VOLTOMAT FH-106145.3 Heating Ceramic Fan Heater Instruction Manual

: June 6, 2024
: VOLTOMAT

Table of Contents

IMPORTANT INSTRUCTIONS
PARTS DESCRIPTION
Heat setting:
THERMOSTAT
SAFETY SYSTEM
MAINTENANCE
TECHNICAL DATA
Recycling – European Directive 2012/19/EU
ERP information (GB)
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VOLTOMAT FH-106145.3 Heating Ceramic Fan Heater Instruction Manual

Thank you very much for purchasing our products. In order to ensure correct operation, please read this manual and instruction carefully before use.

This product is only suitable for well insulated spaces or occasional use.

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, burns and other injuries.

Read and save these instructions. Attention: pictures in the IM are for reference only.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
CAUTION — Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
This appliance is intended to be used in household and similar applications.
WARNING: This heater is not equipped with a device to control the room temperature. Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
WARNING: In order to avoid overheating, do not cover the heater.
The heater must not be located immediately below a socket outlet.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
Make sure the appliance is in good condition after remove it from the package.
Check your mains voltage; it must match the specification of this heater.
Check the power cord and plug carefully before use to ensure that they are not damaged.
Be sure the power is turned off before unplugging the heater. Do not touch the plug with wet hands.
Don’t cover the heater.
Don’t allow moisture and dust to enter the appliance. Don’t use this heater in bathrooms or laundries. Store it in dry areas.
Don’t put the heater on soft surfaces such as beds or sofas.
Children must not play with or plug in the heater. Keep children away from the package. Polyethylene bags can be dangerous.
Avoid using extension cords, as they may cause a fire hazard due to overheating.
Indoor use only.
Do not allow the power cord to hang (e.g over the edge of a table or counter) or place/run the power cord under rugs, carpeting, or in high-traffic areas where it may be tripped over or pulled.
Do not plug or unplug the appliance from the electrical outlet with a wet hand.
Do not put any stress on the power cord where it connects to the appliance, as the power cord could fray and break.
Keep the power cord and product always away from heated surfaces.
Do not insert any other objects into the heater, as it may cause an electric shock, fire or damage to this appliance.
Do not use this appliance to dry or heat clothing, shoes, pipes or any other items.
Use the appliance in a well-ventilated area, this heater is hot when in use, to avoid burns, do not let bare skin touch a hot surface, if provided, use handle when moving this heater, keep combustible materials, such as furniture pillows, bedding, paper, clothes, and curtains at least 3 feet ( 0.9 meters) from all sides of the heater.
Use this heater only as described in the manual, any other use not recommended by the manufacturer may cause fire, electric shock or personal injury.
Do not operate the heater with a damaged cord or plug.
After the heater malfunctions or has been dropped or damaged in any manner, return the appliance to a service facility for examination, electrical or mechanical adjustment or repair.
The appliance should not be operated by means of an external timer-switch or by means of a separate system with remote control not originally belonging to this appliance.
This heating device is not suitable for assembling in vehicles and machines.
The rotor guard shall not be disassembled/opened to clean the rotor blades.
This appliance is not a toy.
Do not immerse the unit in water.
To avoid the risk of fire or electric shock do not remove the housing.
Any servicing other than cleaning and user maintenance should be performed by an authorized service representative only.
Means “DO NOT COVER “.

PARTS DESCRIPTION

Indicator light
Thermostat control switch
Heat select switch
Air outlet grille

Heat setting:

“O” position – OFF
“ ” – FAN
I = WARM AIR (low heat output)
II = WARM AIR (high heat output)

THERMOSTAT

Rotate the switch to choose the suitable setting (“ ”= fan only, no heat/ “I”= low heat output/”II”= high heat output).
Turn the thermostat knob in a clockwise direction to the max position.
Once the room temperature has reached the desired value, turn the thermostat knob slowly in anti-clockwise direction until you hear a “click” sound; this is the setting temperature.
The appliance will automatically maintain the setting temperature. It will switch on when the room temperature is below the setting, and switch off if it is above the setting.
Note: To switch off the appliance, it is recommended to turn the heat switch to fan setting for about 15 seconds to cool down. After that, please turn the heat switch to “O” position and then unplug the appliance.
This can help prolong the lifespan of the appliance.

SAFETY SYSTEM

The appliance has a safety system which automatically switches off the unit when overheated.
If overheating occurs, switch off the appliance, remove the plug from the socket, and let it cool down for at least 30 minutes. Put the plug in the socket and switch on the heater.
This heater is equipped with a tilt protection safety device. For safety reasons, the unit will automatically switch off the power if it is put on unstable or uneven surfaces or if it is tilted accidentally.

MAINTENANCE

The fan heater only needs regular cleaning on the outside.
Before you clean the unit, turn off the switch. Remove the plug from the socket and wait until the fan heater cools down completely.
Use a damp cloth to wipe the heater housing.
Do not use detergents, abrasive cleaning liquids or chemicals (alcohol, gasoline etc.) to clean the appliance.

TECHNICAL DATA

Operating voltage: 220-240V ~ 50/60Hz
Power consumption: 1800W

Recycling – European Directive 2012/19/EU

This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.

ERP information (GB)

Supplier: BAHAG AG Gutenbergstr. 21 68167 Mannheim GERMANY

Declare that the product detailed below:

Information requirements for electric local space heaters

Model identifier(s): 24633886, 24629672

local space heaters only (select one)

|
Nominal heat

output

| Pnom| 1.8| kW| manual heat charge control, with

integrated thermostat

| No
Minimum heat output

(indicative)

output

| Pmax,c| 1.8| kW| electronic heat charge control with room and/or outdoor temperature

feedback

| No
Auxiliary electricity

consumption

output

| elmax| N/A| kW| Type of heat output/room temperature

control (select one)

At minimum heat

output

| elmin| N/A| kW| single stage heat output and no room

temperature control

temperature control

| No
| | | | with mechanic thermostat room

temperature control

| Yes
| | | | with electronic room temperature

control

| No
| | | | electronic room temperature control

plus day timer

| No
| | | | electronic room temperature control

plus week timer

| No
| | | | Other control options (multiple selections

possible)

| | | | room temperature control, with

presence detection

| No
| | | | room temperature control, with open

window detection

Gutenbergstr. 21

68167 Mannheim GERMANY

|

Satisfies the requirement of the Council Directives:

COMMISSION REGULATION (EU) No 2015/1188 of 28 April 2015 and Amending COMMISSION REGULATION (EU) 2016/2282 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for local space heaters

Regarding information for consumers on how to install, use and maintain the product, WEEE information, please check the instruction manual provided with packaging.