Ulike UI04CJP Laser Hair Removal for Women User Guide
- May 15, 2024
- Ulike
Table of Contents
QUICK START GUIDE
IPL Hair Removal Device90-Day Hassle-Free Return
2-Year Warranty
amazonsupport@ulike.com
Air Series
Button/Icon Indicators
How to Use
| Step 1
Apply the hair removal device 6 to 12 hours after shaving
- Please do not apply the scraper blade directly to the skin. Use with lather or shave in the shower. The blade is sharp. Use it carefully to avoid scratches
---|---
| Step 2
Connect the power cord to the adapter After connecting the power cord to the product’s power input connector, insert the plug into a power outlet - After finishing hair removal, make sure to turn off the power before unplugging the power cord to prevent damage to the power supply
| Step 3
Wear protective glasses before hair removal to protect your eyes - Do not look directly at the flashing light while operating the hair removal device
| Step 4
Press the On/Off Button on the side of the hair removal device for a short time to turn it on, and then choose the appropriate treatment level - Level is recommended when using the hair removal device for the first time. You can switch gradually to other levels as you find them tolerable. The higher the level, the more energy is applied, and the faster the effect
| Step 5
Place the lamp cap against the skin and press the Flashing Button to start hair removal - It is recommended to flash each treatment area twice to achieve a better hair removal effect
| Step 6
After finishing hair removal, long press the On/Off Button to turn the machine off - After finishing hair removal, make sure to turn off the power before unplugging the power cord to prevent damage to the power supply
Model Introduction
Models
Energy of Level 1 to Level 2
Suitable for sensitive areas such as lips and private parts/ people with
darker skin tone/ people with sensitive skin, etc| Energy of Level 3 to Level
4
Suitable for main body parts of people with medium or lower hair roughness and
thickness, such as arms, legs, etc| Energy of Level 5
Suitable for main body parts of people with thick hair, such as arms, legs,
etc
-
Continuous Flash (suitable for large areas such as arms and legs)
1. Press the Flashing Window against the skin, after which the Hair Removal Sensor Light will turn on, indicating full access
2. Long press the Flashing Button, after which the Sequence Flashing Indicator Light will turn on, indicating that it has entered Continuous Flash mode
3. After the flashing completes, move the Flashing Window to the next area and use Continuous Flash model to continue hair removal* Flash twice over the area requiring removal to ensure it is covered -
Single Flash (suitable for small areas such as fingers and lip hair)
1. Press the Flashing Window against the skin, after which the Hair Removal Sensor Light will turn on, indicating full access
2. Short press the Flashing Button to start flashing
3. After flashing completes, move the Flashing Window to next area and repeat the above operation * if your feel excessive heat on the skin during the process of hair removal, suspend the operation for about 10s to allow the Flashing Window to cool down again before hair removal -
Irradiation intensity setting
The product has five gears of energy adjustment, which can meet the needs of different skin sensitivity and different hair colors. The following are the recommended instructions:
● Please refer to the table below to select the energy gear suitable for your skin nature and hair color
(Note: NO is the item not application)
- If you feel pain or discomfort during use, please lower the energy gear (if you feel warm or slight burning without pain, it is normal)
- People with darker skin are prone to skin allergies, so it is recommended to use it with a lower energy gear
- For people with thick hair, it is recommended to use a higher energy gear (Gear 4 or 5); For people with little hair, it is recommended to use the lower gear (Gear 1, 2 or 3). The specific situation varies from person to person, but for the first time, Please use it from Gear 1.
Tips on How to Use The Hair Removal Device
Q1: Why should I shave off the hair first?
A: Because the hair removal device acts on the melanin in the hair follicle,
not on the hair on the surface of the skin. Shaving the hair on the surface of
the skin first is to help remove the obstacle on the surface, so that the
pulsed light energy can be applied to the hair follicle to the maximum extent,
rather than being absorbed by the hair on the surface
Q2: How should I use Sapphire (the Flashing Window) to achieve the best
results during hair removal?
A: Because the continuous flashes of the hair removal device will accumulate
energy over time, it is recommended to apply ice on the lighted skin area for
about 30s after hair removal in one area to maximize the effectiveness of the
ice compress, and then perform the hair removal operation in the next area.
This cools the skin with ice while allowing for a better cooling effect
Q3: Why should the Flashing Window be completely fitted to the skin during
hair removal?
A: When using the hair removal device, the lamp head should be pressed against
the skin to create full contact with the hair follicle, whieh ensures that the
hair follicle absorbs higher energy and achieves better hair removal. At the
same time, when Sapphire (the Flashing Window) contacts the skin, it can pre-
cool your epidermis, which reduces its heat and better protects your skin
Q4: Can I apply skincare products before hair removal?
A: When using the hair removal device, please make sure to keep your hair
removal area dry. If you want to use a moisturizing product, the device can be
used normally after the moisturizer is absorbed
Q5: How often should I use the product?
A: Use three times every week for the first 2 weeks. Use twice every week for
the third to fifth weeks. Use once every half a month or month from the fifth
week onward
- Use according to the growth cycle of your hair. The level as well as the frequency of use can be appropriately increased for thick hair
Q6: Why does the Flashing Window sometimes not work?
A: For your safety, the Flashing Window will not work when it is not against the skin. Make sure to apply the Flashing Window perpen- dicularly against the skin. It will work normally when the sensor light is white
Q7: Which level should I choose?
A: Level 1 is recommended when using this hair removal device for the first time. You can gradually switch to higher levels as your tolerance increases The higher the level, the better the effect.
90-Day Hassle-Free Return
2-Year Warranty
amazonsupport@ulike.com