AIPHONE IXW-HWCBP Hand Wave Call Button and Surface Mount Box Instructions
- June 6, 2024
- AIPHONE
Table of Contents
AIPHONE IXW-HWCBP Hand Wave Call Button and Surface Mount Box
Instructions
IXW-HWCBP includes a touchless switch attached to a mounting plate, a PS-POE, and the SBX-2G/A surface mount box. This device can be connected to any IX Series door station with a trigger input and a PoE passthrough. It will place calls to the programmed station without having to touch the call button. The touchless switch is powered by the PS-POE. The switch’s contact output will trigger a contact input on the door station. The contact input will need to be programmed and assigned to a calling group. This instruction manual will show how to connect the IXW-HWCBP to the door station and program the door station for contact input calling.
Wiring
A PoE+ switch is required when using the IXW-HWCBP. Connect a network cable from the PoE+ switch to LAN 1 of the IX Series door station. LAN 2 connects to the included PS-POE. Connect the power output of the PS-POE to the red (+VDC) and black (Gnd) wires of the touchless switch. Connect the green (N/O) and yellow (Common) wires of the touchless switch to contact input 1 on the IX Series door station (brown/blue wires on CN2).
Package Contents
- Qty 1 Panel with touchless switch
- Qty 1 SBX-2G/A
- Qty 1 PS-POE
- Qty 4 speed nuts for panel mounting
- Qty 4 screws for panel mounting
- Qty 1 three-foot patch cable
Installation
-
Secure SBX-2G/A to wall
-
Connect included patch cable, power wires, and a ground wire to PS-POE and place unit inside the SBX-2G/A
-
Connect included patch cable to LAN 2 of IX series door station
-
Connect touchless switch to input of IX series door station and PS-POE
– Green (N.O.) to Brown (CN2 of IX-DV)
– Yellow (Common) to Blue (CN2 of IX-DV)
– White (N.C.) not used
– Red (+VDC) to + of PS-POE
– Black (GND) to – of PS-POE -
Secure switch panel to SBX-2G/A
Specifications
Dimensions: 4-¹³/ ” H x 4-/ ” W x 4″ D
Programming
Enabling Door Station Option Input
The first step is to enable the contact input on the IX Series door station will connect to the IXW-HWCBP. Open IX Support Tool and select the system to edit. Door stations can have up to 6 contact inputs. These instructions will show using contact input 1. In the upper left corner of the screen click Station View to switch from Table View to Station View.
Door Station Option Input Call
The next step is to assign a call group to the trigger input. The call group for the trigger input, will be the same group assigned to the call button.
Uploading Settings to Stations
The final step is to upload all updated settings from Support Tool to the door station.
For more details about the features and information above, please contact Technical Support. Aiphone Corporation | www.aiphone.com | tech@aiphone.com | 800-692-0200
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>