AIPHONE IX-DVF-HW IX Series Video Door station with Hand Wave Call Button and Surface Mount Box Instructions

AIPHONE IX-DVF-HW IX Series Video Door station with Hand Wave Call Button

and Surface Mount Box

INSTRUCTIONS

IX-DVF-HW includes a video door station with a built-in touchless switch, a PS-POE, and an SBX-IDVFRA surface mount box. The IX-DVF-HW operates like a standard IX-DVF with the added ability to place a call to the programmed station without having to touch the call button. The touchless switch utilizes the fi rst contact input on the door station. The contact input will need to be programmed and assigned to the same calling group as the call button. Program the IX-DVF-HW as an IX-DVF. Refer to the IX Series Quick Start Programming Guide for details. This manual will show how to install and program the door station for contact input call.

Wiring
A PoE+ switch is required when using the IX-DVF-HW. Connect a network cable from the PoE+ switch to LAN 1 of the IX Series door station. LAN 2 connects to the incuded PS-POE. Connect the power output of the PS-POE to the red (+VDC) and black (GND) wires of the touchless switch. The green (N/O) and yellow (Common) wires of the touchless switch will already be connected to the brown and blue wires of the CN2 connector. The white (N/C) wire is not used.

Package Contents

• Qty 1 Video door station with touchless sensor Qty 1 PS-POE
• Qty 1 SBX-IDVFRA surface mount box
• Qty 4 speed nuts for panel mounting
• Qty 4 screws for panel mounting
• Qty 1 One foot patch cable

Installation

• Secure the SBX-IDVFRA to the wall
•  Connect the supplied patch cable, power wires, and a ground wire to PS-POE and place the unit inside the SBX-IDVFRA at the bottom so that it does not interfere with securing the station
•  Attach speed nuts to tabs on the SBX-IDVFRA, then connect the ground wire from PS-POE to one of the four screws used to secure IX-DVF-HW to the SBX-IDVFRA
•  Plug in CN2 connector and connect the network cable to the station
•  Secure station to SBX-IDVFRA

Specifications

Dimensions:
11-¹¹⁄” H x 7″ W x 3-⁵⁄ (top); 2-⁵⁄” (bottom) D
Aiphone Corporation
www.aiphone.com
tech@aiphone.com
800-692-0200

WARNING
If a PoE passthrough is not available, connect the PS-POE directly to the PoE switch

Programming

Enabling Door Station Option Input

The first step is to enable contact input 1 on the IX-DVF-HW, as this is connected to the touchless switch. Open-IX Support Tool and select the system to edit. In the upper left corner of the screen click Station View to switch from Table View to Station View.

Option Input
Expand Option Input / Relay Output Settings and click Option Input.

Select a Station
Use the drop-down menu or click Next to choose the station number of the door station to be confi guard. Click Select.

Option Input / Name
Select Option Input 1 using the drop-down menu and assign a Name.

Choose a Function
Select Call for this option input.

Contact Settings
Select Make for the Type and 0 (Immediate) for the Detection Time Range

**Door Station Option Input Call

**

The next step is to assign a call group to the trigger input. The call group for the trigger input will be the same group assigned to the call button.

Call Origination
Expand Call Settings and click Call Origination.

Select a Station
Use the drop-down menu to choose the station number of the door station to be confi gured and click Select.

Select an Input
Use the drop-down menu and select Option Input 1.

Select a Destination
Click Open under Call Destination and select group 01. Use the Priority drop-down menu to select the calling priority.

Uploading Settings to Stations

The final step is to upload all updated settings from the Support Tool to the door station.

Upload Settings to Station
From the menu bar, select File then Upload Settings To Station

Select Stations
Click Select to check all stations in the system or select just the door station that was changed.

Upload Settings
Click Settings to begin the upload process.

Confirm Status
Using the Status column, confirm that each station has successfully been updated with the new setting file.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>