EDM PRODUCT 33937 3-in-1 Industrial Fan Instruction Manual
- June 6, 2024
- EDM PRODUCT
Table of Contents
- EDM PRODUCT 33937 3-in-1 Industrial Fan
- SECURITY INSTRUCTIONS
- GENERAL INFORMATION
- IMPORTANT SAFETY INSTRUCTIONS
- FEATURES
- PARTS OF THE FAN
- ASSEMBLY INSTRUCTIONS FOR THE BASE AND THE BODY
- Mounting with the column
- Assemble the tubular feet structure as shown
- Fix the drive unit to the assembled tubular feet structure.
- FAN OPERATION
- CLEANING AND MAINTENANCE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EDM PRODUCT 33937 3-in-1 Industrial Fan
SECURITY INSTRUCTIONS
Read this manual carefully before using the device and save it for future reference. To reduce possible risk of fire, electric shock or personal injury, keep in mind the following instructions:
GENERAL INFORMATION
- Before operating this appliance, read the following instructions. Keep the manual in a safe place so you can consult it at any time.
- After removing the packaging, check that the appliance is in good condition, and if you have any questions, do not turn it on.
- Contact your distributor or seller for the return of the appliance.
- This device is packed for protection against any damage or damage that may be caused by transportation.
- The packaging is made up of plastics and other materials that can be dangerous. Keep out of reach of children. These materials are recyclable and must be delivered in a unit of the appropriate recycling, respecting the environmental laws.
- This appliance has been designed for DOMESTIC USE only and must not be used with any other appliance, such as for example in a commercial, industrial or any other non-residential installation.
- Do not handle the appliance with wet hands and do not immerse it in water or any other liquid.
- Unplug the appliance from the mains before cleaning it.
- This device is not intended to be used by people (including children) with reduced physical capacities, sensory or mental, or lack of experience and knowledge, unless they have received instructions regarding use of the device or are accompanied by a responsible person
- Keep the device out of the reach of children under 8 years.
- Children should be supervised during use, to make sure they do not play with the appliance.
- Do not continue using the appliance if you notice that it is not working properly. Turn it off immediately and look for the manufacturer or an authorized technical service so that a qualified technician can evaluate the damage and repair it if necessary.
- If the power cord is damaged, it must be replaced by the manufacturer or by a qualified technician to avoid the risk of electric shock.
- Turn off the appliance and disconnect the power cord from the power outlet before replacing any part or accessory, or before touching the moving parts of the device.
IMPORTANT SAFETY INSTRUCTIONS
- Connect the device only to an AC power source. The voltage indicated on the rating plate that is on the device, must match the voltage of the power supply.
- Always disconnect the appliance from the socket after use, to disassemble or clean it.
- Always mount and use the appliance on a stable and secure surface.
- Never place the appliance on or near heat sources, such as a gas / electric stove or inside a hot oven. Keep the power cord away from these sources of heat or sharp objects.
- Never handle the power cord with wet hands.
- The use of accessories or parts not recommended by the manufacturer may cause a fire, an electric shock or serious injuries.
- This device is manufactured to be used indoors. Never use it outdoors or in outside parts of the house.
FEATURES
- Power: 80W
- Speed: 3 levels
- Fixed or oscillating position
- Security grille
- Diameter of the blades: 45cm
- Heights: min.110 – max.130cm
PARTS OF THE FAN
- Drive unit
- Blade
- Front grid
- Back grid
- Column
- Front base bar
- Base
- Rear base bars (2pcs)
- Embellisher
- Screws for fixing the column
- Screws for fixing feet
- Hangers
- Base stabilizers
ASSEMBLY INSTRUCTIONS FOR THE BASE AND THE BODY
- Remove all packaging carefully. Avoid scratching the plastic covers with scissors or knives.
- Follow the steps shown in the diagram to assemble the engine unit.
Mounting with the column
Assemble the tubular feet structure as shown
Fix the drive unit to the assembled tubular feet structure.
FAN OPERATION
- Place the fan on a flat and dry surface.
- Before connecting the device to the network, make sure that the switch is in the “0” position.
- Plug the power cord into the 220 / 240V – 50Hz AC outlet.
- With the 3-speed system you can turn on the fan. This system is designed to give you the maximum flexibility. You can also activate the oscillation function using the oscillation switch.
POSITION 0: position at OFF
POSITION 1: first speed
POSITION 2: second speed
POSITION 3: third speed
OSCILLATION: oscillation button /fixed position
- If you do not use the fan for a long time, unplug the cord from the electrical outlet.
- Never try to disassemble the device from the engine.
- If you notice any anomaly (such as unusual fan noise), turn off the device and unplug it immediately.
- Make sure that no objects or liquids enter the inside of the fan through the openings in your box.
- The fan should only be used in dry environments.
- Protect the device from dust, moisture, sunlight and direct heat.
CLEANING AND MAINTENANCE
- Make sure that the appliance is switched off before cleaning it.
- Clean with a soft damp cloth, without detergent, aggressive liquids or solvents.
- Do not immerse the fan in water or any other liquid.
- If the fan is not going to be used for a long period of time, clean and protect it and keep it in a dry place.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>