automatic TECHNOLOGY GDO-11 Ero Sectional Door Opener User Guide

automatic TECHNOLOGY GDO-11 Ero Sectional Door Opener

User Operating Controls

pressed.
03| For storing or erasing remote control button code to switch the courtesy light on or off.
04| Illuminates when Service is due.
05| Flashes as the door opens and remains on when opened.
06| Flashes as the door closes and remains on when closed.
07| Is used during installation. Used to re-intialise the opener.

Manual Door Operation

It is recommended to do so with the door in the closed position. To Disengage the Opener:

1. Pull the manual release cord towards the door, until you hear a click.
2.  Move the door manually.
   CAUTION: When the opener is manually disengaged, the door is no longer locked. To lock the door manually, re-engage the opener after the door is closed.

To Re-Engage the Opener:

1.  Check the door has not been locked by a locking device.
2.  Pull the manual release cord away from the door, until you hear a click.
3.  The door will now operate from the opener.
   CAUTION: Do not use the string handle as a mechanism to open the door. Failure to comply may cause serious injury.

Coding a Remote Control

Storing the Remote Control Code

The opener can only be operated from remote controllers that have been programmed into its memory. Up to 8 remotes can be stored in the memory.

1. Press and hold the DOOR CODE button.
2.  Press Button 1 on the remote controller for two seconds.  Release and pause for two seconds. Press Button 1 again for two seconds.
3.  Release the DOOR CODE button. The remote control button is now coded, press to test.

Battery Replacement Battery Type: 1 x CR2032

1. To test the battery is working, press and hold a remote button. Check the Light Status table to determine if the battery needs replacing.
   Light Status| Battery Status
   ---|---
   Solid| OK
   Flashing| Replace
   No light| Replace
2. Use fingernails to separate the remote casing to expose the circuit board.
3. Use a non-metallic object to push the battery down through the side opening to remove the battery.
   WARNING! The battery is hazardous and must be kept out of reach of children. The battery can cause severe or fatal injuries within 2 hours or less if swallowed or placed inside any part of the body.If you suspect the battery has been swallowed or placed inside any part of the body, SEEK IMMEDIATE medical attention.

Smart Phone Control (Requires Smart Hub)

Connecting to WiFi

The Smart Phone Control works via your home’s WiFi network. Initial setup involves linking your phone app, smart hub, and opener to your home network.

1. Download the ATA App.
2.  Ensure the WiFi router is within range of the Smart hub.
3.  Connect the Smart Hub to power.
4.  Go to phone settings, then WiFi, and select (ATA000000).
5.  Open App and tap on Start.
6.  Select setup a new Smart Hub.
7. Follow on-screen instructions in the ATA App.
8. Upon completion, test the opener operation through the ATA App.

Troubleshooting

Caring for your Opener

Preventative servicing of your garage door and opener is important. Your garage door is made up of numerous moving parts designed to lift and lower your door safely and efficiently.
Ongoing preventative servicing ensures that your door continues to function within factory specifications, greatly reduces the risk of failure and repair bills down the track, and ensures you maintain your Warranty.
Refer to your Owners Opener Handbook for your service schedule
Refer to the installation manual for monthly testing procedures in Section 12 to ensure the garage door is fit for use.

Need a Service Call?

If the opener needs service please call the dealer who installed the garage door opener (their contact details are usually on a sticker on the back of your garage door).

For product assistance, general inquiry, or more information, please visit: ataaust.com.au or call 1300 133 944.

References

• Automatic Technology Australia: Automatic Garage Door Openers | Gate Openers - Automatic Technology AU

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>