EDM PRODUCT 33510 Stand Fan Instruction Manual

: June 13, 2024
: EDM PRODUCT

Table of Contents

GENERAL INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
FEATURES
PARTES DEL VENTILADOR
ASSEMBLY INSTRUCTIONS
FUNCTIONING
IMPORTANT NOTES
CLEANING AND MAINTENANCE
Documents / Resources

Instruction manual Stand fan
Ref. 33510

Read this manual carefully before using the device and save it for future reference. To reduce possible risk of fire, electric shock or personal injury, keep in mind the following instructions:

GENERAL INFORMATION

This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given appropriate supervision or training concerning use of the appliance in a safe and They understand the dangers involved. Children must not play with the appliance. Cleaning and maintenance to be carried out by the user must not be carried out by children without supervision.
If the power cord is damaged, it must be replaced by the manufacturer or by a qualified technician to avoid the risk of electric shock.
Before operating this appliance, read the following instructions. Keep the manual in a safe place so you can consult it at any time.
After removing the packaging, check that the appliance is in good condition, and if you have any questions, do not turn it on.
Contact your distributor or seller for the return of the appliance.
This device is packed for protection against any damage or damage that may be caused by transportation.
The packaging is made up of plastics and other materials that can be dangerous. Keep out of reach of children. These materials are recyclable and must be delivered in a unit of the appropriate recycling, respecting the environmental laws.
This appliance has been designed for DOMESTIC USE only and must not be used with any other appliance, such as for example in a commercial, industrial or any other non-residential installation.
Do not handle the appliance with wet hands and do not immerse it in water or any other liquid.
Unplug the appliance from the mains before cleaning it.
Do not continue using the appliance if you notice that it is not working properly. Turn it off immediately and look for the manufacturer or an authorized technical service so that a qualified technician can evaluate the damage and repair it if necessary.
Turn off the appliance and disconnect the power cord from the power outlet before replacing any part or accessory, or before touching the moving parts of the device.

IMPORTANT SAFETY INSTRUCTIONS

Connect the device only to an AC power source. The voltage indicated on the rating plate that is on the device, must match the voltage of the power supply.
Always disconnect the appliance from the socket after use, to disassemble or clean it.
Always mount and use the appliance on a stable and secure surface.
Never place the appliance on or near heat sources, such as a gas / electric stove or inside a hot oven. Keep the power cord away from these sources of heat or sharp objects.
Never handle the power cord with wet hands.
The use of accessories or parts not recommended by the manufacturer may cause a fire, an electric shock or serious injuries.
This device is manufactured to be used indoors. Never use it outdoors or in outside parts of the house.

FEATURES

Power: 45W
Speeds: 3 levels
Fixed or oscillating position
security grill
Blade diameter: 40cm
Heights: min.100 – max.120cm

PARTES DEL VENTILADOR

Grid retaining ring
Front of the grille
Propeller fixator
Propeller
Grid holder
Back of the grid
Engine
Dashboard
Oscillation regulator
Fixing screw
Telescopic top tube (chrome)
Fix ring
Telescopic lower tube (white)
Cover
Foundation

EDM PRODUCT 33510 Stand Fan - VENTILADOR

ASSEMBLY INSTRUCTIONS

Remove all packaging carefully, avoid scratching plastic covers with scissors or knives.
Assemble the base of the fan, joining it to the lower telescopic tube.
Place on the motor shaft following the following order: the rear part of the grille, the propeller and the front part of the grille using the corresponding nuts and washers to fasten the parts as shown in the upper diagram.
To fix both grids use the ring, and fix it with the security screw.
Finally insert the part of the propeller with the motor into the telescopic tube and then use the fixing screw to hold it all together.

FUNCTIONING

▶Through the 3-speed system you can start the fan, this system is designed to give you maximum flexibility. You can also activate the oscillation function using the oscillation slider.

PPOSITION 0: OFF position, no button pressed.
POSITION 1: first gear
POSITION 2: second gear
POSITION 3: third gear
SWING: swing button / set direction (num.9)

IMPORTANT NOTES

Place the fan on a flat, dry surface.
Before connecting the device to the network, make sure that the switch is in the “0” position.
Plug the power cord into the outlet 220-240V~ 50/60Hz
If you do not use the fan for a long time, please unplug the power cord from the outlet.
Never try to disassemble the device where the motor is located.
If you notice any abnormality (such as unusual fan noise), turn off the device and unplug it immediately.
Make sure that no objects or liquids enter the interior of the fan through any openings.
The fan should only be used in dry environments.
Protect the device from dust, moisture, sunlight and direct heat.

CLEANING AND MAINTENANCE

Make sure the appliance is unplugged before cleaning.
Clean with a soft damp cloth, without detergent, aggressive liquids or solvents.
Do not immerse the fan in water or any other liquid.
If the fan is not going to be used for a long period of time, protect it and store it, or after cleaning it, in a dry place.

WASTE
This symbol on the product or in the instructions means that your electrical and electronic equipment must be disposed at the end of its useful life in a specialized container; Do not dispose it in the usual household waste container. In the EU there is special waste collection systems for subsequent recycling. For more information, contact with the local authority or the retailer from whom you purchased the product.
WARRANTY
All our products are subject to the legal warranty in force at all times regarding consumption and covers all manufacturer’s failures regarding material and quality. This warranty applies only if the instructions for use have been followed, and it is voided if the device has been forced or used improperly, or if it has been repaired by an unauthorized person.
THE INVOICE IS THE PRODUCT WARRANTY
THE MANUFACTURER DECLINES ALL RESPONSIBILITY DUE TO AN INCORRECT INSTALLATION OF THE APPLIANCE.

IMPORTED BY
www.edmproduct.com
ELEKTRO3, S.COOP.C.L
F-43389675
MADE IN CHINA