Sage Human Electronics BT09S Car Wireless Receiver User Manual

June 6, 2024
Sage Human Electronics

sage logo

Sage Human Electronics BT09S Car Wireless Receiver

Introduction

Thanks for choosing cur mini Wireless receiver.
This device allows you to hear the phone music and call not just frnm car audio system, but also from home speaker.Once two parts hooked up and plugged into car cigarette lighter, its dragging will start au1omatically. Fully charged 3 hours, it will provide upto 30 hours of music playing time or 15 hours of talking time. To have a better experience, please read this instruction carefully.

Packing Contents

package content

Appearance

Operation Instructions

Using the music playing function:

  1. Plug the Mini Wireless receiver 3.5mm male jack into the auxiliary port of your vehicle’s audio system or home speaker.operating instruction 1
  2. Long press MFB for 3 seconds, the LED light starts to flash and prompts “PoWEr on” to enter the pairing mode.operating instruction 2
  3. Tum on your BT enabled devices and search new device named “BT09S”, then pair with this unit .operating instruction 3
  4. Turn on your music then you can en1oy the crystal audio sounds.
  5. Press MFB once to Play/Pause if you need it.

Using the hands free function:

  1. Press M FB once to Answer/Hang off the phone call when there is incoming call.
  2. Press M FB and hold 2 seconds to reject the phone call.
  3. Press M FB twice to redial the last phone call.
  4. Press M FB and hold 2 seconds du ring conversation so as to hear the call wt h the BT095 orthe Phone.

Voice assistant

1. Long press MFB 25 to wake up Siri/Google Assislllnt with 2 beeps
2. After using the voice assistant, click or wait for 3S to exit.

Features

  1. Mini Wireless Receiver with music streaming and hands-free function.
  2. With built-in microphone, echo and noise-canceling technology supply high-quality call communication.
  3. Not just let you enjoy the crystal sounds but also long wireless working distance and low power consumption.
  4. Insert the 3.5mm audio head into the USB adapter to charge or use the charging cable to charge through the Type-C interface.
  5. Built-ln:ioornAh battery pro-.fdes up to 30 hour work in time.
  6. With 5.4A 30W dual USB car charger to charge other devices.
  7. Compa1ible with most wireless-enabled devices like smartphones, tablets or MP3.
  8. Adjust the volume+/ -. switch the previous/ next mu.sit;;:.
  9. With a key1o clear the wireless pairing list function.
  10. Protection for over-circuit/voltage, overheat, short circuit.

Specifications

Wireless Version: VS.1
wireless ID: BT09S
Wireless Frequency range: 2A-2.48GHz
Wireless Distance: about 10 Meters (open area)
Battery Capacity: 300mAh 3.7V
Charging time:about3 hours
Talking time: about ]5 hours
Music playing time: about 30 hours
Standby time: auto poWEr-off 10 minutes after
disconnected
Size:34.4″34_4•99 mm
Audio Jack: 3.5mm aux male jack
Product weight: 54. Sg
Material: aluminum alloy+ABSshell

Compatibility
This device can be paired as hands-free kit with any compatible BT enabled devices. Each time can only connected with one BT device.

Precautions:
Please read all safety instruction warnings carefully before using this product. Improper use of t1is product may result in da11age to this or attached products. To ensure the prod Lets work well, please never use this in the following conditions:

  1. Moisture underwater conditions.
  2. Conditions near heater or high-temperature service.
  3. Conditions with direct and strong sunshine.
  4. Conditions with apt railing.
  5. Never dismantle the product without due. permission, otherwise it may nullify the warranty clause.
    Charging the mini Wireless receiver

When the battery power is low, the relative prompt will appear and its status will also display on your phone.

lt starts the charging when two parts hooked, plug the USB adapter to charging port, and it will be fully charged within 3 hours.

Cautious: This device can’t work while charging.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates use, and can radiate radio frequency energy and, if not installed and used in ac:cordance with the instructions, may cause harmful interference to radio communications. However, there is no guarartee that interference will not occur In a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged
to try to correct the interference by one or more
of the following measures:

  • Reorient ‘” relocate the receiving antenna .
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV tedlnician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

  1. this device may not cause harmful interference. and
  2. this deviCE must accept any interference received, including interference that may cause undesired operation.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2 )this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals