global sources K9 Pro Intelligent Sensor Soap Dispenser Instruction Manual
- June 6, 2024
- global sources
Table of Contents
Intelligent Sensor Soap Dispenser
K9 Pro
Appearance
Specification
- Accuracy: ±0.2℃ (34~45℃, put it in the operating environment for 30 minutes before use)
- Alarm type: flashing + bleeping “DIDIDI”
- Measuring distance: 5cm~10cm
- LED display: Number
- Interface: Type-C
- Bottle Capacity: 1000mL
- Mounting Type: Wall-hanging, Tripod-fixed
- Working Temperature: 10℃~40℃ (15℃~35℃ Recommended)
- Measuring range: 0~50℃
- Response time: 500ms
- Standby time: 5s for non-working, dynamic loop with white light
- Power Supply: DC 5V 1500MA(or 4 AA batteries)
- Dimension: 119133280mm
- Liquid type: hand sanitizer or liquid disinfectant
Conditions
- Standby: the white dot on the bottom of the right corner flashing by turns. (Fig. 1)
- Normal temperature: displays current temperature and green light flashes once on the display. (Fig. 2)
- Abnormal temperature: displays current temperature and red light flashes on the display. (Fig. 3)
- Out of measuring range(Note: do not spray hand sanitizer):
“Lo”: Ultra-low temperature alarm. (Fig. 4);
“HI”: Ultra-high temperature alarm. (Fig. 5)
|
---|---
Instructions
- Temperature measuring and handwashing: Put your hand on the bottom until you hear a “DI” sound, then the LED screen will display the temperature and hand sanitizer squeezed out. (Fig. 6)
- The function of a button:
(1) Button ①: Function setting(Fig. 7)
| (2)Button ②: Specific function settings(Fig. 8)
---|---
3. Function setting
Press the button ① once to set the temperature unit
Press the button ② to switch between Celsius and Fahrenheit C: Celsius F:
Fahrenheit (Fig. 9, Fig. 10)
|
---|---
Press the button ① twice to set the working mode
Press the button ② to switch the working mode. Bo: body mode co: counting mode
sure: surface mode. Press the button ① 3 times to set the alarm temperature
Press the button ② to switch the alarm temperature from 36℃ to 39℃. Press the
button ① 4 times to set the volume
Press the button ② to switch the volume from U0 to U4. Press the button ① 5
times to set the language
Press the button ② to set the language CH/EN/KO/PT/ES/JP/IT/DE/FR/RU/NL/AR
CH: Chinese EN: English KO: Korean PT: Portuguese ES: Spanish JP: Japanese IT:
Italian DE: German FR: French RU: Russian NL: Netherlands AR: Arabia Press the
button ① 6 times to set the squeeze amount of hand sanitizer
Press the button ② to set the extrusion time between 0.1 and 2.0 seconds Press
the Button ① for 2S or more: on/off
Mounting
(1) Tripod mounting: There is a screw connection on the bottom which can be
connected with a tripod. (Fig. 11)| (2) Wall-handing: There are two hanging
holes on the backside that can be fixed with nails. (Fig. 12)
---|---
|
(3) Desktop stand: Put the Intelligent Sensor Soap Dispenser in the desktop
stand to use(Fig. 13)| (4) Wall-handing Desktop stand: there are two hanging
holes on the backside that can be fixed with nails. (Fig. 14)
|
(5) Hanging the desktop stand on the tripod (Fig. 15)| (6)Power On/Off: Press
the switch button on the right side of the device(Fig. 16)
|
(7)Battery installation: Open the battery cover, take out the battery box,
unscrew the screws, and put in 4 AA batteries (Fig. 17).|
|
Warnings
- Do not pour hand sanitizer into Temperature Measuring Probe and Proximity Sensor.
- Make sure that it is standing upright after filling in hand sanitizer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>