Yokogawa Electric F9092LD ISA100 Wireless Module User Manual
- June 6, 2024
- Yokogawa Electric
Table of Contents
User Manual
Model: Kind of Product
F9092LD: ISA100 Wireless Module
Since this module is not sold to general end-users directly, there is no user
manual of the module.
For the details about this module, please refer to the specification sheet of
the module.
This module should be installed in the host device according to the interface
specification (installation procedure).
The following information must be indicated on the host device of this module;
[for FCC]
Contains Transmitter Module FCC ID: SGJ-WFC019 or Contains FCC ID: SGJ-WFC019
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
*If it is difficult to describe this statement on the host device due to the size, please describe it in the user’s manual and also either describe on the device packaging or on a removable label attached to the device.
[for ISED(IC)]
Contains IC: 8999A-WIC017
The following statements must be described on the user manual of the host device of this module; [for FCC]
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the userʼs authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines. This equipment should be installed and operated keeping the
radiator at least 20 cm or more away from the personʼs body.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canadaʼs licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from the personʼs body.
[List of applicable FCC rules] This device complies with part 15 of the FCC Rules. Part 15 Subpart C
[Additional testing, Part 15 Subpart B disclaimer] The modular transmitter is
only FCC authorized for the specific rule parts (i.e., FCC transmitter rules)
listed on the grant, and the host product manufacturer is responsible for
compliance with any other FCC rules that apply to the host not covered by the
modular transmitter grant of certification. ”
The final host product still requires Part 15 Subpart B compliance testing
with the modular transmitter installed.
[Information on test modes and additional testing requirements] This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Model: F9092LD
Doc. No.:
WFC019-A06
Date: 29 January 2021
Rev.0:
Yokogawa Electric Corporation
Documents / Resources
|
Yokogawa Electric F9092LD ISA100 Wireless
Module
[pdf] User Manual
WFC019, SGJ-WFC019, SGJWFC019, F9092LD ISA100 Wireless Module, ISA100 Wireless
Module, Wireless Module, Module
---|---