Zhejiang Meka Electric 100022465 Smart Light Bulb User Guide
- June 6, 2024
- Zhejiang Meka Electric
Table of Contents
Zhejiang Meka Electric 100022465 Smart Light Bulb
Way two: Auto scan
Enter Wi-Fi password, then connect Make your router, mobile, and device are as close as possible.
Product description
- the smart light bulb could be adjusted the light from i,warm white to cool white by connecting with an app. t is also available to change colors and be
- ompatible with Google/Alexa/Siri to build your
- mart home
The specs
- 75W equivalent (12W)LED White light 1050 Lumens (2700K) 15,000-hour life
- WiFi:IEEE 802.11 N, 2.4GHz 110-130V AC, 60Hz
what you need to get started?
- Stable Wi-Fi network which could access to the evice
- Know your Wi-Fi network and password
- Make sure your cellphone is running iOS®B or higher or Android4.1x or higher
- Make sure you’re connecting to a 2.4GHz Wi-Fi network(lt can’t connect to 5GHz networks)
- Find an existing light socket(E26 shape)
Installation the bulb
lease turn off the power supply before installation, install the bulb, switch
on the power and check if the
bulb is flashing in while if the bulb is not flashing. turn on and off the
bulb three consecutive times(on for 1-2 seconds and off for 1-2 seconds),if
the bulb is ashing in white when turning on for the fourth time, t is ready
for network configuration.
auction: RISK OF ELECTRIC SHOCK – DO NOT SE WHERE DIRECTLY EXPOSED TO WATER
not install the device with wet hands or When landing on wet or damp
surfaces.Not for use in otally enclosed luminaires.Do not use with dimmers.
Download Smart Life App
Scan the QR code below to download the Smart Life app or download the Smart Life from APP Store or Google Play Register a Smart life account and sign in the app Open the Smart Life app, tap “Register” to register an account, then sign in to the app. Add device and change device’s name Sign in with the Smart Life account, add the device, as the right picture shows Before connecting, turn on the Bluetooth of your cellphone. The first time connecting, the light needs to be set to flash rapidly. Turn on the power 3 times ( on-off-on-off- on) ,confirm light bulb is now rapidly flashing (2 times per second) Add the lamp, there are two ways to connect With the lamp one is Add manually, the other is to Auto scan.
Way one: Add manually
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection
against hannful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: Reorient or
relocate the receiving antenna. lncrease the separation between the equipment
and receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.Consult the dealer or an experienced
radiofTV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm betweer the radiator & your body.
RF Exposure: A distance of 20cm shall be maintained between the antenna and
users, and the transmitter module may not be co-located with any other
transmitter or antenna.
Non-modification Statement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the uses authority to operate this equipment.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules Operation is subject to the
following two conditions: