CONAIR 190 Style and Shine Natural Crystal Collection Instructions
- June 6, 2024
- ConAir
Table of Contents
STYLE & SHINE
natural crystal collection
INSTRUCTION &
STYLING GUIDE
Model 190
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:
READ ALL INSTRUCTIONS BEFORE USING KEEP AWAY FROM WATER
DANGER – Any hairdryer is electrically live even when the switch is off. To
reduce the risk of death or injury by electric shock:
- ALWAYS UNPLUG IT IMMEDIATELY AFTER USING.
- Do not use it while bathing or in the shower.
- Do not place or store appliances where they can fall or be pulled into a tub or sink.
- Do not place in, or drop into, water or other liquids.
- If an appliance falls into water, unplug it immediately do not reach into the water.
WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:
- This appliance should never be left unattended when plugged in.
- This appliance should not be used by, on, or near children or individuals with certain disabilities.
- Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water. Return the appliance to a Conair Service Center for examination and repair.
- Keep the cord away from heated surfaces. Do not pull, twist, or wrap the line cord around the dryer, even during storage.
- Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
- Never use while sleeping.
- Never drop or insert any object into any opening or hose.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not use an extension cord to operate the dryer.
- Do not direct hot air toward eyes or other heat-sensitive areas.
- Attachments may be hot during use. Allow them to cool before handling.
- Do not place the appliance on any surface while it is operating.
- While using the appliance, keep your hair out of it. Keep your hair away from the air inlets.
- Do not use a voltage converter.
- This appliance is not a toy. Keep away from children.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
This appliance is intended for household use only. Use on Alternating Current (60 hertz) only. Standard dryers are designed to operate at 110 to 125 volts AC. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
IMPORTANT
1875 WATT OPERATING GUIDE
Use of this dryer on the same circuit or fuse with other electrical
products or appliances may trip a 15 amp circuit breaker or blow a 15 amp
fuse. NEVER replace the fuse with one rated higher than the capacity of the
circuit. Doing so could result in an electrical fire.
CHECK ALSO SAFETY FEATURE EVERY TIME YOU USE APPLIANCE
This appliance is equipped with an Appliance Leakage Circuit Interrupter
(ALCI), a safety feature that renders it inoperable under some abnormal
conditions, such as immersion in water. To make sure the ALCI is functioning
properly, perform the following test. The purpose of this test is to allow you
to make sure the water sensing system (ALCI) is working.
-
Plugin the appliance and press the test button on the plug.
-
The appliance will stop working. There will be an audible click and the reset button will pop out. This indicates the ALCI is functioning properly.
-
To reset ALCI, the unit should be unplugged. Then push the reset button in and reinsert the plug into an outlet. Reset Test
-
If ALCI is not functioning properly, return the appliance to the nearest service center.
-
It is important that if immersion occurs, this unit be brought to a service center. Do not try to reset.
-
Be sure to repeat the test every time you use the unit to confirm ALCI is operational. Should the appliance go off and the reset button pop up during use, this could indicate a malfunction in the unit. Remove plug from the outlet and allow the appliance to cool. Reinsert plug into an outlet. The appliance should then function normally. If not, return it to an authorized Conair Service Center for evaluation and repair.
SUPER STYLING GUIDE
Your best looks begin with a good haircut that’s well maintained. Always treat
hair right with superior quality shampoos, conditioners, and finishing
products.
DRYING BASICS
- Shampoo and condition hair with products of your choice. Rinse thoroughly. Towel-dry hair to remove excess moisture. Using the dryer along with your styling brush, start at a lower setting and direct hot air through a section of hair at a time. Move dryer steadily across each section so that the hot air passes through the hair. Direct airflow at hair, not scalp. Clouds of negatively charged ions will help to reduce static electricity, control frizzy flyaways and contribute to your hair’s shine.
- Keep dryer’s air intake vents unobstructed and free from hair while drying.
- To avoid overdrying, do not concentrate heat on any one section for an extended length of time. Keep the dryer moving as you style. For pinpoint airflow, use the snap-on concentrator attachment.
- For quick touch-ups between shampoos, dampen hair with a mist of water before styling with the dryer.
- When using your dryer to create curls and waves, dry hair almost completely on a warmer temperature setting with the snap-on diffuser attachment, then finish styling with a cool shot feature to quickly close the hair shaft and lock in style.
BODY & VOLUME
To create extra volume, turn the head upside down while drying. Position the
airflow toward the roots for maximum lift. When hair is dry, toss head back
and brush hair into place.
STRAIGHTENING
Work with hair in sections when creating a super-straight look. Using a large
round brush (approximately 2″ in diameter), hold hair taut in each section and
bend ends slightly under as you dry.
