SANPAO TJ800 Mini Android Smart TV User Manual

SANPAO

SANPAO TJ800 Mini Android Smart TV

SAFETY INSTRUCTIONS FOR TJ800 MINI SMART TV

1. Please DO read the safety instructions carefully.
2. Please DO keep this manual property for future reference.
3. Please put this product on a stable and clean table before usage.
4. All the openings and slots on the product case are for ventilation and heat dissipation to avoild component damage due to over- heating, so do NOT cover or block these parts.
5. Do NOT place the power supply in places where it is easy to be trod on,do NOT put any item on the power lines.
6. Do NOT pour any kind of liquid into this product, otherwise it may suffer damage or circuitry burnout.
7. Do NOT place this product in the environment which temperature is above 65 ℃ or below 0℃, otherwise it may be damaged.
8. Please do NOT put this product in the environment with high humidity or dust.
9. Please contact professional personnel for further treatment if the following conditions happen:
   • Power supply source damage;
   • Liquid infiltration into product case;
   • No reaction or black screen after power-on.

BRIEF INTRODUCTION TO TJ800 TV

TV FRONT VIEW

TV REAR VIEW

1. Power supply switch
2. System switch
3. USB—1
4. USB—2
5. HDMI signal input
6. Speaker
7. TF card slot
8. DC55X21 power socket

TV REMOTE CONTROL

POWER SUPPLY

POWER SUPPLY DESCRIPTION
Power supply requirement: A 9V/1.5A power supply should be applied to this product, the plug specification should be DC 5.5mm X 2.1mm.

1. Corresponding power adapters are enclosed based on different countries or regions end users are located in.
2. Please DO note the power supply requirement if you want to buy the adapter by yourself or use a mobile power supply, this product may be malfunctional or damaged if the voltage or current output by your power supply is above or below the requirement.

COMMON ISSUES

START-UP

1. Standy: pull the power switch up to enter the standy mode.
2. TV turn-on: pull up the switches of power switch and system switch, Outer HDMI device after the snowflake animation is over and the Android system starts up, the product is ready for use.

OUTER DEVICE

1. HDMI video device connection: when the product is in the standby mode, insert the HDMI wire of outer device into the HDMI socket in the back of the product, boot up the connected device and pull down the system switch.
2. If the screen keeps showing the standby image, please pull the system switch again or reboot the TV and outer device.

Note: A few outer devices may not connect with this product normally due to the compatibility issue between outer HDMI and USB devices, please be noted that this is not the product’s fault or quality issue.

OPERATING SYSTEM INTRODUCTION

1. Turn on TV to enter the general Android system interface
2. Device setting

NETWORK CONNECTION

WIFI setting

WIRELESS KEYBOARD, MOUSE, GAME CONTROLLER AND OTHER EXTENSION PARTS

1. Keyboard and mouse: this TV supports most USB wired or wireless Bluetooth keyboards and mouses, just insert the connector into the TV’s USB socket.
2. Game controller: this TV supports most USB wired or Bluetooth game controllers(game controller needs to have built-in Bluetooth receiver), for game controller’s usage and settings, please refer to its relevant user manual and the setting descriptions in different APPs.
3. Mobile hard disk, U-disk, TF card: this product supports most mobile hard disks, U-disks and TF cards, as for TF card, it supports 128G maximum. Note: Some old USB devices may not work normally due to the compatibility issue.

WARRANTY AND AFTER-SALES COMMITMENT

TJ800 TV WARRANTY COMMITMENT
TJ800 Mini TV and its enclosed accessories provide one-year warranty as of the date of sale.

SCOPE OF REPAIR:
No matter you purchase TJ800 TV through any sales channel, it provides warranty service. You can contact retailer or customer service personnel via logging on to the official website of Douzi Techonology Co., Ltd(douzitv.net).
THE WARRANTY EXCLUDES THE FOLLOWING CONDITIONS:

• Damages caused by natural disasters such as fire, earthquake, typhoon and so on;
• War, being used as an attack weapon, delibertately abuse or damage
• The tamper-proof label on the back of the product case being torn off

REPAIR APPROACHES:

• Repair or replacement is implemented based on specific faulty conditions, the parts which can be repaired or replaced include, but not limited to, screen, motherboard, speaker and so on.
• All the replaced parts, accessories or device should be brand-new.
• The replaced parts or accessories enjoy a warranty equal to the remaining duration of the one-year warranty or 90 days after the replacement, the longer one of the above-mentioned two periods prevails.
• Brand-new accessories should be used to replace if they have problems.

TJ800 TV AFTER-SALES COMMITMENT
Users can enjoy the lifetime after-sales service after the one-year warranty expires.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>