tc electronic 435988 Drip Spring Reverb User Guide
- June 6, 2024
- tc electronic
Table of Contents
tc electronic 435988 Drip Spring Reverb
Quick Start Guide
Controls
- Input/Output jacks – Connect a 1/4″ cable from your guitar to the INPUT jack, and connect a cable from the OUTPUT jack to your amplifier.
- 9 V DC – Connect a 9 V power supply (not included).
- Footswitch – Turns the effect on and off. The LED will light when the pedal is engaged. The pedal operates in true bypass when disengaged.
- DWELL – Sets the decay length of the reverb.
- MIX – Adjusts how much reverb is mixed with the dry signal.
- TONE – Adjusts the brightness of the reverb.
Battery Replacement
Storage
Specification
Connectors
- Input 1/4″ TS, unbalanced
- Impedance 470 kΩ
- Output 1/4″ TS, unbalanced
- Impedance 1 kΩ
- Power input Standard 9 V DC, center negative, >100 mA (not included)
- Battery option Internal 9 V battery connector
- Current consumption 90 mA
Physical
- Dimensions (H x W x D) 58 x 74 x 132 mm (2.3 x 2.9 x 5.2″)
- Weight 0.5 kg (1.1 lbs)
Legal Disclaimer
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information
regarding Music Tribe’s Limited Warranty, please see complete details online
at musictribe.com/warranty.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
- Responsible Party Name: Music Tribe Commercial NV Inc.
- Address: 5270 Procyon Street,
- Las Vegas NV 89118, United States
- Phone Number: +1 702 800 8290
DRIP SRING REVERB
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music
Tribe can void the user’s authority to use the equipment.
Hereby, Music Tribe declares that this product is in compliance with Directive
2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive
2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>