NiTHO MLT-DP16-K Drive Pro V16 Racing Wheel User Guide

: June 6, 2024
: NiTHO

Table of Contents

SPECIFICATIONS
BUTTON LAYOUT
FUNCTION KEYS
FUNCTION INTRODUCTION
PLATFORMS
TROUBLE SHOOTING
PRECAUTIONS
SERVICE & SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**NiTHO MLT-DP16-K Drive Pro V16 Racing Wheel User Guide

**

SPECIFICATIONS

THANK YOU FOR CHOSING NiTHO DRIVE PRO WHEEL. WE WOULD LIKE TO INTRODUCE ITS SPECIFICATIONS :

A. Compatible with Windows® 10, PS3®, PS4®, XBOX ONE®, SWITCH® and supports US, EU, Japan versionsconsoles **B.** Home button to enter into Settings on PS3®, PS4®, XBOX ONE® consoles **C.** Its provided with 2 axis, D-pad and 12 action buttons
D. 8 programmable buttons: R-Paddle, L-Paddle, Brake pedal, Accelerator pedal, L3, R3, Gear Stick
E. 6 suction cups to keep the wheel stable
F. 270 degrees wheel rotation, lock to lock
G. Three selectable sensitivity levels
H. Spring loaded pedals
I. X-INPUT & D-INPUT modes selector (X-INPUT mode as default)
J. Table clamps

BUTTON LAYOUT

FUNCTION KEYS

Mode| P53®| PS4®| XBOX ONE| PC
(X-INPUT)| PC
(D-INPUT)| SWITCH®
---|---|---|---|---|---|---
Action Key| X| X| A| A| 2| B
| | B| B| 3| A
| | X| X| 1| Y
| | Y| Y| 4| X
R1| RI| RB| RB| 6| R
L1| L1| LB| LB| 5| L
R2| R2| RT| RT| 8| ZR
U| L2| LT| LT| 7| ZL
R3| R3| SR| SR| 12| R3
U| L3| SL| SL| 11| U
UP| UP| UP| UP| UP| UP
D-pad| DOWN| DOWN| DOWN| DOWN| DOWN| DOWN
LEFT| LEFT| LEFT| LEFT| LEFT| LEFT
RIGHT| RIGHT| RIGHT| RIGHT| RIGHT| RIGHT
Function Key| START| OPTIONS| Menu| Menu| 10| +
SELECT| SHARE| View| View| 9| –
Direction| LX| LX| | | | LX
L-wing| | L2| LT| LT| 1| B
R-wing| X| R2| RT| RT| 2| Y
L-pedal| | U| LT| LT| 1| B
R-pedal| X| R2| RT| RT| 2| Y
Mode Button| HOME| HOME| X-Guide| X-Guide| 13| HOME
Gear Shift| I-2| 11| LB| LB| 7| ZL
R2| R1| RB| RB| 8| ZR
A| A| Y| Y| 4| X

FUNCTION INTRODUCTION

PROGRAM FUNCTIONS

INTRODUCTION TO THE SETUP
You can assign to the (PROGRAMMABLE) buttons the functions of the (DEFAULT) buttons

The DEFAULT buttons are : □/X, ○/B, △/Y, X/A, L1/LB, L2/LT, R1/RB, R2/RT
The PROGRAMMABLE buttons are : L-Paddle , R-Paddle , Accelerator pedal , Brake pedal, L3/SL, R3/SR, Gear-shift

HOW TO CUSTOMIZE YOUR SETUP

Press & hold “SHARE” + “OPTIONS” for 3 seconds until the LED change colour
Press the PROGRAMMABLE button until the LED starts blinking
Press the DEFAULT button until the LED stops blinking

HOW TO RESET TO DEFAULT A PROGRAMMATION

Press & hold “SHARE” + “OPTIONS” for 3 seconds until the LED changes colour
Press the programmed button until the LED starts blinking
Press the programmed button until the LED stops blinking

HOW TO RESET TO DEFAULT ALL THE PROGRAMMATIONS

Press & hold “SHARE” + “OPTIONS” for 3 seconds until the LED changes colour
Press & hold “OPTIONS” for 4 seconds until the LED changes colour again All the programmed buttons are cleared

HOW TO SETUP THE PEDALS AS ACCELERATOR & BRAKE

Press & hold “SHARE” + “OPTIONS” for 3 seconds until the LED changes colour
Press D-PAD LEFT until the LED changes colour again The pedals are programmed as Y-AXIS ( Accelerator & Brake )

HOW TO PROGRAM THE L-PADDLE & R-PADDLE AS ACCELERATOR & BRAKE

Press & hold “SHARE” + “OPTIONS” for 3 seconds until the LED changes colour
Press D-PAD RIGHT until the LED changes colour again L-Paddle and R-Paddle will be programmed as Y-AXIS ( Accelerator & Brake )

HOW TO CLEAR THE PROGRAMMATION OF L/R-WING OR PEDALS

Press & hold “SHARE” + “OPTIONS” for 3 sec until the LED changes colour
Press the L/R-Paddle or pedal , the LED will start to blink
Press the L/R-Paddle or pedal until the LED turn off

WHEEL SENSITIVITY ADJUSTMENT (3 LEVELS)

Wheel sensitivity is adjustable from the sensibility selector (LO MID HI)

PLATFORMS

PS3® GUIDE

Connect the pedals to the wheel and then connect the wheel to the PS3®console
Press the HOME button to enter the XBM window
Press and hold the MODE button to enter the Menu setup window

PS4® GUIDE

Connect the pedals to the wheel then connect the wheel to the PS4® console
Connect the original PS4® controller to the wheel with the USB cable provided (or a cable with data function)
After the connection has been established, the red LED on the wheel will turn on then press the HOME button on the wheel to select the User
To enter in the XBM window press the HOME button

XBOX ONE® GUIDE

Connect the pedals to the wheel then connect the wheel to the XBOX ONE® console
Connect the original XBOX ONE® controller to the wheel with the USB cable (or a cable with data function)
After the connection has been established, the red LED on the wheel will turn on
To enter in the main menu press the HOME button

SWITCH® GUIDE

Connect the pedals to the wheel then connect the wheel to the SWITCH® console
After the connection has been established, the red LED on the wheel will turn on
Follow the route to activate the wheel : System Settings -> Controllers and sensors -> Pro Controller Wired Communication -> Set to “ON”
To screenshot : Press“SHARE” and “OPTIONS”

PC GUIDE

DRIVER

The Driver is required on PC

Follow the link on www.nitho.com to download the driver :
https://nitho.com/pages/downloads

X-INPUT

The wheel is set on X-INPUT as default.
Press & hold HOME for 3 seconds to switch to D-input. the LED will switch off and switch on again after 0.5 seconds

TEST

Enter Test interface to test buttons and axis functions
Enter Calibration interface to calibrate the axis

DRIVER UNINSTALL

Start→ Control Panel→ programs/Function
Find the driver you want to remove in the Interface ”current installed programs”. Click “Remove” and follow the instructions to get the successful uninstall.

TROUBLE SHOOTING

If the connection LED is not on, please re-connect to the controller again and retry
If the wheel do not give any response, turn off and on again the console and procees the wheel setup once again