Zhejiang Meka Electric MK020011002119 LED Lamp User Guide
- June 6, 2024
- Zhejiang Meka Electric
Table of Contents
Zhejiang Meka Electric
MK020011002119 LED Lamp
User Guide
-
Download Smart Life App
Scan the QR right code to download the Smart Life app. -
Register a Smart life account and sign in to the app
Open the Smart Life app, tap “Register” to register an account, then sign in to the app.（picture 1）
http://smartapp.tuya.com/smartlife -
Add device and create connection.
Make your router, cellphone, and device are as close as possible. Before connecting, enable Bluetooth of the cellphone.
Turn on the bulb 3 times(on-off-on-off-on), confirm the light bulb is flickering rapidly. (2 times per second).
Sign in to the Smart Life account, The device will be found by the app automatically.
Add the device, Select a 2.4GHz Wi-Fi network, and enter a password.
Start connecting, Add successfully.
Follow pictures 2-6 to create the connection of the device.
After the connection is finished, the device can be checked on the home page of the app.
The connection can be also created by the auto scan. In this way, please select a lighting-lighting source (BLE+Wi-Fi), they operate according to the app instructions. -
Control the bulb
You can control the brightness in the Dimmer model. Change scene in scene mode. -
The specs
• 60W equivalent（10W)LED White light
• 800 Lumens (6500K)
• 15,000-hour life
• WiFi: IEEE 802.11N, 2.4GHz
• 110-130V AC，60Hz
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
RF Exposure: A distance of 20cm shall be maintained between the antenna and
users, and the transmitter module may not be co-located with any other
transmitter or antenna.
Non – modification Statement
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOT FOR EMERGENCY LIGHTING
“ONLY USE THE CONTROL PROVIDED WITH OR SPECIFIED BY THESE INSTRUCTIONS TO
CONTROL THIS LAMP. THIS LAMP WILL NOT OPERATE PROPERLY WHEN CONNECTED TO A
STANDARD (INCANDESCENT)DIMMER OR DIMMING CONTROL.”