AJAX 9NA MotionProtect Plus Pet Immune Motion Detector User Guide
- June 6, 2024
- ajax
Table of Contents
AJAX 9NA MotionProtect Plus Pet Immune Motion Detector
Ajax MotionProtect Plus
Quick Start Guide
Before using the device, we strongly recommend reviewing the User Manual on the website.
Product name: Wireless motion detector with microwave sensor MotionProtect Plus detects motion at a distance of up to 39 ft, filters thermal interference and features pet immunity.
Frequency range| 905 MHz~926.5MHzMHz FHSS
(complies with part 15 of the FCC rules)
---|---
Maximum RF output power| 7.20 mW
Radio signal range| Up to 3,900 ft (line-of-sight)
Motion detector viewing
angles (H/V)
| 88.5° / 80°
Power supply| CR123A battery, 3 V
Operation from battery| Up to 5 years
Operating temperature range| From 14° to 104°F
Operating humidity| Up to 75%
Dimensions| 4.33 х 2.36 x 1.97 ″
Weight| 3.39 oz
Complete Set: 1. CombiProtect; 2. SmartBracket mounting panel; 3. CR123A (pre- installed); 4. Installation kit; 5. Quick Start Guide
FCC Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
To maintain compliance with FCC’s RF exposure guidelines, this equipment
should be installed and operated with a minimum distance of 20 cm between the
radiator your body: Use only the supplied antenna. This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Regulatory Compliance
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
To maintain compliance with ISED’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator your body: Use only the supplied antenna.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Warranty: The warranty for Ajax devices is valid for two years after the purchase date and does not apply to the supplied battery. If the device does not work correctly, you should first contact the support service—in half of the cases, technical issues can be solved remotely!
The full text of the warranty is available on the website:
ajax.systems/warranty
User Agreement: ajax.systems/end-user-agreement
Technical support: [email protected]
Manufacturer: “AJAX SYSTEMS MANUFACTURING” LIMITED LIABILITY COMPANY.
Address: Sklyarenka, 5, Kyiv, 04073, Ukraine.
www.ajax.systems