Ulike CB02 Sonic Electric Toothbrush User Manual
- June 6, 2024
- Ulike
Table of Contents
CB02 Sonic Electric Toothbrush
User Manual
THANKS FOR CHOOSING US
According to manufacture high quality&stylish electric toothbrushes, we guide customers to a positive attitude for dental care. Let customers keep away from oral health problems.
- Smart reminder-Develop a good habit to brush the tooth
- IPX7 waterproof-convenient to use&clear up
- Ultrasonic-high efficiency&reduce bleeding blood
- DuPont Bristle-Worldwide Brand, safety to use
- Long term using-whiten your teeth&clear up blind angles
- Stick to use keep you away from oral health problems& have a perfect smile
We aim at the thing that customers are easy to enjoy the excellent experience of brushing tooth! Our electric toothbrush is effective for removal teeth, tea, cigarette stain, as well as yellow teeth, black teeth, and relief of sore gums.lt can also help to improve oral health for people to correct teeth. Reading carefully before using it.
*Environmentally-friendly
When giving up using an electric toothbrush, please transfer it to a recycling collection point. Because there is a battery inside of the product, taking out the battery when thrown away will be harmful to the environment. You can also ask for help from after-service stuff when you do not know how to get the battery out, they will help to solve it in an environmentally-friendly way.
*Danger
- Do not put the charging dock in water or any liquid. the lf the charging dock is already fall off the water, switch it off before taking it out from the water. To ensure it is totally dry before next use.
- Do not recharge, use and store beside the area of fire and high-temperature atmosphere.
- Do not recharge near to the strong magnetic field.
*Caution
- Check if the voltage of the product adapts to your local voltage before recharging it.
- One set includes replacements like a charging dock, handle, and USB line. Any part breaks down, replace it to avoid dangers. (only replace it by assorted replacements from us)Giving it away when it can not replace.
- Do not put the product in place children&infant child can reach. Do not play it as a play toy
- Please ask your doctor before using it if you have an operation in 2 months.
- Do not use it for another purpose except for oral health care
- Clearing up brush heads after using when your toothpaste with hydrogen peroxide, bicarbonate, and bicarbonate.
- Do not use it when taking shower. Turn it off when not using it to avoid fire dangers.
USER MANUAL
*Following below for the first time
- Aligning toothbrush heads with handle.
- Pushing toothbrush heads to handle
- Putting charging dock on safe, balanced, dry and shade place
- Turning on charging dock
- Putting a handle on the recharging dock, the indicator light on.
*Warm tips
Do not throw it away when running out its life, because there is a battery
that will be harmful to the environment. Put it to the recycling collection
point and ensure all energy is running out.
SPECIFICATION
FITTING
| Handle | Toothbrush head | Charging dock |
|---|---|---|
| 1 | 1 | 1 |
FAULT IAGNOSIS
SITUATION
| REASONS|
SOLUTION
---|---|---
Vibration reduction| Stronger push on tooth Too close between handle&brush
head| Put brush heads on tooth lightly
Leave out a gap between brush head&hand Put handle straight on charging dock
and ensure the indicator light on
Short battery life after full charging| no energy in when charging
battery low
Toothbrush heads break down| Charging time is not enough
Not use for 6 months| recharging it Exchange battery from after-service stuffs
CHARGING BATTERY
- Running out all the energy for the first time to use. Recharging it for next time. Running out all energy for every month to protect the battery life.
- Recharging for 6-8h after 6-months no use
- Putting a handle on the charging dock&ensure indicator light on
- Long time no recharging, the indicator light will on after about 6-10min.
*Normal charging-red indicator
* full charging-green indicator
** *battery low-yellow indicator
CAUTION
- do not charge it in the bathroom do not put the charging dock beside water or bath tuns.
- do not break off products or rechange battery, if need change battery, ask for help from staff.
- do not change the USB charging line&charging dock, send it to the after-service department if needed.
MAINTENANCE
| CLEARING
Clearing brush head after using and drying it by air
Do not draw brush to avoid falling brush
---|---
|
CLEARING BODY
Clear body by soft cloth
Do not put it in the water
Do not clear it by 40 C above water or acid solvent
|
CLEARING CHARGING DOCK
Sweep dirty away from the dock
Switch off before clearing dock to avoid electric shock
Sweep it by soft cloth to avoid short circuit
|
REPLACE BRUSH HEAD
*replace brush head for 3 months as dentist suggests
5 MODES
3S000vpm/min combine to wide toothbrush head wil make deep and excellent clearing results
FUNCTION DESCRIPTION
- 5 modes: clean, white, sensitive, massage, and gum care.
- different modes:clear >whit> sensitive> massage > gum care>stop,each mode have 8s timer-remainder
- function button sequence: clear >whit> sensitive> massage > gum care>stop
MODES
In any mode, it will pause for 0.3s to remind you to brush the next area.
The total brushing time will be 2 mins.
TIME
- Brushing tooth for 2min as dentist suggest
- The device will remind the user to change the brushing area every 30 seconds.
- The device will record the mode after every single-use
STEP 1
Running out all power of the toothbrush for the first time, then recharging it
for 6 hours. 
STEP 2
Fixing replacement head on toothbrush handle, 1 mm-2mm gap between brush head
and handle is normal performance. 
STEP 3
Squeezing toothpaste on the toothbrush
STEP 4
Putting toothbrush head-on between tooth and gums
STEP 5
Turning the device on and clearing up. 
STEP 6
Turning off before taking out toothbrush heads. 
STEP 7
Washing toothbrush by running water, shaking off water or wiping handle with a
soft cloth. 
STEP 8
Putting toothbrush on charging dock
FCC Statement
This device complies with part 18 of the FCC Rules. Operation is Subject To
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not explicitly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Note: this equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 18 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and candidate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. -
Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device, a distance of 15 cm
surrounding the device and 20 cm above the top surface of the device must be
respected.
This device complies with Part 18 of the FCC Rules. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Increase the separation between the equipment and any other radio device.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>