kami YWS12020 Wire Free Outdoor Camera 2 Installation Guide
- June 6, 2024
- Kami
Table of Contents
kami YWS12020 Wire Free Outdoor Camera 2
What’s in the box
Get to know your camera
Getting started
Step 1
Rotate and remove the front facing part of the camera while holding the back
cover stationary.
Step 2
Insert the battery according to the proceeding illustration.
Press the button to remove the battery. Step 3
Once the battery is installed, replace the back cover and rotate to secure.
WARNING:
The lithium battery provided is rechargeable. Before installing the battery
into the camera, please fully charge the battery with the included USB power
cable before use.
Note: we cannot guarantee the safety of other brands of batteries or
chargers.
Pairing your camera
Step 1
Download the Kami Home App
Note : You must register a Kami account before you can log in.
Step 2
Log into your Kami Home App, tap the “+” sign and select Kami Wire-Free
Outdoor Camera 2.
Step 3
Ensure that your cell phone is on the 2.4GHz WiFi network.
Step 4
Press the Operating Button to power on the device. When the light blinks and
“Waiting to connect” is heard, tap “I heard ‘Waiting to connect'”on your
screen.
Step 5
2.4GHz Wi-Fi required.
“Enter your Wi-Fi network password and tap the ” “Please connect to Wi-Fi””
button.
A QR code will appear on you phone’s screen. Point the QR code towards the
camera lens until you hear the following voice prompts “”QR code is
successful, connecting to Wi-Fi”” and “”Wi-Fi is connected””.”
Step 6
Tap “Next” step. You will hear the voice prompt “Pairing is successful”.
Step 7
Create a name for the camera. This can be a custom name or the location of
the camera. Click Finish to complete the pairing process.
Your Kami Wire-Free Outdoor Camera 2 is now ready to use.
Mounting instructions
Step 1
Use the provided anchors and screws to mount the wall mount base. If the wall
is wooden, you can screw the mount directly.
Step 2
Attach your camera to the camera base and secure it by rotating clockwise.
Step 3
Adjust the camera’s view angle to your preferred position.
While mounting, pay attention to the following:
- Avoid installing the camera with the camera lens facing direct sunlight.
- Mind any plants or objects that may obstruct the view.
- We suggest you mount the camera within a 33 foot (10 meter) range of your Wi-Fi router. The shorter the distance between your Wi-Fi router and your camera, the better the performance of your camera.
- If you do not want to mount your camera to a wall, use the included camera stand to place your camera anywhere.
Notice
- Before operating the camera, make sure to fully charge the included battery.
- Extreme weather conditions can affect battery effeciency. Please check the ambient temperature. We suggest only operating the camera between 14° to 122° Degrees Fahrenheit.
- After a long period of use, the weather-resistant ring in your camera may weaken. If you notice any damage or weakness, please replace it.
Specifications
- Operating Temperature: – 4°F~122°F (-20°C~50°C ) Maximum Resolution: ×1080
- Lens: Wide Angle
- Audio: Built-in Mic/Speaker, full duplex
- Video Compression: H.264 High Profile Enhancement: 3D Noise Reduction
- Alert Mode: PIR, Human Detection
- Power Consumption: 5W (Max)
- Night Vision: IR Cut+Infrared LEDs
- Support Platform: Android /iOS
- WiFi: 2.4GHz, 802.11 bgn
- Wireless Security: WEP/WPA/WPA2
- Battery Capacity: 13400mAh Lithium Battery x1 Weather-Resistant: IP65
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>