automatic TECHNOLOGY GDO-11 Ero Sectional Door Openers Instruction Manual
- June 3, 2024
- automatic TECHNOLOGY
Table of Contents
GDO-11Ero®
Sectional Door Openers
Quick Operation Guide
USER OPERATING CONTROLS
Button | Function |
---|---|
1 | Open / Stop / Close |
2 | Flashes when a code is being stored or when a remote control button is |
pressed.
3| For storing or erasing remote control button code to switch the courtesy
light on or off.
4| Illuminates when Service is due.
5| Flashes as the door opens and remains on when opened.
6| Flashes as the door closes and remains on when closed.
7| Is used during installation.
Used to re-intialise the opener.
MANUAL DOOR OPERATION
TO DISENGAGE THE OPENER
It is recommended to disengsgre the door with the door in the closed position.
CAUTION: When the opener is manually disengaged, the door is no longer locked. To lock the door manually, re-engage the opener after the door is closed.
TO ENGAGE THE OPENER
CAUTION: Do not use the string handle as a mechanism to open the door. Failure to comply may cause serious injury.
CODING A REMOTE CONTROL
The opener can only be operated from remote controllers that have been programmed into its memory. Up to 64 remotes can be programmed.
REMOTELY CODING A REMOTE CONTROL
Remotely coding works when you have a pre-coded remote control and are in
range of the opener.
CHANGING A BATTERY
Battery Type: 1 x CR2032.
WARNING!: The battery is hazardous and must be kept out of reach of children. The battery can cause severe of fatal injuries within 2 hours or less if swallowed or placed inside any part of the body. If you suspect the battery has be swallowed or placed inside any part of the body, SEEK IMMEDIATE medical attention.
SMART PHONE CONTROL
(require Smart Hub)
The Smart Phone Control works via your home’s WiFi network. Initial setup
involves linking your phone app and smart opener to your home network.
WARNING!: This device allows for operation of the door when not in line- of-sight of the door and opener. The door may operate unexpectedly, therefore do not allow anything to stay in or near the path of the door.
BEFORE YOU START
TROUBLESHOOTING
Symptom | Possible cause | Remedy |
---|---|---|
The opener does not work from the remote | The opener does not have power The |
battery in the remote control is flat
The remote button is not programmed to operate the door. Door Code LED is
flashing yet the opener is not working.| Replace the battery
Plug a device of similar voltage (e.g. a hairdryer) into the powerpoint and
check it is OK.
Code in the remote control button
Ensure the correct button on the transmitter is being pressed.
One remote works but the other/s do not| Faulty remote control
Flat battery| Replace remote control
Replace battery
The motor is running but
the door remains stationary| The opener is disengaged| Re-engage the opener
The remote range varies or is
restricted| Variations are normal depending on conditions e.g. temperature or
external interference
The battery life is exhausted| Make sure you can see the door when you use the
remote control Check the battery status as per section 4 of this guide
The opener light does not work.| LED has failed| Contact dealer to organise
LED to be changed.
The door reverses for no apparent reason| If Safety beams are installed they
may be partially obstructed| Ensure the beam path is not obstructed. Check the
alignment of the beams
Auto-Close not working| Safety Beam or wiring faulty| Contact your dealer for
support
CARING FOR YOUR OPENER
Preventative servicing of your garage door and opener is important. Your
garage door is made up of numerous moving parts designed to lift and lower
your door safely and efficiently.
Ongoing preventative servicing ensures that your door continues to function
within factory specifications, greatly reduces the risk of failure and repair
bills down the track, and ensure you maintain your Warranty.
Refer to your Owners Opener Handbook for your service schedule available HERE.
Refer to the installation manual for monthly testing procedures in Section 12
to ensure garage door is fit for use available HERE.
Online warranty details are available HERE.
NEED A SERVICE CALL?
If the opener needs a service please call the dealer who installed the garage door opener (their contact details are usually on a sticker on the back of your garage door).
For product assistance, general enquiry or
more information, please visit: ata-aust.com.au
or call 1300 133 944.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>