AZHNAV A1 Car Adapter User Manual
- June 12, 2024
- AZHNAV
Table of Contents
**AZHNAV A1 Car Adapter User Manual
**
INSTRUCTION
Step 1:
Insert the device into the original car’s Carplay USB interface
Step 2:
use iPhone to match Bluetooth. The Bluetooth name is smartBox-XXXX
Step 3:
after the connection is successful, the mobile phone will display a CarPlay
on-board window. Click the button to enter the CarPlay interface.
Download log:
If there is a fault, connect Bluetooth with your mobile phone and input it in
Safari http://192.168.1.101 Enter the equipment information, find the download
log and send the files to our staff.
Equipment upgrade: The equipment can be upgraded by plugging in USB 5V power supply, such as mobile phone charger and vehicle cigarette lighter (plugging in the CarPlay USB port of the original vehicle for upgrading will lead to failure to upgrade)
Upgrade via cigarette lighter USB
USB upgrade via mobile phone charger
Through the original car CarPlay USB
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>