SereneLife SLCATL360 Outdoor Portable Toilet User Guide
- June 5, 2024
- serenelife
Table of Contents
SereneLife SLCATL360 Outdoor Portable Toilet
Introduction
The portable toilet provides simple operation and convenient disposal of
waste. Before using your porta-ble toilet, we recommend that you read this
manual completely. Become familiar with your portable toilet and its
components parts. As with any quality product, proper use and operation
eliminates unnecessary maintenance.
Features
- High-Density Polyethylene Construction
- Built-in Carry Handles for Easy Transport
- Well-Constructed Adult Sized Seat and Lid
- Completely Self-Contained
- No External Water or Power Connections Needed
- Attractive Matte Finish Conceals Marks and Allows Scrubbing without Damage
- Double Sealed Drain Valve Protects Against Leakage and Odor
- Heavy-Duty, Corrosion Resistant Side Latches Lock Tanks Together
- Detached Waste Holding Tank is Easy to Empty
- Enhanced T-type 3 Directional Flush Nozzle Guaranties a Full Bowl Coverage
- Waste Level Indicator tells when to Empty
- Non-Splash Rotating Empty Spout
- Durable carry bag for easy transport & storage
- Useful Toilet Hand Sprayer helps to clean toilet, more hygienic
What’s in the Box:
- Portable Toilet
- Oxford Carrying Bag
- Toilet Hand Sprayer
Technical Specs:
- Waste Holding Tank Capacity: 5.8 Gallon
- Fresh Water Tank Capacity: 3.2 Gallon, up to 100 Flushes
- Flush Pump Type: Piston Pump
- Empty Type: Rotating No-Splash Pour Spout
- Construction Material: High-Density Polyethylene
- Product Dimensions (L x W x H): 16.5’’ x 14.6’’ x 17.1’’ -inches
PART LISTING
| No. | Part No. | Description |
|---|---|---|
| 1 | CHH-T-009 | Seat Cover |
| 2 | CHH-T-010 | Seat |
| 3 | CHH-T-011 | Cap, Fresh Water Holding Tank |
| 4 | CHH-T-015 | Fresh Water Tank Assembly |
| 5 | CHH-T-019 | Piston Pump Assembly |
| 6 | CHH-T-012 | Side Latch Assembly |
| 7 | CHH-T-021 | Rotating Empty Spout |
| 8 | CHH-T-003 | Waste Holding Tank: 22L |
| 9 | CHH-T-024 | Level Indicator |
| 10 | CHH-T-004 | Slide Valve Assembly |
| 11 | CHH-T-023 | Vent Button |
SAFETY INSTRUCTION
- Handle with care.
- Avoid exposure to direct sunlight for extended periods of time.
- To avoid injury, DO NOT lean against lid when being used.
- Ensure waste tank is cleaned regularly.
MAINTENANCE
- Lubricate Slide Valve seals periodically with silicone spray or white grease lubricant.
- Clean exterior of toilet with a mild, non-abrasive bathroom cleaner.
OPERATION/HOW TO USE
-
Fill upper water tank with clean water (Fig.1)
-
Pull out slide valve handle before use. (Fig. 2)
Caution: Always press the vent button to release air pressure inside the waste holding tank to avoid waste spills before opening the slide valve. -
Flush the toilets by depressing piston pump up and down 2 or 3 times. (Fig. 3)
-
After flush, push the handle back in. (Fig. 4)
TO EMPTY HOLDING TANK
- Empty the waste holding tank when the level indicator turns from green to red. (Fig.5)
- Make sure the slide valve is closed and separate two tanks by disengaging side latches. (Fig.6)
- Carry holding tank to permanent toilet facility. (Fig.7)
- Remove the cap of rotating empty spout.
- Empty contents into permanent toilet (*Press the vent button to avoid splash) (Fig.8)
- Rinse tank thoroughly. Reassemble unit and prepare for next use.
STORAGE
To store Portable Toilet when not in use:
- Empty the top tank and waste holding tank.
- Make sure all water is cleared from the flush pump by depressing pump several times.
- Stored away from direct sunlight.
Note: A small amount of water may remain in the top tank but will be harmless during storage.
Questions? Comments?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>