NiTHO MLT-DP20-K Drive Pro Racing Wheel User Guide

June 5, 2024
NiTHO

NiTHO MLT-DP20-K Drive Pro Racing Wheel

NiTHO MLT-DP20-K Drive Pro Racing Wheel-PROD

SPECIFICATIONS

THANK YOU FOR CHOOSING THE NITHO DRIVE PRO WHEEL. WE WOULD LIKE TO INTRODUCE ITS SPECIFICATIONS :

  • Compatible with Windows® 10, PS3®, PS4®, XBOX ONE®, SWITCH® and supports US, EU, Japan versions consoles
  • Home button to enter into Settings on PS3®, PS4®, XBOX ONE® consoles
  • It`s provided with 2 axes a D-pad and 12 action buttons
  • 6 programmable buttons: Left Wing,Right Wing , Accelerator Pedal , Brake Pedal , L3,R3
  • 4 suction cups to keep the wheel stable
  • 180 degrees wheel rotation, lock to lock
  • Three selectable sensibility levels
  • Spring-loaded pedals
  • X-INPUT & D-INPUT modes selector (X-INPUT mode as default)
  • Table clamps

BUTTON LAYOUT

NiTHO MLT-DP20-K Drive Pro Racing Wheel-
FIG1

FUNCTION KEYS

NiTHO MLT-DP20-K Drive Pro Racing Wheel-
FIG2

FUNCTION INTRODUCTION

PROGRAM FUNCTIONS

INTRODUCTION TO THE SETUP

You can assign to the (PROGRAMMABLE) buttons the functions of the (DEFAULT) buttons

  1. The DEFAULT buttons are :
    □/X, ○/B, △/Y, X/A, L1/LB, L2/LT, R1/RB, R2/RT

  2. The PROGRAMMABLE buttons are :
    L-Paddle, R-Paddle , Accelerator pedal, Brake pedal, L3/SL, R3/SR, Gear-shift

HOW TO CUSTOMIZE YOUR SETUP

  1. Press & hold “SHARE” + “OPTIONS” for 3 seconds until the LED change colour
  2. Press the PROGRAMMABLE button until the LED starts blinking
  3. Press the DEFAULT button until the LED stops blinking

HOW TO RESET TO DEFAULT A PROGRAMMATION

  1. Press & hold “SHARE” + “OPTIONS” for 3 seconds until the LED changes colour
  2. Press the programmed button until the LED starts blinking
  3. Press the programmed button until the LED stops blinking

HOW TO RESET TO DEFAULT ALL THE PROGRAMMATION

  1. Press & hold “SHARE” + “OPTIONS” for 3 seconds until the LED changes colour
  2. Press & hold “OPTIONS” for 4 seconds until the LED changes colour again All the programmed buttons are cleared

Note:
All settings will NOT be cleared when the wheel is powered off

HOW TO PROGRAM THE L-PADDLE & R-PADDLE AS ACCELERATOR & BRAKE

  1. Press & hold “SHARE” + “OPTIONS” for 3 seconds until the LED changes colour
  2. Press D-PAD RIGHT until the LED changes colour again L-Paddle and R-Paddle will be programmed as Y-AXIS ( Accelerator & Brake )

HOW TO CLEAR THE PROGRAMMATION OF L/R-WING OR PEDALS

  1. Press & hold “SHARE” + “OPTIONS” for 3 sec until the LED changes colour
  2. Press the L/R-Paddle or pedal , the LED will start to blink
  3. Press the L/R-Paddle or pedal until the LED turn off

Press D-PAD UP to confirm and quit

PLATFORMS

PS3® GUIDE

  1. Connect the wheel to PS3® console and connect the pedal to the wheel
  2. During PS3® gameplay, press the HOME button once to enter the XBM window
  3. Press & hold the HOME button to enter in the MENU setup window

PS4® GUIDE

  1. Connect the wheel to PS4® console then connect the pedal to the wheel
  2. Connect the wheel to original PS4® controller with the original USB cable (or a cable with data function)
  3. After the connection has been established, the RED LED on the wheel will turn on then press the HOME button on the wheel to start the game
  4. During PS4® gameplay, press the HOME button once to enter the XBM window

XBOX ONE® GUIDE

  1. Connect the wheel to XBOX ONE® console then connect the pedal to the wheel
  2. Connect the wheel to original XBOX ONE® controller with the original USB cable (or a cable with data function)
  3. After the connection has been established, the RED LED on wheel will be on
  4. During XBOX ONE® gameplay, press the HOME button to enter the main menu

SWITCH® GUIDE

  1. Connect the wheel to SWITCH® console then connect the pedal to the wheel.
  2. After the connection has been established, the RED LED on the wheel will turn on
  3. Follow the route to activate the wheel : System Settings -> Controllers and sensors -> Pro Controller Wired Communication -> Set to “ON”

To screenshot :
Press“SELECT/SHARE/9/VIEW/-” and “START/OPTIONS/10/MENU/+”

NiTHO MLT-DP20-K Drive Pro Racing Wheel-FIG4

PC GUIDE

X-INPUT

  1. The wheel is set on X-INPUT as default
  2. Press & hold HOME for 3seconds to switch to D-input then the LED will switch off and switch on again after 0.5seconds

TEST

  1. Enter the Test interface to check buttons and axis functions
  2. Enter the Calibration interface to calibrate the axis

DRIVER UNINSTALL

  1. Start→ Control Panel→ programs/Function
  2. Find the driver you want to remove in the Interface ”current installed programs” Click “Remove” and follow the instructions to get the successful uninstall

TROUBLESHOOTING

  1. If the connection LED is not on, please re-connect to the controller again and retry.
  2. If the wheel does not give any response, turn off and on again the console and procees the wheel setup once again

PRECAUTIONS

  1. Read carefully the user manual before using the wheel
  2. Do not disassemble or modify
  3. Avoid storing in a smoky, humid or dusty place

SERVICE & SUPPORT
For any question or support request, contact us on support@nitho.com or visit our website at www.nitho.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals