AJAX MotionProtect 9NA Wireless Motion Detector User Guide
- June 6, 2024
- ajax
Table of Contents
AJAX MotionProtect 9NA Wireless Motion Detector
Quick Start Guide
Before using the device, we strongly recommend reviewing the User Manual on
the website. Product name: Motion detector MotionProtect is a wireless motion
detector. MotionProtect detects motion at a distance of up to 39 ft and
features pet immunity.
| Sensor | PIR sensor |
|---|---|
| Motion detection distance | Up to 39 ft |
| Motion detector viewing angles (H/V) | 88.5° / 80° |
| Frequency range | 902-928 MHz FHSS |
(complies with part 15 of the FCC rules)
Pet immunity feature| Yes, height up to 20″,
weight up to 44 lbs
Tamper protection| Yes
Maximum RF output power| 7.52 mW (limit 20 mW)
Radio signal range| Up to 5,570 ft (in a line of sight)
Battery supply| 1 battery CR123A, 3 V
Battery life| Up to 5 years
Operating temperature range| From 14 to 104 °F
Operating humidity| Up to 75%
Dimesions| 4.3 х 2.6 x 2 ″
Weight| 3 oz
Complete Set: 1. StreetSiren; 2. SmartBracket mounting panel; 3. Battery CR123A (pre-installed) – 4 pcs; 4. Installation kit; 5. Quick Start Guide
FCC WARNING STATEMENT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turn-ing the equipment off and on, the user is encouraged to try to cor-rect the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Warranty: The warranty for Ajax devices is valid for two years after the
purchase date and does not apply to the supplied accumulator. If the device
does not work correctly, you should first contact the support service—in half
of the cases, technical issues can be solved remotely! This device is
typically used at a distance of 20 cm or more from the user.
FCC compliance information
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer may void the user’s
authority to operate the equipment under FCC rules.