CONAIR BC200 Hot Air Paddle Brush Styler User Guide
- June 6, 2024
- ConAir
Table of Contents
CONAIR BC200 Hot Air Paddle Brush Styler
Instructions & Styling Guide For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
GET TO KNOW YOUR STYLER
Nylon Bristles guide hair for styling control
GETTING STARTED
No need to dry, section or brush hair before use. Plug styler into outlet.
Slide switch to turn appli-ance ON and OFF.
TO STYLE HAIR
- Place the paddle brush attachment into the hair, close to the roots, and brush through the section.
- For added root lift and volume: Place the brush underneath the hair section close to the roots with the bristles pointing upward. Use your other hand to pull the hair section taut against the silicone paddle until the bristles penetrate through the hair.
- FOR MORE VOLUME: Turn your head upside
FEATURES
- 600W
- High-shine, ionic conditioning
- 2 heat settings, plus cool setting
- Professional power cord
- Heat-activated silicone for added shine
3 TYPES OF BRISTLES
- Nylon guides hair for styling control
- Silicone for added shine
- Detangling for easier drying
THE IONIZING FUNCTION
generates negative ions to:
- neutralize the generally positive charge on flyaway, frizzy hair
- eliminate static electricity
- contribute to shine
NOTE: The unit may produce a clicking sound at times, which is normal for a high output ion generator.
3 HEAT/SPEED SETTINGS
- Low Setting: This position combines ideal airflow and temperature setting for shaping fine, damaged or treated hair.
- High Setting: Combines ideal airflow with higher temperature for styling thick hair.
- Cool Setting: Using the cool setting at the end sets the style for a long-lasting effect.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic
safety precautions should always be taken, including
the following:
READ ALL INSTRUCTIONS BEFORE USING
KEEP AWAY FROM WATER
DANGER – Any appliance is electrically live even when the switch is off.
To reduce the risk of death or injury by electric shock:
- Always unplug appliance immediately after using.
- Do not use while bathing or in a shower.
- Do not place or store appliance where it can fall or be pulled into a tub or sink.
- Do not place in, or drop into water or otherliquids.5.If an appliance falls into water, unplug it immediately. Do not reach into the water.
WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:
- This appliance should never be left unattended when plugged in.
- This appliance should not be used by, on, or near children or individuals with certain disabilities.
- Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped, damaged, or dropped into water. Return the appliance to a Conair Service Center for examination and repair.
- Keep the cord away from heated surfaces. Do not pull, twist, or wrap line cord around appliance, even during storage.
- Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
- Never use while sleeping.
- Never drop or insert any object into any opening or hose.
- Do not use outdoors or operate where aero-sol (spray) products are being used or where oxygen is being administered.
- Do not use an extension cord to operate hot air styler.
- Do not direct hot air toward eyes or other heat-sensitive areas.
- Attachments may be hot during use. Allow them to cool before handling.
- Do not place appliance on any surface while it is operating.
- While using the appliance, keep your hair out of it. Keep your hair away from the air inlets.
- Do not use with a voltage converter.
- This appliance is not a toy. Keep away from children.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
This appliance is intended for household use only. Use on Alternating Current
(60 hertz) only. Standard hot air stylers are designed to operate at 110 to
125 volts AC.
This appliance has a polarized plug (one blade is wider than the other). As a
safety feature, this plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to defeat this safety
feature.
NOTE: Do not use this styling appliance on hair extensions.
CHECK ALCI SAFETY FEATURE EVERY TIME YOU USE APPLIANCE.
This appliance is equipped with an Appliance Leakage Circuit Interrupter
(ALCI), a safety feature that renders it inoperable under some abnormal
conditions, such as immersion in water. To make sure the ALCI is functioning
properly, perform the following test. The purpose of this test is to allow you
to make sure the water sensing system (ALCI) is working.
-
Plug in the appliance and press test button on plug (see diagram).
-
The appliance will stop working. There will be an audible click and reset button will pop out. This indicates the ALCI is functioning properly.
-
To reset ALCI with a reset button, unit should be unplugged. Then push reset button in and reinsert plug into outlet.
