neato D8 Intelligent Robotic Vacuum User Guide
- June 6, 2024
- neato
Table of Contents
D8 | D9 | D10
Quick start guide
What’s in the box
Quick start guide
Insert plug behind the charging base. Shorten the cord as needed by wrapping
it behind
the charging base.| Select a clear area with good Wi-Fi coverage. Make sure
the charging base is against the wall and plugged in.| Place the robot against
the charging base. When docked properly, the battery icon will
light up.
---|---|---
Download the MyNeato application.| Check your mobile device setting to make
sure the Bluetooth is switched on.| Finish your setup process with the MyNeato
application.
---|---|---
Helpful hints
Set up your house
Before the robot starts to vacuum, pick up items that could become tangled,
such as cables, socks, and shoelaces. Tuck fringes under rugs.
Clean with the MyNeato app
Use the MyNeato app to:
- Schedule your robot
- View cleaning maps
- Create No-Go Zones
Keep your charge base secure
Your charge base comes with a pad designed to keep it secure on a hardwood
floor. Remove these pads if you plan to place the charging base on the carpet.
Need assistance?
Learn more about your robot:
www.NeatoRobotics.com/UG
We are here to help. Contact us at: www.NeatoRobotics.com/contact-
us
P/N 515-0095 Rev A
Neato Robotics®, Inc.
50 Rio Robles
San Jose, CA 95134, USA
Neato B.V.
WTC Schiphol Airport, Toren D
Schiphol Boulevard 359
1118 BJ Schiphol, Netherlands
NeatoRobotics.com