amazon P8AT8Z Fire 7 Tablet User Manual
- June 3, 2024
- Amazon
Table of Contents
amazon P8AT8Z Fire 7 Tablet
Product Information
Product Specifications
- Model Number: P8AT8Z
- Electrical Rating: 5.2 VDC; Max 1.8A
- Operating temperature: 0°C to 35°C
- Connectivity: Dual Band Wi-Fi (2.4 GHz / 5 GHz); 802.11 a/b/g/n/ac; BT BDR/EDR, BLE.
Quick Start Information
Included In-Box:
- Device
- Power Adapter
- USB Cable
Activate Device:
Step 1: Power on the device by pressing and releasing the power button on
top left.
Step 2: Follow instructions on the screen to complete the set up and
enable the features.
Connecting Device to Network:
Step 1: Tap the Quick Settings icon located on the Status bar to display
settings for the most commonly performed tasks
Step 2: Select your network from the list of displayed SSID
Step 3: If required, input password
Safety and Compliance Information
Using Your Device Around Other Electronic Devices
- The Device, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices.
- While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals.
- There are some places where RF signals could constitute a hazard, such as health care facilities, and construction sites. If you are not sure, look around for signs indicating that two-way radios or mobile phones should be turned off.
FCC Compliance Information
Radio Frequency Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications that are not expressly approved by the party
responsible for compliance could make the device no longer comply with the FCC
Rules.
Information on your device is on file with the FCC and can be found by
inputting your device’s FCC ID, which can be found on the back of Device, into
the FCC ID Search form available at
transition.fcc.gov/oet/ea/fccid.
IC Compliance Information
Radio Frequency Information
This device complies with Industry Canada’s license-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device could automatically discontinue transmission in case of absence of
information to transmit, or operational failure. Note that this is not
intended to prohibit transmission of control or signaling information or the
use of repetitive codes where required by the technology.
This device for operation in the band 5150–5250 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite
systems.
Information Regarding Exposure to Radio Frequency Energy
This equipment complies with IC RSS-102 RF exposure limits set forth for an
uncontrolled environment.
CAN ICES-3(B)/NMB-3(B)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>