AUTEL MaxiBAS BT608 Battery Analysis Tool User Guide
- June 6, 2024
- AUTEL
Table of Contents
MaxiBAS BT608 Battery Analysis Tool
User Guide
Please be advised this tool ships with minimal, non-vehicle-specific software.
To download software to use on the vehicles you service, the tool must be
registered first.
Please follow the following steps:
REGISTER TOOL
|
---|---
• Power on the BT608. Swipe down from the top of the screen and a drop-down
menu will display.
• Long press the WLAN icon to enter the WLAN setting menu.| • Swipe the WLAN
toggle to turn on the Wi-Fi.
• Select your network and enter your password to sign in.
– The Wi-Fi icon will display at the top right corner of the screen when the connection is established.
|
---|---
• After the device is connected to Wi-Fi, access Update
– A dialog box will display asking you to register your tool.
• Tap OK.| – A sign-in screen will display
• Create an Autel ID using an accessible email address
|
• Enter your email address, password and tap Verification code
• Check your email for the verification code, enter the verification code, and
tap Sign up| – The serial number and password fields will be automatically
completed.
• Tap REGISTER
REGISTER TOOL
REGISTRATION VIA A WINDOWS-BASED PC
|
---|---
• Using a computer, launch an Internet browser and go to
http://pro.autel.com
• Click Create Autel ID on the left side of the screen
• If you already have an Autel ID, sign in and skip to Step 6| • Set preferred
language
• Enter your email address as Autel ID
• Click Get Verification Code
| ****
– An email titled “Verification Code for New User Registration” will be sent
to you.
• Open the email and copy the 6-digit verification code
• Return to http://pro.autel.com to continue registration| • Enter
verification code and all other required information marked with a red
asterisk
• Enter Captcha code as shown
• Read the Autel Terms of Use and Privacy Policy and select the check box
|
• Click Create Autel ID at the bottom of the screen
– The Registration Complete screen will display.
• Click Sign in Now and log in| • Select Product Registration from the menu
list
– The Product Registration screen will display.
|
• To locate the tool’s serial number and password: from the Main Menu select
the Setting icon and tap About| • Input your tool’s Product Serial Number and
Password
• Type Captcha code as shown
• Click Submit to complete tablet registration
DOWNLOAD SOFTWARE
|
---|---
– If updates are available, the number of available updates will display above
the
green Update button
• Select the Update button to view a list of available updates.| • Download
the system update by selecting the Download button on the right.
• Download update for each vehicle manufacturer you service
DOWNLOAD BAS FIRMWARE
|
---|---
• Select Settings from the main screen and tap BAS management
• On the Firmware tab page, select Detect Firmware.| – A dialog box will
display when a new firmware version is available.
• Select Get the new version to download the new BAS firmware.
PAIR VCI TO TABLET
PAIR TABLET WITH VCI VIA BLUETOOTH
|
---|---
• Connect the VCI to a vehicle or USB power source
• Select Settings from the main screen and tap VCI manager.| – Your tool will
automatically start scanning for available VCI devices. Found devices
are listed on the bottom of the screen.
• Press your VCI device serial number to pair the tablet with VCI.
– A green Bluetooth icon will display when the tool and VCI are paired.
PAIR VCI TO TABLET
CHECK FOR VCI FIRMWARE
|
---|---
• Connect the VCI to a vehicle and turn the ignition on.
• Select Settings from the main screen and tap VCI manager
• On the Firmware upgrade tab page, select Detect Firmware| – A dialog box
will display when a new firmware version is available.
• Select Get the new version to download the new VCI firmware.
PRINT VIA WINDOWS PC TO WI-FI PRINTER
Works with any printer with a Wi-Fi connection. No need for special software or a driver on the tablet.
|
---|---
• Make sure your Window PC and tablet are on the same Wi-Fi network
• On your computer, go to Autel.com, select Support > Downloads > Autel Update
Tools| • Locate the MaxiSYS PC Suite software and click on the Download
Here button
• Open the zip file
|
• Select MaxiSYS Print, then click the setup.exe file to install the program|
• Within the program dialogue box, check Auto Print to automatically use the
default printer
• Select Quick Print to use the default printer or select Print to choose a
printer
ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>