ANGRY AUDIO C3 Headphone Audio Processing Gadget Processor User Guide
- June 9, 2024
- Angry Audio
Table of Contents
ANGRY AUDIO C3 Headphone Audio Processing Gadget Processor
Thanks for purchasing the C3 Headphone Audio Processing Gadget. We are grateful! The user guide is in the queue and should be published in a few months. Meantime, here are some operating notes to help you enjoy your new gadget.
Product Information
C3 Headphone Audio Processing Gadget
The C3 Headphone Audio Processing Gadget is a high-quality audio processing gadget designed to offer a seamless audio experience. The gadget features a Loudness Controller and a Phase Rotator that can be engaged or bypassed via the rear panel DIPswitch. It has balanced +4dBu Stereo XLRF connectors and a balanced +4dBu Stereo RJ45F connector for analog input. The gadget also features transformer-isolated AES/EBU digital input and output with a sampling rate of 44.1kHz to 48kHz. The C3 Headphone Audio Processing Gadget has a power consumption of 10VA and is fanless.
Product Usage Instructions
- Ensure that the gadget is powered off before connecting any cables.
- Connect the gadget to your audio source using the balanced +4dBu Stereo XLRF connectors or the balanced +4dBu Stereo RJ45F connector.
- If you wish to use the Phase Rotator function, engage it by placing DIPswitch A in the up position. To bypass the function, place DIPswitch A in the down position.
- The Loudness Controller can also be engaged by placing DIPswitch A in the up position. To disengage, place DIPswitch A in the down position.
- The gadget also features transformer-isolated AES/EBU digital input and output with a sampling rate of 44.1kHz to 48kHz. Connect these using the RJ45F connector.
- Ensure that the gadget is placed in a well-ventilated area to prevent overheating.
- Use the pocket trimpot adjustment tool included in the box to adjust the gadget to your desired settings.
- If you have any questions or concerns about the gadget, contact the manufacturer at answers@angryaudio.com.
For safety and mounting information, please see the Failsafe Gadget user guide: https://angryaudio.com/wp- content/uploads/2022/08/AA_FailsafeGadgetUserGuide_2208031.pdf
Instructions
- The C3 has an internal power supply, configured at the factory for either 115V or 230V. The captive power cable is fitted with the appropriate plug for the intended region. Do not attempt to modify the plug or the power supply. If your Gadget does not have the proper plug/voltage for your region, contact the factory to arrange a return/replacement.
- C3 is equipped with both analog and digital audio inputs and outputs. Best performance will be achieved using the digital input and output (AES/EBU) on StudioHub+ RJ45 connectors. To select the DIGITAL IN as the audio source, flip DIPswitch B to the up position.
- Analog inputs and outputs are presented on both XLR and StudioHub+ RJ45 connectors. A convenient ANALOG THRU is useful for daisy chaining the same source to multiple devices.
- The Analog Output on the StudioHub+ RJ45 connector also provides ±15VDC to certain types of connected devices. It is possible for example, to feed power and processed audio over a single CAT5 cable from this output to an Angry Audio Headphone Gizmo.
- The front panel controls are straightforward. The headphone amplifier with volume control has both 6.3mm and 3.5mm jacks. The jacks are mutually exclusive. Exercise caution with headphone volume! It is possible to cause permanent hearing damage with excessive volume!
Functions
- The graphic below explains the processing functions.
The C3 Phase Rotator can be engaged or bypassed via the rear panel DIPswitch. Place DIPswitch A in the up position to engage the Loudness Controller. Disengage by placing DIPswitch A in the down position.
Why a Phase Rotator?
For air talent who were Conditioned to listening to themselves off air – back in the days when you could do this. Much of the “processed effect” the talent heard on their voices when listening live off-air likely came from some form of a phase rotator. This could be used to bring back a little bit of those old days.
The phase rotator might also be useful to mitigate a bit of the effect of real-time latency in some facilities. It won’t fix it, but for the talent, it might make the situation easier to work with.
Part Numbers
- North America: 991035
- Australia: 991035A
- Europe: 991035E
- United Kingdom: 991035U
Specifications
- Analog Input: Balanced +4dBu Stereo XLRF connectors
- Balanced +4dBu Stereo RJ45F connector (StudioHub+ pinout)
- Analog Through: Parallel to Analog Input (StudioHub+)
- Analog Output: Balanced +4dBu Stereo XLRM connectors
- Balanced +4dBu Stereo RJ45F connector (StudioHub+ includes ±15VDC)
- Digital Input: Transformer isolated, AES/EBU, RJ45F connector (StudioHub+) ASRC, 44.1kHz to 48kHz sampling rate
- Digital Output: Transformer isolated, AES/EBU, 48kHz S/R, RJ45F connector (StudioHub+)
- Power Input: 115VAC 50/60Hz (North America Version)
- Power Input: 230VAC 50/60Hz (Australia, Europe, United Kingdom Versions)
- Power Consumption: 10VA
- Operating Temperature: 0° to 40° C (32° to 104° F)
- Storage Temperature: -20° to 45° C (-4° to 113° F)
- Relative Humidity: 0% to 90% non-condensing
- Cooling: Venting chassis (fanless)
- Product Dimensions: 8.5 x 6.25 x 1.7 inches (21.6 x 16 x 4.32 cm)
- Product Weight: 3.5 pounds (1.59 kg)
- Shipping Dimensions: 12 x 9 x 6 inches (30.5 x 22.9 x 15.3 cm)
- Shipping Weight: 5 pounds (2.27 kg)
- Included in the box: C3q Processing Gadget, pocket trimpot adjustment tool
That’s it. If you have any questions, give us a shout at: answers@angryaudio.com
Use your new gadget in good health!
Your friends @Angry Audio
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>