Dongguan Koppo Electronics ANC-817K7 Wireless Bluetooth Earbuds User Guide
- June 6, 2024
- Dongguan Koppo Electronics
Table of Contents
Dongguan Koppo Electronics ANC-817K7 Wireless Bluetooth Earbuds
Package Contents
Product Overview
Charging Case
Wearing Gulde
- Select ear tips of the most fitting size provided( large, medium, small).
- Please install the fitting ear tips on the earphone.
- Pick up the earbuds accordingly (R/L), and rotate the earbuds according to the direction of the arrows for more stable fitting.
Instruction
-
Initial use:
For the first charge.please remove the insulation film on charging port of the earbud. -
Power On:
Open the charging case, the earbuds will power on and you can hear prompt voice “Power On”. White LED lights on 1s. -
Pairing:
Open the phone Bluetooth to search ‘1ce Drop Pro” and hear “Connected” and light goes out
Note: Either earbud can be used separately.
“The earbuds can be automatically re-connected to the last connected devices.
Technical Specification
- Item Number: lWS-817K7
- Bluetooth Version: 5.2
- Bluetooth Profiles: HFP/HSP/A20P/AVRCP Wireless Range: 360° 10M
- Music Time: Up to 6 Hours
- Used with the Charging Case: Up to 24 Hours
- Charging Time: About1.5Hours
- Charging Parameter: Earbuds : SI// 35mA
- Charging case: SI// 400mA
- Battery Type: Lithium-ion battery
- Earbuds: 3. ‘NI 45 mAh Charging Case: 3.7V / 500mAh Frequency Response: 20Hz-20KHz Sensitivity: 95±3dB
Battery Life:
Due to different systems, audio formats. personal usage habits (such as
volume) of mobile phones and other devices, the battery He may vary for the
specific situation.
Operation
Earbuds Operation Guide
Light indicator
Charging case light indicator
Earbuds Light Indicator
The product name, trademark, model, MIC ID and LOGO can be found in the instruction manual and the packaging.
FAQ
- The earbuds do not tum on: Please confirm the earbuds have power left, if not charged please charge up and then power on.
- Unsuccessful Bluetooth Pairing: Make sure that the earbuds are turned on and in pairing state, the pairing distance is kept within 1m.
- Some Bluetooth devices require a pairing pass”‘l’.lrd Please enter “0000”
- Automatically Re-connect: After Power on, it will automatically re-connect to the last connected device.
- How long will it tum off automatically when it doesn’t connect? The earbuds will automatically tum off after 10mins if it doesn’t connect with Bluetooth devices.
- lf the left and right earbud don’t sync or connect the phone because the earbud Is In re-connection mode or other mode, or if you can’t find your preferred Bluetooth device, you can restore a factory reset: Press and hold for 10 seconds in the shutdown state, the white light flashes 3 times quickly indicating that the clearing is successful.
- When the earbuds cannot be charged, please wipe the earbud’s metal charging spots.
Customized Pre-Set
Customized EQ
Google Fast Pairing
Warning
NOTE: This equipment has been tested and found to comply with the limits
for a Class 8 digital device, pursuant to part 15 of the FCC Rules. These
limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
COUMI EQ
COUMI EQ app can customize sound curves for EACH user by testing your hearing
and create sound curve accordingly, then save the sound curve into the
earbuds. Once the sound curve has been saved.no matter what Bluetooth-enabled
player or what music you will choose, you can enjoy music by our earbuds with
your own sound curve inside.
FREELY CUSTOMIZE MUSIC FOR YOUR EAR!