SPARKPOD X001PI9585 High Pressure Rain Showerhead User Guide
- June 6, 2024
- SPARKPOD
Table of Contents
6’’ RAIN SHOWER HEAD
INSTALLATION
- Remove the old shower head from the shower arm.
- Clean the threads on the shower arm. There can be some residual thread sealing tape or mineral deposits on the arm, which can be cleaned off using mild soap and water and/or an old toothbrush.
- Wrap the white Teflon tape tightly around the shower pipe evenly for 4 to 5 wraps clockwise.
- Screw the new showerhead onto the end of the shower pipe threads in a clockwise direction. Hand tightens only.
- Turn on the water and check for leaks. If leaks occur, shut off the water and tighten the showerhead further.
CLEANING & MAINTENANCE
- To maintain proper working conditions, cleaning your shower head is required when mineral deposits appear on the spray openings. To clean mineral deposits, gently rub the rubber nozzles on the face of the showerhead to dislodge.
- To clean heavier deposits on your shower head, remove the showerhead and soak face down in 1-2 cups of white vinegar (use white vinegar only) for about 2-3 hours.
- Do not clean or rinse any part with harsh chemicals, heavy-duty cleaners, or abrasives; this may damage the parts or the finish.
SPECS
Function: Rainfall Shower
Material: ABS
Joint: Adjustable Brass Ball
Water Flow: • 1.8 GPM flow restrictor installed
• 2.5 GPM flow restrictor included in the box
Nozzles: Rubber nozzles (touch to clean)
Size: 6″
TROUBLESHOOTING
PROBLEM 1. Leaking at or near the ball joint.
Quick fix: Besides the connection to your shower pipe, there is also a
connection cap between your shower head and the ball joint. Tighten that
connection. Also, make certain the plastic PIVOT SEAT is properly seated
around the ball joint and that the black 0-ring is seated properly.
IF YOU HAVE ANY LEAKS (and before you consider returning the product) SIMPLY FOLLOW THESE STEPS BELOW:
PROBLEM 2. Low water pressure or missing spray patterns.
Quick fix: Clean shower head in vinegar/ water solution (See CLEANING &
MAINTENANCE section) Further: Clean the screened washer.
COLOR MODEL: Chrome/Chrome
IN THE BOX
REINSTALLING THE WATER RESTRICTOR (LOWERS PRESSURE)
WARNING: If you removed your water restrictor but now choose to reinstall it, the high-pressure boosting capability of your shower head will be minimized. The water restrictor reduces your water flow to EPA required maximums. A spare screened washer is included in case of accidental damage.
DISPOSAL: Please do not throw the product away.
Please recycle in consent with the regulations for ABS material.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>