-
If ALCI is not functioning properly, return appliance to service center.
-
It is important that if immersion occurs, this unit be brought to a service center. Do not try to reset.
-
Be sure to repeat test every time you use the unit to confirm ALCI is operational.
-
Should the appliance go off and the reset button pop up during use, this could indicate a malfunction in the unit. Remove plug from outlet and allow the appliance to cool. Reinsert plug into outlet.
The appliance should then function normally. If not, return it to an authorized Conair Service Center for evaluation and repair.
IMPORTANT
Never immerse this product in water or any other liquids.
IF YOU MUST USE YOUR HOT AIR STYLER IN THE BATHROOM, INSTALL A GFCI* NOW!
Your local electrician can help you decide which type is best for you – a
portable unit that plugs into the electrical outlet or a permanent unit
installed by your electrician. The National Electrical Code now requires GFCIs
in the bathrooms, garages, and outdoor outlets of all new homes.
WHY DO YOU NEED A GFCI?
Electricity and water don’t mix. If your hot air styler falls in water while
it’s plugged in, the electric shock can kill you… even if the switch is off. A
regular fuse or circuit breaker won’t protect you under these circumstances. A
GFCI offers you far greater protection.
CLEANING & MAINTENANCE
- Unplug the appliance and let cool completely before cleaning it.
- Use a damp cloth to clean carefully. Make sure the appliance is completely dry before using again.
- The rear filter should be cleaned on a regular basis using a soft brush to help prevent buildup and overheating. This will also prolong the motor life.
USER MAINTENANCE
Your hot air styler is virtually maintenance free. No lubrication is needed. For proper operating performance, the hot air styler must be kept clean. When cleaning is needed, unplug the cord, allow to cool and clean dust and lint from air intake openings with a small brush or the brush attachment of a vacuum cleaner. The outer surface of the hot air styler should be wiped clean with a cloth only.
Blocked or clogged air intake vents will cause the hot air styler to overheat. If overheating occurs, an automatic safety device will shut the hot air styler or the heat off to prevent damage or personal injury. If the unit or the heat turns off, unplug the cord and allow the hot air styler to cool for 10 to 15 minutes before restarting. Make sure the air vents are clean.
CAUTION
NEVER allow the power supply cord to be pulled, twisted, or severely bent.
Never wrap the cord tightly around the hot air styler. Damage will occur at
the high flex point of entry into the hot air styler, causing it to rupture
and short. Inspect the cord frequently for damage. Stop use immediately if
damage is visible or unit stops or operates intermittently.
If the cord or hot air styler is damaged or does not operate properly, return
it for repair to an authorized Conair service representative only. No repairs
should be attempted by the consumer.
STORAGE – IMPORTANT
When not in use, your hot air styler should be disconnected, allowed to cool
and stored in a safe, dry location, out of reach of children. Do not wrap line
cord around hot air styler. Allow the cord to hang or lie loose and straight
at the point of entry into the hot air styler.
LIMITED TWO-YEAR WARRANTY
(U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your unit free of charge for 24
months from the date of purchase if the appliance is defective in workmanship
or materials. To obtain service under this warranty, return the defective
product to the service center listed, together with your purchase receipt and
$7.50 for postage and handling. California residents need only provide proof
of purchase and should call 1-800-3-CONAIR for shipping instructions. In the
absence of a purchase receipt, the warranty period shall be 2 years from the
date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED IN DURATION TO THE
24-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitations
may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR
IMPLIED, WHATSOEVER.
Some states do not allow the exclusion or limitation of special, incidental,
or consequential damages, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other
rights, which vary from state to state.
BEAUTY TIPS:
To achieve the looks you love and for more great InfinitiPRO by Conair®
products visit: infiniti.conair.com
Please register this product at:
www.conair.com/registration
Service Center
Conair Corporation Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
For information on any Conair or InfinitiPRO by Conair product, call
1-800-3-CONAIR or visit us on the web at:
www.conair.com/infiniti
©2017 Conair Corporation
150 Milford Road, East Windsor, NJ 08520
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>