SMART RADAR SYSTEM IRISc-03A Milimeter Wave Radar User Manual
- June 6, 2024
- Smart Radar System
Table of Contents
SMART RADAR SYSTEM IRISc-03A Milimeter Wave Radar User Manual
IRISc-03A
A-7F, 253, Pangyo-ro, Bundang-gu,
Seongnam-si, Gyeonggi-do, (13486),
South Korea
Tel : +82-31-8018-7188
Fax : +82-31-8018-7189
http://www.smartradarsystem.com
1. Overview
1.1 General Description
IRISc-03A is an innovative product designed for industrial & automotive market
segment. It serves as the sensor for environment detection to detect human,
vehicle or objects around the object. It is the reliable guardian for a car
which can be used to remove blind spots, to detect front or rear crossing
traffics, to recognize objects, etc. IRISc-03A consists of a RM14-03A radar
module as well as its housing part of the product. Using millimeter radio
waves, the RM14-03A provides the ability to effectively detect objects in
areas close to the vehicle and alert the vehicle driver. Relatively compact
RM14-03A is provided with tiny form-factor to feature its usage performance
for designated industrial vehicles market.
RM14-03A refers to a module in which AWR1443 radar IC is mounted on an RM1403
PCB. The AWR1443, TI’s integrated single-chip mmWave sensor which integrates
radar front end, hardware accelerators, ARM, and DSP in one CMOS chip, can
embed the application software on the radar module. SRS’s unique antenna
design technology and algorithms using the device have enabled the reliable
detection performance under various environments.
Smart Radar System provides the RM14-03A module in different form factors
according to customer’s needs. RM14-03A can be provided with a carrier board
for easy PC-based testing. But when the customer decides the actual use cases
for the adoption of the radar, RM14-03A will be included inside the actual
product formfactor, so differentiated as IRISc (Intelligent Radar for
Immersive Sensing for Construction) & IRISt (Intelligent Radar for Immersive
Sensing for Twin). The housing both has its advantages and purpose.
1.2 Features
- Innovative industrial vehicle product
- Max 4 GHz bandwidth (77-81 GHz), FMCW (Frequency Modulated Continuous Wave)
- Communication with a vehicle or hosts through CAN interface
- 12V / 24V to power the Sensor
1.3 Product Appearance
IRISc-03A
RM14-03A Radar Module
IRISc-03A Front
IRISc-03A Back
2. Product
2.1 Absolute Maximum Ratings
2.2 Operating Conditions
2.3 Performance Specifications
※ Specifications in this datasheet are subject to change without notice.
※ Any specifications not determined in the above table are under test and will
update for details
2.4 Connections
2.5 Mechanical Specifications
IRISc-03A Mechanical Specification
RM14-03A Module’s Mechanical Specification
2.6 CAN Protocol
The rear radar uses CAN protocol to communicate with the host system.
- CAN version: Supports CAN 2.0 A, B
- Speed: 1Mbps
- Data structure:
3. Notice
3.1 FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device should be installed and operated with minimum 20 cm between the radiator and your body.
3.2 IC
This device contains licence-exempt transmitter(s)/receiver that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:(1) This device may not
cause interference.(2) This device must accept any interference, including
interference that may cause undesired operation of the device.
This equipment should be installed and operated with minimum 20 cm between the radiator and your body.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>