audio-technica AT-LP3XBT Automatic Wireless Turntable User Guide

AT-LP3XBT

Quick Start Guide
Automatic Wireless Turntable

Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
www.audio-technica.com
©2021 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com

Contents

Preparation

1. Set the platter.

2. Attach the drive belt to the motor pulley (brass-colored).

3. Remove the red ribbon from the drive belt.

4. Set the felt mat.

5. Mount the product on a level surface.

6. Insert the headshell into the tonearm, and remove the cartridge’s protector.

7. Attach the counterweight to the back of the tonearm, and slowly turn it counterclockwise (to the left).

8. Turn the counterweight to adjust the tonearm’s balance so that the tonearm is level when you release the headshell.

9. Set the tracking force gauge ring to the “0” position.
   After that, turn the counterweight and the tracking force gauge ring together counterclockwise (to the left) to the “2” position.

10. Set the anti-skate control dial to “2”, the same value as the tracking force value.

Wired Connection

This product has a built-in phono equalizer function. You can use the product, even if you do not have a phono amplifier or connectable equipment with a built-in phono amplifier, by connecting an active speaker, etc. Use the pre- amplifier selector switch to set the output.

Wireless connection

1. Set your Bluetooth headphones, speakers, etc. to pairing mode.
2. Press and hold the wireless function button.
3. When pairing is complete, the indicator LED lights in blue.

Play

1. Remove the cartridge’s protector.
2. Place a record on the felt mat, select the size with the sizeselector, and then select the speed with the platter speed button.

Auto

1. Press the START button.

Manual

1. Raise the tonearm by lifting the tonearm lift control lever to the UP position.
2. Position the tonearm over the desired location (groove) on the record.
3. Lower the tonearm by moving the tonearm lift control lever to the DOWN position.

Stop

1. If the product is connected via a wired connection, lower the volume of the connected device (amplifier, etc.).
2. Press the STOP button.
3. Attach the cartridge’s protector.

Cleaning

For details about turntable and cartridge care accessories, visit https://www .audio-technica.com.

Stylus

Record

• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is under license. Other trademarks and trade names are those of their respective owners.

https://www.audio-technica.com

Support
For more information on how to use this product and troubleshoot any problems, refer to the user manual on the Audio-Technica website.

References

• Global Support｜Audio-Technica Corporation オーディオテクニカ
• Audio-Technica Corporation | Headphones, Microphones & Turntables | Audio-Technica
• Audio-Technica Corporation | Headphones, Microphones & Turntables | Audio-Technica

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>