HAOQIN H10 Android Tablet Pc 10.1 Inch 2GB RAM User Guide
- June 6, 2024
- HAOQIN
Table of Contents
- HAOQIN H10 Android Tablet Pc 10.1 Inch 2GB RAM User Guide
- SAFETY INFORMATION
- KEY FUNCTIONS
- INTRODUCTION
- SELECT LANGUAGE
- SELECT WI-Fl
- SET DATE &TIME
- ADD YOUR ACCOUNT
- SET SCREEN LOCK
- RESTORE APPS & DATA
- GOOGLE SERVICES
- To insert SIM / SD card
- RESET OPERATION
- Recovery Mode
- WARNING:
- Warning Statement
- following measures:
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HAOQIN H10 Android Tablet Pc 10.1 Inch 2GB RAM User Guide
SAFETY INFORMATION
Transportatioo Safely
Please observe all transportation laws end regulations Hospital Safety
The Tablet PC must be turned olfwhen you are in a hospital.
You have to abide by the relevant regulations of hospital and turn your
devi<;e off when you are near medical equipment, Any wireless transmission
device will interfere that equipment not fully-protected. Airport Safely
Remember to follow all airport and night safety regulatioos.
Wa1er Hazard Your tablet is no1 waterproof. Keep your tablet away from water
or liquid to avoid damage. Emergency Calls
Make sure your tablet is switched on and in a service area. In home screen,
tap the phooe key and dial the emergency number. Battery Usage
For better performance and longer battery life, it is reccmmended that you
charge the battery fully 7 hoots before using the tablet for the first time
and that you initially complete two to three charge cycles. Battery life win
vary based oo device seWngs, usage, and others. Certain apps may reduce
battery life.
KEY FUNCTIONS
Model 1: 30/WIFI Tablet (2 SIM Card Slot ;-1 SO Card Slot)
Modal 2: WIFI Tablet (Only One TF card Slot)
Model 3: WIFI Tablet (Only One TF Card $101)
INTRODUCTION
When you inltially power on your table!, there will be a series ol steps to set up basic features.
SELECT LANGUAGE
While on the wetoome screen. please saoll to select your language.
SELECT WI-Fl
This process allows the device to oonnect to the internet. Click on the Wi-Fi name you need to link and enter the WiFi password, that lhe device will be connected to. Please note that any
SET DATE &TIME
Adjust the date and ~me to local time if needed
ADD YOUR ACCOUNT
Sign in lo your Google account in order to keep accounts streamlined wl1h Google seivlces. Your Grnall aooount wtll be used for some Google programs. II you don’t have a Google account cliek to create a new account In 1hiS step you can also setup paymen1 info if needed.
SET SCREEN LOCK
Please choose to skip screen lock or be sure to use the password you can remember. And If you fo,got 1he password or need to clear your password, please see the RESET OPERATION.
RESTORE APPS & DATA
You can restore your previous applications and data that have been backed up from another device. You may also setup the tablet as a new device.
GOOGLE SERVICES
Click to acid or remove Google services which include backup, Localion Service, and Google Niow.
Installation of th& SIM card (Notice:3G/W1A tablet can connect internet vts
WIA. Bluetooth or sim card. If you wo!Ad like to make calls, you l’lave ro put
sim card into the slot, otherwise. you can only use WIA)
Waming: Please keep the S1114 card oul of the reach of children, the S11\4
card and Its contact are &aslly damaged due to scratclllng or bending. Plaas&
use cautiously when carrying, installing or taking out th& S1114 card.
Note: Please contact your cellular phone service provider directly to
obtain your SIM card
To insert SIM / SD card
- Push the SIM card slot cover out and insert1he SIM card in10 SIM card slot.
- Insert the SD card (Foc additional storage capacl\y)
- Put back the card cover and power on !he Tablet
RESET OPERATION
If you forgot your password or need lo clear your password, please follow the below steps to do it.
- Please turn off the tablet
- Press the power button and the volume down button simultaneously
- Press the volume down button to select Clear eMMC
- Power on button confinns reset (you will see lhe follow picture)
Recovery Mode
means restore the factory settings, press the power button to confirm, the system will <1ulomatically complete this process. automatically restart. (ALL DATA WILL BE LOST) Faslboot Mode means development mode, not recommended. Normal B001 means normal restart. no data loss.
WARNING:
Arrt changes or modifications without permission which operated by
unauthoriZed user will result In Internal failure, system halted.
This device complies with parts 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may no cause harmf\JI
Interference, and (2) this device must accept any Interference that may cause
undesired operation.
Note: This equipment has been tested and found lo oomply with the limits for a
Class B digital device, pursuant lo Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful inlel’fere.ice in a residanUal Installation. This equipment generates.
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However. there Is no guarantee that Interference will not
occur In a particular lnstallaUon. If this equipment does cause harmful
Interference to radk> or tek3vision reception, which can be determined by
turning lhe equipment off and on. the user Is encouraged to try to correct the
interference by one or more or the rotlowing measures:
– Reorient or relocate the receMng antenna.
– Increase the separation between the equipment and receiver.
~onnect lhe equipment into an outlet on a circuit different from that lo which
the receiver is connected.
–Consult Iha dealer or an expe~enced radio/TV technician for help.
SAR tests are oonducted using standard operating positions accepted by the FCC wi1h 1he phone transmitting at its highestcertified power level in all tested frequency bands, althoogh the SAR Is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below 1he maximum value, in general, the doser you are to a wireless base station antenna. the lower the power output
Before a new tablet Is available for sales to 1he public, It must be tested
and certified to !he FCC !hat it does not exceed the exposure limit
established by the FCC.
Tests for each tablet are performed In positions and locations (e.g.al the ear
and worn on the body) as required by the FCC.
For body worn operallon, this model tablet has been tested aod meets the FCC
RF exposure guidelines when used with an accessory designated for this product
or when USed with an accessory that contains no metal and that positions the
handset a minimum of 1.0cm from the body. Non-<:0mpliance wtth the above
restrictions may rasult in violation of RF exposure guidelines
Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>