NITHO MLT-ADOB Wireless Controller User Guide
- May 15, 2024
- NiTHO
Table of Contents
NITHO MLT-ADOB Wireless Controller
SPECIFICATIONS
- Model: MLT-ADOB
- Connection Range: Up to 10 meters
- Main Features:
- Reactive Dpad & Mini sticks
- Micro-USB Charging port
- Dual vibration motor
- Stereo headset 3.5mm mini-Jack port Speaker
- Ergonomic grip
PRODUCT USAGE INSTRUCTIONS
FIRST TIME SETUP
Before using the adonis controller, ensure it is fully charged by
connecting the supplied USB cable to the controller and a USB port. The white
LED light will indicate the charging status.
X-INPUT & D-INPUT SETUP ON PC
If connecting wirelessly to a PC, adonis is programmed as D-Input. When
wired, it functions as X-Input. To switch between modes, press N + Share for 5
seconds.
SIX AXIS FUNCTION
The controller’s axes calibration is automatic. X-axis: left>right,
right>left; Y-axis: front>back, back>front; Z-axis: up>down, down>up.
WIRELESS CONNECTION SETUP
- Turn on the console.
- Connect adonis to the console using the USB data cable.
- Press and hold the N button until the LED bar lights up to establish connection.
- For subsequent connections, press the N button for automatic log-in.
TROUBLESHOOTING
If unable to connect, press the Reset button in the rear of the controller.
WIRED CONNECTION SETUP
Connect the included USB data cable between adonis and the console/PC for
wired connection.
PRECAUTIONS
Avoid misuse of the controller. Store in a dry area away from sunlight.
Elevated temperatures can damage it. Do not disassemble. Take breaks if
discomfort arises. Not for children under 3 years old.
TEST MODE ON PC
To access test mode on PC, connect adonis via Micro-B data cable and
navigate to Control Panel Device and Printer to view Wireless Controller
Properties.
FAQ
-
Q: How do I change adonis controller modes?
A: Press N + Share for 5 seconds to toggle between X-Input and D-Input modes. -
Q: What should I do if I can’t connect adonis to my console or PC?
A: Press the Reset button located in the small hole at the rear of the controller to troubleshoot connection issues.
SPECIFICATIONS
THANK YOU FOR BUYING NITHO adonis.
WE WOULD LIKE TO INTRODUCE ITS SPECIFICATIONS:
- Full compatibility with PS3®, PS4®, PC, iOS® and Android®.
- It’s equipped with the latest motion sensing technology.
- The built-in three-axis gyroscope and three-axis accelerator can detect an omnidirectional dynamic information including Roll, Pitch and Yaw.
- It has a dual-point capacitive sensing touchpad.
- 3.5mm headset jack enables audio chat on PS4® console.
- High performance analog triggers.
- Customization kit with anti-sweat horns, thumb grips, trigger grips and stickers for touch pad and LED bar.
MAIN FEATURES
BUTTONS LIST
N (Home), Share, Option, ^, ?, <, >, ×, ○, 口, △, L1, L2, L3, R1, R2, R3, VRL,
VRR, RESET.
COMPATIBILITY
Supports any version of PS4® and PS3® consoles, Android® (above v. 6.0), iOS®
(above v. 13.3) and PC (Windows® 10/11) D-Input protocol if wireless and
D-Input + X-Input protocols if wired.
CONNECTION
adonis keeps connected up to 10 metres away from the main device.
FIRST STEP BEFORE USING ADONIS
Before connecting adonis controller for the first time, charge the battery to
full capacity. To recharge the battery, plug the supplied USB cable onto the
controller and a USB port. The white LED light at the front of the controller
lights up in “breathing mode” during charging and turns off when charging is
complete.
X-INPUT & D-INPUT SETUP ON PC
When adonis is wirelessly connected to a PC, it is programmed as D-Input. When
the controller is wired, it is programmed as X-Input. It is possible to change
the programmation to D-Input pressing “N” + “Share” for 5 seconds. It is
possible to use the same procedure to go back to X-Input.
SIX AXIS FUNCTION
- X- AXIS acceleration directions: left>right, right>left
- Y- AXIS acceleration directions: front>back, back>front
- Z- AXIS acceleration directions: up>down, down>up
The calibration is automatic.
WIRELESS CONNECTION SETUP
CONSOLE
- Turn on the console.
- Plug the USB data cable into adonis and console.
- Press and hold the “N” button, the LED bar lights up, then your controller is connected.
- For future connections, you can press the “N” button on the controller and it will automatically log into the console.
Note
To connect adonis to the console, you need a USB data cable to Micro-B.
After the initial pairing, the data cable is no longer required.
PC, IOS® & ANDROID®
- Switch on the device/PC and your Bluetooth® feature.
- Activate the Bluetooth® search mode of your device/PC by clicking on “Add New Bluetooth® Device”.
- Press and hold the “N” + “SHARE” buttons for a few seconds until the LED front bar starts flashing quickly.
- Choose “Wireless controller” and tap “Pair” on your device/PC to connect adonis.
- The front LED bar light will stop flashing and your controller will be connected.
TROUBLESHOOTING
If you are unable to connect the adonis controller to the console or
device/PC, press the Reset button located in the small hole in the rear of the
controller.
WIRED CONNECTION SETUP
CONSOLE & PC
Connect the included USB data cable to adonis controller and the console / PC.
SLEEP MODE
adonis switches to Sleep mode if it fails to connect with PS4®, PS3®, PC, iOS®
and Android® or if it doesn’t receive any input for 5 minutes. adonis doesn’t
go into Sleep mode if wired connected.
PRECAUTIONS
Do not use adonis controllers for purposes other than those outlined in this
Quick Start Guide. Store and use the controller in a dry area, protected from
moisture and direct sunlight. Elevated temperatures can damage the controller.
Do not disassemble the controller. Stop playing with the controller, if you
are uncomfortable or
tired. Please, consult a doctor if symptoms persist. Take some regular time
out of play. This controller is not intended for children younger than 3
years. To protect the environment, adonis controller cannot be disposed with
household waste. Please return this controller to a designated collection
point for recycling.
TEST MODE ON PC
Follow the below instructions for the testing keys in Windows® 10. Connect adonis to your computer through the Micro-B data cable, then follow the route: PC ? Start ? Control Panel? Device and Printer.
Wireless controller Model; Wireless controller
Category: Game controller
Then, double click on “Wireless Controller”? Properties.
BUTTONS CORRESPONDENCE
BUTTONS LAYOUT CORRESPONDENCE PS4®-PS3®-PC
| PS4®/ PS3® | PC |
|---|---|
| □ | 1 |
| × | 2 |
| O | 3 |
| △ | 4 |
| L1 | 5 |
| R1 | 6 |
| L2 | 7 |
| R2 | 8 |
| SHARE | 9 |
| OPTION | 10 |
| L3 | 11 |
| R3 | 12 |
| PS | 13 |
| T-PAD | 14 |
Website: www.nitho.com
SERVICE & SUPPORT
If you have any questions or require support, contact NITHO Team at
support@nitho.com or visit our website
www.nitho.com
NiTHO GmbH – Victoriastrasse 3b – 86150 Augsburg – Germany
Email: SUPPORT@NITHO.COM
Website: WWW.NITHO.COM
Instagram : NITHOGAMES
Facebook: NITHOGAMES