EUROPOLE POL62410 RTIGHT Turn Round Matt White Adjustable IP20 Instruction Manual
- June 6, 2024
- EUROPOLE
Table of Contents
EUROPOLE POL62410 RTIGHT Turn Round Matt White Adjustable IP20
WARNING: The installation must be carried out by qualified persons in
accordance with the standards and regulations in force. It is recalled that
the decision to install the products in an environment compatible and in
compliance with the standards and good practices is the full responsibility of
the buyer and the installer. Read and follow the instructions before
installing, powering on or using the products. We do not accept any liability
resulting from improper implementation or installation of the products.
The devices must not be modified, even partially, otherwise the warranty will
not apply. IMPORTANT: Always turn off the power to the network before each
installation or maintenance operation.
TECHNICAL SPECIFICATIONS
For LED or halogen lamp, not provided
- Electrical input characteristics: 12 VDC or 230 VAC, 50-60 Hz
- Operating temperatures: -20°/+40°
- Installations: on flush-mounted ceiling, delivered with pre-connected holder and 3-pole quick-connect base unit Materials: aluminium
INSTALLATION
- Cut a hole in the ceiling to the corresponding diameter (see information on the product packaging)
- Connect the 230V electricity supply to the quick hook, then close the cover and make sure that the tension stop is performed correctly.
- Pull back the springs and install the spotlight in the ceiling.
- Install the lamp in the socket and ensure that the power cable is not in direct contact with the lamp.
- Cut a hole in the ceiling to the corresponding diameter (see information on the product packaging)
- Install the lamp in the socket and ensure that the power cable is not in direct contact with the lamp.
- Connect the 230V electricity supply to the quick hook, then close the cover and make sure that the tension stop is performed correctly.
- Pull back the springs and install the spotlight in the ceiling.
R TIGHT DESIGN – 62420-62423-62430-62433
R TIGHT DECO – 62810-62813-62815
WARNING: The installation must be carried out by qualified persons in
accordance with the standards and regulations in force. It is recalled that
the decision to install the products in an environment compatible and in
compliance with the standards and good practices is the full responsibility of
the buyer and the installer. Read and follow the instructions before
installing, powering on or using the products. We do not accept any liability
resulting from improper implementation or installation of the products.
The devices must not be modified, even partially, otherwise the warranty will
not apply. IMPORTANT: Always turn off the power to the network before each
installation or maintenance operation.
TECHNICAL SPECIFICATIONS
- IP20 (adjustable version)
- IP44 (fixed version) with polycarbonate diffuser
COMPATIBLE SPOTLIGHTS
R TIGHT DESIGN – R TIGHT DECO – DECO – DECO ASYM – DECO+ – DECO+ ASYM – ALU 16 – ALU SOFT+ – BE BEST IP65 BBC – BE BEST DESIGN IP65 BBC – FLAT DESIGN
INSTALLATION
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>