Dongguan Hying Digital Technology HY-L03 Hub Wireless Charging RGB Gaming Mouse Pad Instruction Manual
- June 4, 2024
- Dongguan Hying Digital Technology
Table of Contents
Dongguan Hying Digital Technology HY-L03 Hub Wireless Charging RGB Gaming
Mouse Pad
Product introduction
- HUB USB2.0 extension*4
- Wireless charging
- Touch button control
- 10 RGB lighting modes (with memory function):
- Rainbow light mode 1 (Red, Green, Blue, Purple, Green, Yellow, White)
- Monochromatic breathing light mode (red, green, blue, purple, green, yellow, white)
- Rainbow light mode 2 (Red, Green, Blue, Purple, Green, Yellow, White)
- Monochrome light mode(4.Red、5.Green、6.Blue、7.Purple、8.Green、9.Yellow、 10.White
- Dimensions (LWH): 80304mm
- USB data cable: 1.8m (recommended to be inserted into the computer USB3.0 [blue] interface)
Interface function
- a. TYPE-C USB 2.0 data transmission
- b. USB 2.0 data transmission
- c. Touch the button
- d. Charging indicator
- e. Wireless charging location
Note:
Not suitable for use with extended mobile hard disks(compatible with USB flash
drive, mouse, keyboard and other devices plug and play connection)
Button function
Touch the key to switch or turn on the RGB light mode, touch (3 seconds) to turn off the RGB light.
Wireless charging
Standby: the blue indicator light is on,
charging: the red indicator light is on (compatible with most wireless
charging mobile phones on the market). If the charging indicator light flashes
red and blue alternately, it indicates that there is a metal foreign body in
the charging position. After the foreign body is removed (3 seconds), the blue
light indicates that it can be charged normally.
Product technical parameters
- Power supply: DC 5V2A
- Output power: 5W
- Working temperature: 0°C~45°C
Precautions
-
This product must be used at rated voltage.
-
Do not leave this product in a high temperature and humid environment, please place it in a dry place.
-
During maintenance, please wipe the product with a dry cloth. It cannot be cleaned with water, alcohol, gasoline, or acid-alkaline detergent. if not
If metal objects or liquids are spilled into the product, cut off the power immediately and use it only after inspection by professionals. -
This product cannot be disassembled at will. If you need to repair it, please contact our after-sales customer service.
-
This product is for indoor use only, it is recommended to use it within the ambient temperature range: 0°C~45°C; humidity range: 30~70%RH.
FCC Warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>