DMHC TC-480 LCD Six Pins Electric Display Bike Device Monitor Instruction Manual
- June 6, 2024
- dmhc
Table of Contents
DMHC TC-480 Display Manual
2. The main screen display content
3. Typical Operating Voltage 12V—-48V
| Model Function | TC428 | TC430 | TC470 | TC480 | TC485 | TC486 |
|---|---|---|---|---|---|---|
| Battery indicator | ||||||
| Auto dormancy | ||||||
| 3 Speed PAS | ||||||
| Manual cruise throttle propel | **** | |||||
| Pedal/throttle | ||||||
| 5Speed PAS | ||||||
| Instantaneous power display | ||||||
| Speed | ||||||
| ODO/TRIP | ||||||
| Average speed display | ||||||
| Intelligent error codes display | ||||||
| Kilometer/Mile Unit switch |
4. display description
Display
| Function|
Description
---|---|---
|
Speed
|
Speed, display unit by KWH or MP/H
|
ODO/TRIP
|
ODO for accumulative total mileage TRIP for single mileage Switch by function key
|
Battery indicator
|
Residual electricity display
|
Cruise identification
|
Display, for cruise state
|
Wheel diameter set
|
The manufacturer used to set up the diameter of the wheel
|
Throttle fault
|
Display , throttle abnormal
|
Brake instruction
|
Display when brake, If the display when not brake, can judge for brake fault
|
Light instruction
|
Display, lighting backlight
|
Motor fault
|
Display, Motor hall fault
|
Controller fault
|
Display, Controller failure
|
Current instruction
|
Points 5 level display the current value
|
PAS instruction
|
1-5 file display speed PAS
Operating instructions
Key
| Operation| Display| Function|
Description
---|---|---|---|---
| lx briefly| | ON| Click can turn on TC480 0 After this, Illumination
is switched on/off
with a keypress
2x briefly| | Turn on/off the
headlamp| Click and turn on /off the light
1 x long| | OFF| Pressing this button for longer witches the display off
| lx briefly| | PAS increase| Every click, PAS increase a gear, a total of
five gear
2x briefly| | ODO mileage| Continuous press 2 times, ODO mileage is displayed
lx long| | ODO mileage reset| Long press 2 seconds ODO mileage reset
| lx briefly| | PAS reduce| Every click, PASe a gear, total reduce of
five gear
2x briefly| | Trip mileage| Continuous press 2 times, TRIP, mileage is
displayed
lx long| | Trip mileage reset| Long press 2 seconds TRIP mileage reset
| lx long| | Set wheel diameter| Long press at the same time, peed
display space twinkle, Press key setting wheel diameter, After setting,
long press at the same time, the Wheel diameter set success
| 1x long| | Set the working voltage| Press and hold three buttons for 8
seconds and select the right voltage using the up/down button
---|---|---|---|---
Configuration instructions
Work voltage： 24V;36V； 48V
This display adapts to the Controller product by DONG MEI HE CHUANG
Carry high precision speed sensor 。
Closed system power
Drive LED headlight
Adapter motor： the motor have speed output （ SU ZHOU XIONG FEENG, SU ZHOU
BA FANG ）,
Using this motor can accurately display speed.
Ordinary motor。 Speed display in approximation, not accurate 。