MAKING WAVES
Tousled, natural-looking waves are easily created by grasping hair at the
roots and scrunching between fingertips while drying.
GETTING TO KNOW YOUR DRYER
The Conair® 1875 Watt Style & Shine Natural Crystal Collection Dryer is very
effective, even at lower temperatures, and helps create healthier-looking,
shinier, more manageable hair with maximum styling control.
POWERFUL MOTOR for faster drying and styling ease.
HEMATITE-INFUSED CERAMIC TECHNOLOGY is full-spectrum, infrared heat that
works on hair molecules to dry them inside and out. This fast and easy drying
process minimizes heat damage and makes hair less frizzy and more manageable.
Crystals are believed by some to have natural healing properties that can be
used as a form of self-care to help enhance and heal a person’s mind, body,
and spirit. Hematite is recognized as a grounding stone that is thought to
absorb negative energy and emit calming vibrations during stressful times.
IONIC TECHNOLOGY. Natural ion output helps to fight frizz and brings out
your natural shine.
REMOVABLE FILTER
prevents damaging lint buildup and extends motor life.
what’s your setting?
| speed/temp. | hair type |
|---|---|
| low/warm | delicate & thin |
| low/hot | average to thick |
| high/warm | thick or wavy |
| high/hot | hard to style |
This message about…
GROUND
FAULT
CIRCUIT
INTERRUPTERS
…can save a life!
IF YOU MUST USE YOUR HAIRDRYER IN THE *BATHROOM, INSTALL A GFCI NOW!**
Your local electrician can help you decide which type is best for you – a
portable unit that plugs into the electrical outlet or a permanent unit
installed by your electrician. The National Electrical Code now requires GFCIs
in the bathrooms, garages, and outdoor outlets of all new homes.
WHY DO YOU NEED A GFCI? Electricity and water don’t mix. If your hair
dryer falls into water while it’s plugged in, the electric shock can kill
you…even if the switch is off. A regular fuse or circuit breaker won’t protect
you under these circumstances. A GFCI offers you far greater protection.
A GFCI can save your life! Compared to that, the price is small! Don’t
wait…install one now
- A GFCI is a sensitive device that reacts immediately to a small electric current leak by stopping the electricity flow.
USER MAINTENANCE
Your dryer is virtually maintenance-free. No lubrication is needed. For proper
operating performance, the dryer must be kept clean. When cleaning is needed,
unplug the cord,
allow to cool and clean dust and lint from air intake openings with a small
brush or the brush attachment of a vacuum cleaner. The outer surface of the
dryer should be wiped clean with a cloth only. A blocked or clogged air intake
vent will cause the dryer to overheat. If overheating occurs, an automatic
safety device will shut the dryer or the heat off to prevent damage or
personal injury. If the unit or the heat turns off, unplug the cord and allow
the dryer to cool for 10 to 15 minutes before restarting. Make sure the air
vents
are clean.
CAUTION
NEVER allow the power-supply cord to be pulled, twisted, or severely bent.
Never wrap the cord tightly around the dryer. Damage will occur at the high
flex point of entry into the dryer, causing it to rupture and short circuit.
Inspect the cord frequently for damage.
Stop use immediately if the damage is visible or the unit stops or
operates intermittently.
If the cord or dryer is damaged or does not operate properly, return it for
repair to an authorized Conair service representative only. No repairs should
be attempted by the consumer.
STORAGE – Important
When not in use, your dryer should be disconnected, allowed to cool, and
stored in a safe, dry location, out of reach of children. Do not wrap the line
cord around the dryer. Allow the cord to hang or lie loose and straight at the
point of entry into the dryer.
LIMITED TWO-YEAR WARRANTY (U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your unit free of charge for 24
months from the date of purchase if the appliance is defective in workmanship
or materials. To obtain service under this warranty, return the defective
product to the service center listed on the back, together with your purchase
receipt. California residents need only provide proof of purchase and should
call 1-800-3-CONAIR for shipping instructions. In the absence of a purchase
receipt, the warranty period shall be 24 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED IN DURATION TO THE 24-MONTH DURATION OF THIS
WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitations may not apply to you. IN NO
EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED,
WHATSOEVER. Some states do not allow the exclusion or limitation of special,
incidental, or consequential damages, so the above limitation may not apply to
you. This warranty gives you specific legal rights, and you may also have
other rights, which vary from state to state.
Please register this product at
www.conair.com/registration
SERVICE CENTER CONAIR CORPORATION
Service Department 7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
©2020 CONAIR CORPORATION
For info on any Conair product, call
1-800-3-CONAIR or visit us on the web at
www.conair.com
20PD075797
IB-17035
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>