BaByliss PRO BNTW75 Nano Titanium Curling Wand Instruction Manual
- June 6, 2024
- BaByliss PRO
Table of Contents
BaByliss PRO BNTW75 Nano Titanium Curling Wand
OPERATING INSTRUCTIONS
This appliance is intended for professional use. Use on Alternating Current
(50-60Hz) only. Standard appliances are designed to operate at 100-240 volts
AC.
This appliance has a polarized plug (one blade is wider than the other). As a
safety feature, this plug will fit into a polarized outlet only one way. If
the plug does not fit fully into the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to defeat this
safety feature.
DUAL VOLTAGE
This curling iron has dual voltage. It will automatically adjust to the proper
voltage. Use an adapter plug with correct configuration prior to use in
outlet.
IMPORTANT NOTICE
These styling appliances have a special protective application and the barrel
will be extremely hot when the temperature regulator dial is set at its
highest setting (430˚F). Extra care should be taken when using. This product
may emit smoke during initial use. The smoke is not harmful and will quickly
disappear. It is only the protective application on the heating element being
burned off.
CURLING WAND BASICS
- Plug the appliance into a standard electrical outlet (100-240V).
- Button controls for 5 temperature settings:
TEMPERATURE HAIR TYPE SETTINGS
1 (285˚F)| Fragile, very fine hair
2 (320˚F)| Thin, easy-to-curl hair
3 (355˚F)| Normal textured hair
4 (395˚F)| Wavy or curly hair
5 (430˚F)| Coarse, very thick hair
- Section hair evenly, and comb each section before winding. Wind the hair around the wand as far up as you want it to be curled, being careful not to let the wand touch the scalp.
- Refer to the “Super Styling Guide” for techniques. Hold hair in place for 8 to 12 seconds.
- To remove the curling wand, unwind the hair. To set the curl, do not comb or brush hair until it cools.
- Some experimenting is necessary when first using the curling wand or when changing to a different hairstyle.
SUPER STYLING GUIDE
Your best looks begin with a good haircut that’s well maintained. Always treat
hair right with superior quality shampoos, conditioners, and finishing
products.
For looser, free-flowing curls, roll a larger section of hair around the
barrel. For tighter, bouncier curls, roll a smaller section of hair around the
barrel.
NANO TITANIUM
Your Nano Titanium™ curling wand has many benefits. Nano titanium is an
exceptional conductor of heat and is stable in ultra-high temperatures. The
nano titanium barrel combines the technology of microparticles of titanium,
providing the ultimate heat performance for beautiful, healthy-looking hair.
Nano titanium yields maximum far-infrared heat, penetrating the hair for
gentle styling without damaging hair. This nano titanium wand will give your
hair a smooth, silky shine while eliminating frizz.
NOTICE
THIS PRODUCT IS EQUIPPED WITH AN INSTANT HEAT CIRCUITRY. STATE-OF-THE-ART
TECHNOLOGY ALLOWS THE HEATER TO REACH THE OPERATING TEMPERATURE IN LESS THAN
ONE MINUTE.
DO NOT LEAVE THE PRODUCT ON OR PLUGGED IN WHILE NOT IN USE. UNIT WILL BURN OUT
IF POWER IS KEPT ON FOR AN EXTENDED PERIOD OF TIME. WARRANTY WILL BE VOIDED.
TURN THE UNIT OFF AND UNPLUG WHEN NOT IN USE.
GET TO KNOW YOUR PROFESSIONAL CURLING WAND
USER MAINTENANCE
Your wand is virtually maintenance-free. No lubrication is needed. Keep all
vents and openings clear of dirt and dust. If cleaning becomes necessary,
disconnect the unit from the power source, allow to cool, and wipe the
exterior with a cloth. If any abnormal condition occurs, unplug the unit,
allow it to cool, and return it for repair to an authorized service
representative only. No repairs should be attempted by the consumer.
CAUTION
NEVER allow the power supply cord to be pulled or twisted. Never wrap the cord
around the unit. Damage will occur at the high flex point of entry into the
unit, causing it to rupture and short circuit. Inspect the cord frequently for
damage. Stop use immediately if the damage is visible or if the unit stops or
operates intermittently.
STORAGE
When not in use, your appliance is easy to store. Allow unit to cool, then
simply put back in the box and store out of reach of children in a safe, dry
location. Do not jerk or strain cord at plug connections.
WARNING: To reduce the risk of burns, electrocution, fire, or injury to
persons:
- Plug the iron into an electrical outlet.
- The iron should never be left unattended
- Do not pull, twist, or wrap cord around the iron.
- This iron should not be used by, on, or near children or individuals with certain disabilities.
- Use the iron only for its intended use as described in this guide.
- Do not use attachments not recommended by the manufacturer.
- Never operate this iron if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged or has fallen into water. Return the appliance to a service center for examination and repair.
- Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
- Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
- Never use while sleeping.
- Never drop or insert any object into any opening or hole in the iron.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not use an extension cord with the iron. Avoid multiple cables to a plug.
- The iron and casing are hot when in use. Do not let eyes or bare skin touch heated surfaces.
- Do not place the iron directly on any surface while it is hot or plugged in.
- Do not touch hot surfaces of the iron.
- This iron has no user-serviceable parts. Servicing should only be performed by an authorized service representative.
- After using, ensure the iron has completely cooled before storing in a safe, dry location.
- Do not use this appliance near bathtubs, showers, toilets or any other receptacle containing water.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision
- Children should be supervised to ensure that they do not play with the appliance.
- Before plugging in, read the information about dual voltage contained in the “dual-voltage” section of this manual.
LIMITED 2-YEAR WARRANTY
(U.S. and Canada Only)
BaBylissPRO will repair or replace (at our option) your unit free of charge
for 24 months from the date of purchase if the appliance is defective in
workman ship or materials. To obtain service under this warranty, return the
defective product to the service center listed, together with your purchase
receipt and $10.00 for postage and handling. California residents need only
provide proof of purchase and should call
1-800-326-6247 for shipping
instructions. In the absence of a purchase receipt, the warranty period shall
be 24 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 24-MONTH DURATION OF
THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how
long an implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL BABYLISSPRO BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH
BNTW75(100_125)UC IB-16264B.indd 1
OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some
states do not allow the exclusion or limitation of special, incidental, or
consequential damages, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other
rights, which vary from state to state.
SERVICE CENTER
BabylissPRO Service Department 7475 N. Glen Harbor Blvd. Glendale, AZ 85307 ©
2019 BabylissPRO