Dongguan Hying Digital Technology HY106 Gaming Speaker Instruction Manual
- June 6, 2024
- Dongguan Hying Digital Technology
Table of Contents
HY106
Instruction Manual
Thank you for purchasing your new gaming sound bar system. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. Read all the safety instructions carefully before use and keep this instruction manual for future reference.
Brief introduction
- Bluetooth chip V5.0 with a working distance over 10 meters,
- Supports Bluetooth and AUX-in playing back.
- Built-in EQ sound processing.
- Optical projector + RGB/7-color lighting
- Built-in lithium battery, long playing hours.
Interface function
- power port: Type-C USB charge 5V
- AUX-IN jack
- Earphone jack
Key functions/operations
- Power/Mode : Keep pressing it over 2 seconds to power on or standby the unit. single press it for mode shifting between Bluetooth and AUX-in.
- Lamp: press it to power on the projector lamp and RGB lightings
- Vol-: press it to decrease sound volume.
- Vol+: press it to increase sound volume
Operations
4.1 AUX-IN: playing mode: Long press the Power/Mode key to power on the unit, it implys AUX-in playing mode. (connect to external BT device)
- Single press to the Power/Mode key, shift to Bluetooth connection mode while a sound indicator will be followed. then the unit will be waiting for Bluetooth pairing. ( it will auto-connect to the latest paired device), once paired successfully, the blue lights will flash.
- Power on the mobile phone or other BT devices, and search for “HY106 ”, press it to connect, and input the Bluetooth pin “0000” if needed, a BT indicator will be played after the connection is complete. while the projector lighting will keep waving.
- If Bluetooth connection interrupted or need new connection with other BT device, just press both Vol- and Vol+ keys for a Bluetooth re-pairing.
4.3 while the battery got low power, a sound indicator will be reminded, the
apparatus would be power-off once no power with battery. during charging, the
charging light will shine unitll power be fully charged.
if the apparatus keeps no use for a long time, recommand you to charge once a
season at least for a longer battery life. it’s better to power off the unit
during charging.
Main Paramter
Input: AUX, Bluetooth
BT solution: V5.0
BT working range: >=10M
Charging voltage:DC5V 1A/2A
Li-ion battery: 3.7V 2200mAh
Output power:5W
Frequency reponse: 100-20KHz
Seperation:>-40dB
S/N ratio:>-75dB
Driver impedance: 4hom
Controls: Keys
Accessories:
audio input cable: 1pc
Charging cable: 1pc (Type C)
User manual: 1pc
WARNING
- make sure to use it under the rated voltage DC 5V
- Whilele a strong signal input. don’t set volume to the maximum to limit distrotion.
- To reduce the risk of fire or product damage, do not expose this unit to rain, moisture, dripping, or splashing. keep the unit in a ventilated and dry place.
- Only use dry cloths for cleaning the units, If you spill any liquid into the unit, it can be cause serious damage. Switch it off at the mains immediately. Withdraw the USB plug and consult your dealer.
- Do not open any fixed covers as this may expose dangerous voltages. please leave all maintenance work to qualified personnel or contact our after-sale service.
- Please use it under a temperature range: 0℃~45℃ and humidity range: 30~70%RH
FCC warning:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>