KUNA KNA-CF-WH-01 Camera Floodlight Instruction Manual
- June 6, 2024
- KUNA
Table of Contents
KNA-CF-WH-01
Camera Floodlight
INSTRUCTION MANUAL
Learn more need support? Visit help.getkuna.com, email us at [email protected], or call 1-844-905-1914, Mon-Fri 8:00 AM-5:30 PM Pacific Time
PACKAGE CONTENTS
PART
| DESCRIPTION|
QTY
---|---|---
A| Lamp head| 2
B| Power supply compartment| 1
C| Mounting plate| 1
D| Locking switch| 1
E| Control compartment| 1
F| Camera| 1
G| PIR compartment| 1
PART
| DESCRIPTION| QTY
---|---|---
H| Mounting bracket|
J| M5 screw|
K| M4 screw|
L| Mounting bracket screw|
M| Ground connection screw|
N| Connector|
SAFETY INFORMATION
WARNING
- Risk of fire or electric shock. 100V-277V light installation requires knowledge of luminaires’ electrical systems. If not qualified, do not attempt to install. Contact a qualified electrician.
- Disconnect power at fuse or circuit breaker before installing or servicing.
- No user-serviceable parts inside. To avoid electrical shock, do not disassemble the product.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- Use only on 100V-277V AC, 50-60 Hz circuits, and with a maximum 75W light bulb.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Please read and understand this entire manual before attempting to assemble,
install, or operate this light fixture.
Your government may regulate the use of security cameras and other recording
devices. It is the purchaser’s sole responsibility to ensure compliance with
all applicable laws and to provide any legally required notices. Check local
laws regulating the use of any recording devices and cameras prior to
installation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced technician for help.
PREPARATION
Before beginning the assembly of the product, make sure all parts are present.
Compare parts with package contents list. If any part is missing or damaged,
do not attempt to assemble the product.
INSTALLATION
Determine desired mounting location on a wall or an eave.
Unlock the locking switch (D).
Remove mounting plate (C) from the fixture by turning the plate clockwise.
Remove the existing light fixture and install the mounting bracket (H) with the stamped word “FRONT” facing away from the junction box. Use the mounting bracket screw (L) to fix the mounting bracket. Firmly pull on the mounting bracket to verify it is securely mounted to the junction box.
Use connector (N) to complete wiring, and use ground connection screw (M) to connect ground wire with a mounting bracket (H).
Use M5 screw (J) to link the mounting plate (C) with a mounting bracket (H), the screw should not be fixed too tight.
Adjust the mounting plate (C) to make sure the air bubble in the air level is
in the middle. Link the M4 screw (K) on the mounting bracket (H). Tighten M4
screw (K) and M5 screw (J).
Align the bottom edge of the power supply compartment (B) with the bottom edge
of the mounting plate (C). Insert the conducting post on the power supply
compartment (B) into the holes on the mounting plate (C). Tilt and lock the
locking switch (D).
CAUTION: Read the how-to section before turning the power back on at the
circuit breaker or fuse.
HOW TO
ADJUST LAMPS
If needed, gently grasp the lamp heads (A) and tilt them up or down or side
to adjust the light coverage area. The control compartment (E) is also
available for limited horizontal rotation.
ADJUST DIRECTION OF CAMERA
Gently press the camera ball and change the direction of the lens to get
the best view.
AIM MOTION SENSOR
Rotate the PIR compartment to direct the lens to the desired target area.
WiFi
Setup
After installation, on your iOS or Android smartphone, please visit
qetkuna.com/app to download and install our free
Kuna App. Follow in-app instructions to set up your Kuna Security Light.
WARRANTY
This product is guaranteed to be free of factory defective parts and workmanship for a period of 1 year from the date of purchase. A purchase receipt is required for all warranty claims. This guarantee does not include repair service, adjustment, and calibration due to misuse, abuse, or negligence. Unauthorized service or modification of the product will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges. This warranty is not extended to other equipment and components that a customer uses in conjunction with this product.
Get powered. Get the app.
Welcome to the next generation in smart security
Your Kuna Floodlight installs in minutes using existing wiring. It’s powered by the Kuna app for wireless intelligence.
Activate your light now! Visit netkuna.com/app to download the Kuna app on your Apple or Android mobile device.
Create your account and connect your light.
FCC STATEMENT
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC STATEMENT
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept
any interference, including interference that may cause undesired operation of
the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and your body.
Learn more or need support?
Visit help.getkuna.com, email us at
[email protected], or call
1-844-905-1914, Mon-Fri 8:00 AM-5:30 PM
Pacific Time