InfiRay P200 Xview Infrared Thermometer Instruction Manual
- June 6, 2024
- InfiRay
Table of Contents
InfiRay P200 Xview Infrared Thermometer
Components
Home Interface
Functions
Switch On/Off
The camera will be switched on by pressing the Power Button for 4 seconds in
the condition of camera off, then infrared image will be generated. The camera
will be switched off by pressing the Power Button for 4 seconds in the
condition of camera on.
Switching Functions
Short Press Up/Down button to switch various functions circularly. An enlarged
function icon in white colour can be seen from display after function
switching. Short press Power button to activate the selected function, the
function icon will turn red. Short press Power button again can return to main
menu and close the selected function.
Video Recording.
In video recording mode, short press Up button to start recording, then
video recording timer appears at the left bottom of display, short press Down
button to stop recording.
While recording, timer appears on the left bottom. Photography
In the photography mode, short press the Up/Down button to take a photo.
Color Palette
In the color palette mode, short press Up/Down button to switch the image mode
among White Hot, Black Hot, Iron Red, Lava, Rainbow, Iron Grey, Red Hot and
Rainbow 2 circularly. Press Up/Down button to switch among 8 types of palette
modes, press Power button to save and exit. The 8 types of palette modes, from
left to right, are: White Hot, Black Hot, Iron Red, Lava, Rainbow, Iron Grey,
Red Hot and Rainbow 2.
File Management
In file management mode, press Up/Down button to read photos and videos.
Short press Power button to select a photo or video, then short press Up
button can delete a photo or video, short press Down button can play the
video.When the video is playing, short press Down button to Pause/Continue
playing, press Power button to close video and back to file management mode.
Temp. Measurement Setting
Temp measurement switch, unit, ambient temperature, emissivity, distance and
temp measurement range can be set or read in temp measurement setting mode.
- Short press Up/Down button to switch setting menu item.
- Then short press Power button to select menu item and set parameters by short pressing Up/Down button.
- Short press Power button to save and exit .
System Setting
Date/Time, Format SD card, USB, WiFi and product info can be read and set in
system setting mode.
- Short press Up/Down button to switch setting menu item.
- Then short press Power button to select menu item and set parameters by short pressing Up/Down button.
- Short press Power button to save and exit .
Connect to PC
Connect camera to PC via Type-C cable, then ‘Disk’ and ‘Charge’ options can be
seen from display.
- When ‘Disk’ is selected, the camera will be loaded as a removable disk on PC, the photos and videos can be read from this disk. Video reading path: Disk\VIDEO-CIF I .mp4; Photo reading path: Disk\PHOTO-CIF \ .jpg
Selecting ‘Charge’ can charge camera. Specification
- Product Name: Xview Infrared Thermometer
- Resolution, pixels: 256×192
- NEDT, mk: <60
- Frame Rate, Hz: 25
- Measure Range, °C : 20~+ 120 (available extension -20~+400)
- Measure Accuracy: ±3°C or 3% (in extension)
- uvc: Support
- WiFi : Support
- Storage : Build-in storage (Flash), optional TF Card, maximum 64GB
- Dimension, mm : 123x61x35
- Weight, g : :,,200
- IOport : Type-C
FCC STATEMENT
Labeling Requirements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Information to user
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Information to the user
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Body Operation
This device was tested for typical body-support operations. To comply with RF exposure requirements, a minimum separation distance of 0.5cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>