Airsee Nail Drill: DR-203 Electric User Manual & Safety Tips
- June 6, 2024
- AIRSEE
Table of Contents
The AIRSEE DR-203 Electric Nail Drill User Manual and Safety Tips is an essential guide for anyone who has purchased this product. This user manual contains important safety instructions that must be read and followed before using the device to avoid potential hazards that could result in personal injuries or damage to the device. The manual provides detailed instructions on how to use the nail drill, including attaching the drill bit firmly to the drill head, connecting the nail drill power supply, and adjusting the speed controller to accelerate or decelerate the rotation speed. The manual also contains a list of potential problems that may arise during usage and their corresponding terms of settlement. Additionally, the user manual provides detailed specifications of the device, including input voltage range, output voltage, and customer service information. AIRSEE offers a 6-month limited warranty on quality-related issues, and customers can apply for an extra 6-month warranty extension by registering on their website. By reading and following the instructions in this manual, users can ensure safe and effective usage of their AIRSEE DR-203 Electric Nail Drill.
AIRSEE DR-203 Electric Nail Drill
Thank you for choosing AIRSEE! Please read this user guide carefully and keep it in an accessible location so you may refer to it later.
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USING. To reduce the risk of burns, electrocution, fire, or injury to persons. Please be sure to read the safety instruction as follow to avoid potential hazards that could result in personal injuries or damage to the device. Check before Using
- Check the power supply cord for damage before the first use and during the life of the device. Do not use this device if it has a damaged cord or plug or it is not working properly or damaged.
- Do not plug this device into a voltage system that is different from the voltage system specified on the device or charger. Use with improper voltage will damage the device and VOID warranty.
- Please use the original charger only.
NOTE FOR USING
- Do not draw out the connecting wires during use or touch the plug with the wet hand to prevent electric leakage and shock or fire. Please turn the power off after use.
- Do not use the crooked or damaged nail drill bit or replace the bit when the power is on.
- Adjust the speed gradually, not abruptly. Please stop to use once the unusual movement and noise happens.
- Misuse, dropping or excessive force may cause device damage.
- Children under 18 years of age should not use this device
- Do not dispose of the device in heat or fire.
Note for Injury
- Having manicures done frequently can cause injuries to the nails as well.
- If you need to remove the gel polish of natural nails, try to use the nail polish remover pads to avoid damage to the nail bed with the improper operation.
- Do not use the device if you have an open wound on your nail or hand.
- If you have any skin diseases, heat-sensitive, allergic reaction, onychomycosis or any other disorder, you should consult your doctor and medical professional before using the device.
The operator shall be responsible for any consequences including product damage or accidents if not strictly complies with the instructions. If you require any technical support, contact us at service@airseelife.com.
SAVE THESE INSTRUCTIONS
EVEN DRILL BITS 
**HOW TO USE**
- Attach the drill bit firmly to the drill head.
- Connect the nail drill power supply. The sliding switch on the power cord turns the drill on and off.
- Move the switch to the right for clockwise spin or to the left for anticlockwise spin. Slide the speed controller (also located on the power cord) to accelerate or decelerate the rotation speed.
- After the polishing is finished, please turn off the machine and return the control switch to the middle position.
- ON/OFF F/R Button
- Speed Control
- Drill Bit
- DCSocket
Problem and Terms of Settlement
| Misoperation | Causing | Terms of settlement |
|---|---|---|
| Changing the nail drill bit | Turn off the po wer when | |
| when the power is on | 1. Motor burns out | changing the nail drill bit |
| When not in use, the | 2. Bearing damages | |
| speed is adjusted to | (Loud Noise) | Turn off the power when |
| the minimum, and the power is on | not in use | |
| The continuous working | ||
| time should not be too | ||
| Long time, Large load work | 1. Motor burns out 2. Device lifespan | |
| shortens 3. Bearing damages (Loud Noise) | long when the working condition is |
in heavy load. When the device is overheating, it should be
| | stopped immediately to
| | make it return to normal
| | temperature
Misoperation| Causing| Terms of settlement
---|---|---
Insert into a mismatched power supply| 1. Motor burns out| According
to the device voltage requirements, insert the matching power supply
Put the power cord at random/ Pull the power cord| 1. Power cord brakes 2.
Poor connection| Do not pull the power cord
Replace the original charger randomly| 1. Motor burns out 2. Easy to cause
short circuit| Use the original specification charger
Dust into device/ device drops to the ground or by other impacts| 1.
Bearing damages (Loud Noise) 2. Motor gets hot 3. Rotational speed slows down|
Clean dust, add the dust-proof protection of the dustproof hood/ Avoid device
drops or by other impacts
Insert the nail drill bit into the device incorrectly| 1. Drill bit
falls out 2. High vibration 3. Drill bit stucks| Insert the nail drill bit
into the device correctly/ If the drill bit stuck, please try to take it out
hard
The size of drill bit is not suitable| Can not insert the drill bit into the
device| Use standard drill bit
Water into the device / Operate in wet or moist conditions/Use a wet cloth
clean the device| 1. Motor burns out 2. Device lifespan shortens| Do not
operate in wet or moist conditions/ Only a dry cloth is allowed for cleaning
SPECIFICATION
- Input voltage range: 100-240V ~50/60Hz
- Output Voltage: DC 12V 1 A
- Email: service@airseelife.com
- Website : www.airseelife.com
- Warranty: 6-month limited warranty on quality-related issues
- Warranty extension: Extra 6-month warranty extension available by registering on www.airseelife.com
WARRANTY AND CUSTOMER SERVICE
AIRSEE offers a 6-month limited warranty on quality- related issues. Please apply for your extra 6-month warranty extension and download the user manual in other languages by registering on www.airseelife.com if needed.
FAQS
What should I do before using the AIRSEE DR-203 Electric Nail Drill?
Check the power supply cord for damage before the first use and during the life of the device. Do not use this device if it has a damaged cord or plug or it is not working properly or damaged. Also, do not plug this device into a voltage system that is different from the voltage system specified on the device or charger. Use with improper voltage will damage the device and VOID warranty.
How do I use the AIRSEE DR-203 Electric Nail Drill?
Attach the drill bit firmly to the drill head, connect the nail drill power supply, and adjust the speed controller to accelerate or decelerate the rotation speed. After the polishing is finished, please turn off the machine and return the control switch to the middle position.
What should I do if I encounter problems during usage?
The manual contains a list of potential problems that may arise during usage and their corresponding terms of settlement. For example, if you change the nail drill bit when the power is on, it may cause motor burnout. If this happens, you need to change the nail drill bit and turn off the power before doing so.
Can children use the AIRSEE DR-203 Electric Nail Drill?
No, children under 18 years of age should not use this device.
What should I do if I have an open wound on my nail or hand?
Do not use the device if you have an open wound on your nail or hand.
How can I extend my warranty for the AIRSEE DR-203 Electric Nail Drill?
AIRSEE offers a 6-month limited warranty on quality-related issues, and customers can apply for an extra 6-month warranty extension by registering on their website.
What is the input voltage range for the AIRSEE DR-203 Electric Nail Drill?
The input voltage range is 100-240V ~50/60Hz.
What is the output voltage for the AIRSEE DR-203 Electric Nail Drill?
The output voltage is DC 12V 1 A.
What should I do if I need technical support?
If you require any technical support, contact AIRSEE at service@airseelife.com.
Can I use the AIRSEE DR-203 Electric Nail Drill in wet or moist conditions?
No, do not operate in wet or moist conditions. Only a dry cloth is allowed for cleaning.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>