Whirlpool Front Load Washer with Load and Go Dispenser User Guide
- June 6, 2024
- Whirlpool
Table of Contents
Whirlpool Front Load Washer with Load and Go Dispenser User Guide
IMPORTANT: Dimensional specifications are provided for planning purposes only.
ELECTRICAL REQUIREMENTS
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS and INSTALLATION INSTRUCTIONS, located in your appliance’s Owner’s Manual, before installing and operating this appliance.
PRODUCT DIMENSIONS
FRONT VIEW
SIDE VIEW
BACK VIEW
All Dimensions show recommended spacing allowed, except for closet door ventilation openings which are minimum required.
This washer has been tested for installation with spacing of 0″ (0 mm) clearance on the sides. Consider allowing more space for ease of installation and servicing, and spacing for companion appliances and clearances for walls, doors, and floor moldings. Add spacing of 1″ (25 mm) on all sides of washer to reduce noise transfer. If a closet door or louvered door is installed, top and bottom air openings in door are required.
*For additional details (or information) specific to your model, refer to your Quick Start Guide.
CUSTOM UNDER COUNTER INSTALLATION
RECESSED AREA OR CLOSET INSTALLATION
NOTE: All 27″ wide washers should have 19″ clearance, while all 29″ wide washers should have 22″ clearance.
®/TM ©2020 Whirlpool. All rights reserved. Used under licence in Canada.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>