any other liquid.

•  Do not operate the unit with wet hands.

•  Do not operate the unit if it has been exposed to water, moisture or any other liquid, to prevent against injury to yourself and damage to the unit.

•  Do not use the unit for anything than its intended use.

•  Do not store the unit in direct sunlight or in high humidity conditions.

•  Do not put objects into any of the openings.

•  Do not short – circuit.

•   Do not stack up with other electrical or electronic device(s) to avoid overheating.

• This unit is intended for domestic use only. It should not be used for commercial purposes.

• Don’t expose to extreme temperatures of hot or cold. For example, do not leave it in a parked car where it could get very cold in winter or very hot in summer.

• The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

Warning: Keep the unit away from flammable materials.

Product View

screw.
6| Tripod Legs| Pull open it and make it stand on the floor.
7| USB Power Cable| Connect USB power cable to a USB Adapter(not included).
8| On / Off Button| Press to turn light on or off.
9| -button| Press the button to reduce the brightness of the LED light.
10| Light Mode Button| Press the button to switch between white, warm white, warm yellow light.
11| +button| Press the button to increase the brightness of the LED light.

Assembly Instructions

•  Take the tripod out of the box.(Figure1)
•  Pull open the tripod, Unscrew counterclockwise, Fully extended telescopic arm. Then tighten the locking mechanism clockwise rotation. (Figure2)
• Install rotatable holder.(Figure3)
•  Install the lamp ring.(Figure4)
•  Install metal rod.(Figure5)
•  Install mobile phone gripper. (Figure6)

Power On:

•  Connect USB power cable to a USB port or a USB adapter(not included).
•  Press the On/Off button to turn On the Desktop LED Ring Light.

NOTE: Always be careful when extending or collapsing the Tripod stand to avoid trapped fingers etc., always ensure the stand is placed on a flat level surface and ensure it is completely stable before use.

Cleaning and Maintenance

If necessary, please use a soft cloth to clean the item.

•  Do not expose the item to liquid, moisture or humidity.
•  Do not use any abrasive cleaning solvents to clean the item, as this can cause
•  Do not expose the item to sharp objects, which may cause damage.
•  Do not expose the item to extremely high or low temperatures.
•  Do not drop the item.
•  Do not attempt to dissemble the item, as this may cause damage to the unit.
•  Do not dispose of the item in a fire.

Storage
Before storing the item, ensure that it is clean and dry.
Store in a cool and dry place.

Do’s and Don’ts
Read the following recommendations before using the selfie light. Following these you will be able to enjoy the item for many years.

•  Avoid direct spray of liquids. Do not immerse in any liquids.
•  Don’t use abrasive cleaning solvents to clean the product.
•  Do not expose the item to extremely high or low temperature as this will shorten the life of electronic devices, distort certain plastic parts.
•  Do not dispose of the item shorten the life of electronic devices, distort certain plastic parts.
•  Don’t expose the item to contact with sharp objects as this will cause scratches and damage.
•  Do not dispose of the item scratches and damage.
•  Don’t let the item drop on to the floor. The internal circuitry might get damage.
•  Do not attempt to disassemble the product.
•  Do not expose the item to heat or fire. Avoid storage in direct sunlight.
•  Do not subject the item to mechanical shock.
•  Do not use the item if it has been damaged in any way.

Specifications

EC Declaration
This product is intended for use within UK
This product complies with the below listed EU Directives
2014/30/EU Electromagnetic Compatibility Directive
2014/35/EU Low Voltage Directive
2011/65/EU Restriction of Hazardous Substances
The complete declaration of conformity is available upon request for relevant enquiries.

Information on Waste Disposal for Consumers of Electrical & Electronic Equiment

This mark on a product and/or accompanying documents indicates that when it is to be disposed of, it must be treated as Waste Electrical & Electronic Equipment (WEEE).
Any WEEE marked waste products must not be mixed with general

household waste, but kept separate for the treatment, recovery and recycling of the materials used.
For proper treatment, recovery and recycling; please take all WEEE marked waste to your Local Authority Civic waste site, where it will be accepted free of charge. If all consumers dispose of Waste Electrical & Electronic Equipment correctly, they will be helping to save valuable resources and preventing any potential negative effects upon human health and the environment, of any hazardous materials that the waste may contain.

Made in China
B &M Retail Limited, Dakota Drive, Speke, Liverpool, L24 8RJ, UK Centz Stores 7 Limited, 5 Old Dublin Road, Dublin, A94 K1H5, Ireland

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>