BaByliss PRO BABSS3000T Professional Straightener Instruction Manual
- June 6, 2024
- BaByliss PRO
Table of Contents
- BaByliss PRO BABSS3100T Professional Straightener
- IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS OPERATING INSTRUCTIONS
- STRAIGHTENING BASICS
- STYLING TIPS USING STRAIGHTENER
- NANO TITANIUM™
- GET TO KNOW YOUR PROFESSIONAL STRAIGHTENER
- FEDERAL COMMUNICATIONS COMMISSION NOTICE
- SUPPLIER’S DECLARATION OF CONFORMITY
- USER MAINTENANCE
- LIMITED FOUR-YEAR WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BaByliss PRO BABSS3100T Professional Straightener
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following: READ ALL INSTRUCTIONS BEFORE USING KEEP AWAY FROM WATER.
DANGER
Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:
- Always unplug appliance immediately after using.
- Do not use while bathing or in the shower.
- Do not place or store appliance where it can fall or be pulled into a tub or sink.
- Do not place in, or drop into water or any other liquids.
- If an appliance falls into water, unplug it immediately. Do not reach into the water.
WARNING
To reduce the risk of burns, electrocution, fire, or injury to persons:
- This appliance should never be left unattended when plugged in.
- Do not pull, twist, or wrap line cord around appliance.
- This appliance should not be used by, on, or near children or individuals with certain disabilities.
- Use this appliance only for its intended use, as described in this manual. Do not use attachments not recommended by the manufacturer. Do not use an extension cord to operate appliance.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to an authorized service center for examination and repair.
- Keep the cord away from heated surfaces.
- Never use while sleeping.
- Never drop or insert any object into any opening.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not use an extension cord with this appliance.
- This appliance is hot when in use. Do not let heated surfaces touch eyes or skin.
- Do not place the appliance on any surface while it is operating.
- Do not touch hot surfaces of the appliance. Curved housing above/below plates get hot. Do not touch directly while iron is operating.
SAVE THESE INSTRUCTIONS OPERATING INSTRUCTIONS
This appliance is intended for professional use. Use on Alternating Current (60 Hz) only. Standard appliances are designed to operate at 120 volts AC. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
STRAIGHTENING BASICS
- Plug the straightening iron into a standard electrical outlet (120V). It is not necessary to touch the iron with your hand to judge readiness.
- Use the +/- temperature controls to select the setting for your hair type. You can use the chart outlined below as a reference. The iron will heat up very quickly.
TEMPERATURE SETTINGS HAIR TYPE
150°C (300°F)
(Use lower temperatures for chemically treated hair)
| Fragile, very fine hair
170°C (340°F)
(Use lower temperatures for chemically treated hair)
| Thin, easy-to-straighten hair
195°C (380°F)
(Use lower temperatures for chemically treated hair)
| Normal textured hair
210°C (410°F)| Wavy or curly hair
240°C (465°F)| Coarse, very thick hair
- Section dry hair evenly, and comb each section. Position the iron on the hair as far up as you want hair to be straightened, being careful not to let the iron touch the scalp. Close the iron with the hair between the two plates and gently pull the iron down to the end of the section of hair you are straightening. Repeat this process several times, if necessary. Let the hair cool before combing.
STYLING TIPS USING STRAIGHTENER
For short, spiky looks use gel or spray and hold the sections up and away from the head while you straighten. For smoothing and taming curly hair, or creating a stylish, smooth bob, use the straightener just on the ends, leaving the hair wavy at the roots for lift and body. For this type of effect, keep the straightener moving while following the shape of your hairstyle. For looser waves, close and lock the iron and use it as a wand. Wrap hair around the front housing and hold for a few seconds to create a looser, free-flowing wave. For tighter curls, turn iron 180° (top-down) and start close to the root or wherever you want the curl to start. Lightly hold hair between plates and turn the iron as you move it down the strand. The slower the turn, the tighter the curl. Adjust the angle to create different types of curls. STYLING TIPS USING STRAIGHTENER For short, spiky looks use gel or spray and hold the sections up and away from the head while you straighten. For smoothing and taming curly hair, or creating a stylish, smooth bob, use the straightener just on the ends, leaving the hair wavy at the roots for lift and body. For this type of effect, keep the straightener moving while following the shape of your hairstyle. For looser waves, close and lock the iron and use it as a wand. Wrap hair around the front housing and hold for a few seconds to create a looser, free-flowing wave. For tighter curls, turn iron 180° (top-down) and start close to the root or wherever you want the curl to start. Lightly hold hair between plates and turn the iron as you move it down the strand. The slower the turn, the tighter the curl. Adjust the angle to create different types of curls.
For zig-zag styles, open the iron, wrap hair around plates/ housing in a figure 8, hold for a few seconds and release. For flip and bend waves, turn the iron as you reach the end of hair strand – inward or outward – to create a flip, bend or more body. For ideal results, use finishing sprays after styling, if desired. Unprecedented performance, design, and versatility – the Prima3000™ by BaBylissPRO®.
NANO TITANIUM™
Your Nano Titanium™ straightening iron has many benefits. Titanium is an
exceptional conductor of heat and is stable in ultra-high temperatures. The
titanium plating technology helps provide the ultimate heat performance for
beautiful, healthy-looking hair. Titanium’s lightweight and smooth surface
helps reduce time and fatigue and is exceptionally resistant to chemical
corrosion. This Nano Titanium™ iron will give your hair a smooth, silky shine
while eliminating frizz.
See the PRIMA3000 demonstration videos at http://www.prima3000.com/videos
GET TO KNOW YOUR PROFESSIONAL STRAIGHTENER
Model BABSS3100T – 1″
NOTICE
THIS PRODUCT IS EQUIPPED WITH AN INSTANT HEAT CIRCUITRY. STATE-OF-THE-ART
TECHNOLOGY ALLOWS THE HEATER TO REACH THE OPERATING TEMPERATURE IN LESS THAN
ONE MINUTE. DO NOT LEAVE PRODUCT ON OR PLUGGED IN WHILE NOT IN USE. UNIT WILL
BURN OUT IF POWER IS KEPT ON FOR AN EXTENDED PERIOD OF TIME. WARRANTY WILL BE
VOIDED. TURN UNIT OFF AND UNPLUG WHEN NOT IN USE.
FEDERAL COMMUNICATIONS COMMISSION NOTICE
WARNING : Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SUPPLIER’S DECLARATION OF CONFORMITY
Brand: BaBylissPRO®
Model No.: BABSS3000T
Description: Straightener
Responsible Party: Conair Corporation
1 Cummings Point Road
Stamford, CT 06902
203-351-9000
Standards: FCC Part 15 Subpart B, ANSI C63.4-2014
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. DATE OF ISSUE: 08/08/2019.
USER MAINTENANCE
Your iron is virtually maintenance free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, let it cool and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.
LIMITED FOUR-YEAR WARRANTY
BabylissPro will repair or replace (at our option) your unit free of charge for 48 months from the date of purchase if the appliance is defective in any workman ship or materials. To obtain service under this warranty, return the defective product to the service center listed below, together with your purchase receipt and $5.00 for postage and handling. California residents need only provide proof of purchase and should call 1-800-326-6247 for shipping instruc tions. In the absence of a purchase receipt, the warranty period shall be 48 months from the date of manufacture. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 48-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL BABYLISSPRO BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
SERVICE CENTER
BabylissPro
Service Department
7475 North Glen Harbor Blvd.
Glendale, AZ 85307
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>